EN 61300-2-9:2010

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock

IEC 61300-2-9:2010 defines a test method to reveal eventual mechanical weakness and/or degradation of fibre optic devices when subjected to non-repetitive mechanical shocks. It simulates infrequent non-repetitive shocks likely to be encountered in normal service or during transportation. Specific technical changes from the previous edition are to reconsider the apparatus, procedure and severity.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-9: Untersuchungen und Messungen - Schock

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-9: Essais - Chocs

La CEI 61300-2-9:2010 définit une méthode d'essai en vue de mettre en évidence d'éventuelles faiblesses mécaniques et/ou dégradations des dispositifs à fibres optiques lorsqu'ils sont soumis à des chocs mécaniques non répétitifs. Cette procédure consiste à simuler les chocs peu fréquents non répétitifs qui sont susceptibles d'être rencontrés dans des conditions normales de fonctionnement ou au cours du transport. Les modifications techniques spécifiques par rapport à l'édition précédente consiste en la reconsidération du matériel, de la procédure et de la sévérité.",PE

Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-9. del: Preskusi - Šok (IEC 1300-2-9:2010)

Ta del IEC 61300 opredeljuje preskusno metodo za razkritje možne mehanske slabosti in/ali razgradnje optičnih elementov, kadar so podvrženi neponovljivim mehanskim šokom. Simulira neredne neponovljive šoke, do katerih verjetno pride med običajno uporabo ali med prevozom.

General Information

• Status: Withdrawn
• Publication Date: 02-Dec-2010
• Withdrawal Date: 31-Oct-2011
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Parallel Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 10-Feb-2018
• Completion Date: 10-Feb-2018
• Ref Project: SIST EN 61300-2-9:2011 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock (IEC 61300-2-9:2010)

Relations

• Replaces: EN 61300-2-9:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
• Effective Date: 29-Jan-2023
• Replaced By: EN 61300-2-9:2017 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
• Effective Date: 22-Mar-2016
• Corrected By: EN 61300-2-9:2010/AC:2011 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-9:2011
01-januar-2011
1DGRPHãþD
SIST EN 61300-2-9:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXVQLLQPHULOQL
SRVWRSNLGHO3UHVNXVLâRN,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-9: Tests - Shock (IEC 61300-2-9:2010)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-9: Untersuchungen und Messungen - Schock (IEC 61300-2-
9:2010)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-9: Essais - Chocs (CEI 61300-2-
9:2010)
Ta slovenski standard je istoveten z: EN 61300-2-9:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-9:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-2-9:2011

---------------------- Page: 2 ----------------------

SIST EN 61300-2-9:2011

EUROPEAN STANDARD
EN 61300-2-9

NORME EUROPÉENNE
December 2010
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-9:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-9: Tests - Shock
(IEC 61300-2-9:2010)


Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Méthodes fondamentales d'essais et de Bauteile -
mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-9: Essais - Chocs Teil 2-9: Untersuchungen
(CEI 61300-2-9:2010) und Messungen - Schock
(IEC 61300-2-9:2010)




This European Standard was approved by CENELEC on 2010-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-9:2010 E

---------------------- Page: 3 ----------------------

SIST EN 61300-2-9:2011
EN 61300-2-9:2010 - 2 -
Foreword
The text of document 86B/3068/FDIS, future edition 2 of IEC 61300-2-9, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-9 on 2010-11-01.
This European Standard supersedes EN 61300-2-9:1997.
Specific technical changes from EN 61300-2-9:1997 are to reconsider the apparatus, procedure and
severity.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-9:2010 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61300-2-9:2011
- 3 - EN 61300-2-9:2010
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the ed
...