EN 60966-4:2003

Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies

Relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). Establishes uniform requirements for testing the electrical, mechanical and environmental properties of semi-rigid coaxial cable assemblies composed of semi-rigid coaxial cables and coaxial connectors.

Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 4: Rahmenspezifikation für halbstarre konfektionierte Koaxialkabel

Ensembles de cordons coaxiaux et de cordons pour fréquences radioélectriques - Partie 4: Spécification intermédiaire pour cordons coaxiaux semi-rigides

Concerne les cordons coaxiaux semi-rigides fonctionnant dans le mode électromagnétique transversal (TEM). Etablit des prescriptions uniformes pour l'essai des propriétés électriques, mécaniques et d'environnement des cordons coaxiaux semi-rigides composés de câbles coaxiaux semi-rigides et de connnecteurs coaxiaux.

Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:2003)

General Information

• Status: Published
• Publication Date: 30-Oct-2003
• Withdrawal Date: 30-Sep-2006
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: CLC/TC 46X - Communication cables
• Drafting Committee: CLC/SC 46XA - Coaxial cables
• Parallel Committee: IEC/SC 46A - IEC_SC_46A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 31-Oct-2003
• Completion Date: 31-Oct-2003
• Ref Project: SIST EN 60966-4:2004 - Radio frequency and coaxial cable assemblies -- Part 4: Sectional specification for semi-rigid coaxial cable assemblies

Relations

• Replaces: EN 60966-4:1994 - Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
• Effective Date: 28-Jan-2023
• Revised: EN IEC 60966-4:2024 - Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
• Effective Date: 26-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60966-4:2004

STANDARD
april 2004
Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for
semi-rigid coaxial cable assemblies (IEC 60966-4:2003)
ICS 33.120.10 Referenčna številka
SIST EN 60966-4:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60966-4
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2003

ICS 33.120.10 Supersedes EN 60966-4:1994


English version


Radio frequency and coaxial cable assemblies
Part 4: Sectional specification for semi-rigid coaxial cable assemblies
(IEC 60966-4:2003)


Ensembles de cordons coaxiaux  Konfektionierte Koaxial- und
et de cordons pour fréquences Hochfrequenzkabel
radioélectriques Teil 4: Rahmenspezifikation für halbstarre
Partie 4: Spécification intermédiaire konfektionierte Koaxialkabel
pour cordons coaxiaux semi-rigides (IEC 60966-4:2003)
(CEI 60966-4:2003)


This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60966-4:2003 E

---------------------- Page: 2 ----------------------

EN 60966-4:2003 - 2 -
Foreword
The text of document 46A/551/FDIS, future edition 2 of IEC 60966-4, prepared by SC 46A, Coaxial
cables, of IEC TC 46, Cables, wires, waveguides, r.f. connectors, r.f. and microwave passive
components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60966-4 on 2003-10-01.
This European Standard supersedes EN 60966-4:1994.
The major change with respect to EN 60966-4:1994 is the reference to the 1999 edition of the generic
specification EN 60966-1.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01
This sectional specification is to be read with EN 60966-1:1999, Radio frequency and coaxial cable
assemblies – Part 1: Generic specification - General requirements and test methods.
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60966-4:2003 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60966-4:2003
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60096-2 1988 Radio-frequency cables - Part 2: - -
Relevant cable specifications

IEC 60410 1973 Sampling plans and procedures for - -
inspection by attributes

IEC 60966-1 1999 Radio frequency and coaxial cable
...