EN 62290-2:2014
(Main)Railway applications - Urban guided transport management and command/control systems - Part 2: Functional requirements specification
Railway applications - Urban guided transport management and command/control systems - Part 2: Functional requirements specification
IEC 62290-2:2014 specifies the functional requirements of UGTMSs (Urban Guided Transport Management and Command/Control Systems) for use in urban guided passenger transport lines and networks. This part of IEC 62290 is applicable for new lines or for upgrading existing signalling and command control systems. This part of IEC 62290 is applicable to applications using: - continuous data transmission; - continuous supervision of train movements by train protection profile; - localisation of trains by external wayside equipment or reporting trains. The main technical changes with regard to the previous edition are as follows: all terms and definitions have been moved to Part 1.
Bahnanwendungen - Betriebsleit- und Zugsicherungssysteme für den städtischen schienengebundenen Personennahverkehr - Teil 2: Funktionale Anforderungsspezifikation
Applications ferroviaires - Systèmes de contrôle/commande et de gestion des transports guidés urbains - Partie 2: Spécification des exigences fonctionnelles
L'IEC 62290-2:2014 spécifie les exigences fonctionnelles des UGTMS (systèmes de contrôle/commande et de gestion des transports guidés urbains) utilisés par les lignes et les réseaux de transport guidé urbain de voyageurs. Elle est applicable aux lignes nouvelles ou à l'évolution des systèmes de signalisation et de contrôle/commande existants. La présente partie de l'IEC 62290 est applicable aux applications utilisant: - une transmission continue de données; - une supervision continue du mouvement des trains par courbe de contrôle de vitesse; - une localisation des trains par équipement au sol ou trains communicants. Les principales modifications techniques par rapport à l'édition précédente sont les suivantes: déplacement des termes et définitions dans la partie 1.
Železniške naprave - Komandno-kontrolni sistemi za upravljanje urbanega prometa - 2. del: Specifikacija funkcionalnih zahtev (IEC 62290-2:2014)
Standard EN IEC 62290-2 določa funkcionalne zahteve komandno-kontrolnih sistemov za upravljanje urbanega prometa za uporabo v mestnih vodenih potniških prevoznih linijah in omrežjih. Ta del standarda IEC 62290 se uporablja za nove linije ali za posodabljanje obstoječih signalizacijskih in komandno-kontrolnih sistemov. Ta del standarda IEC 62290 velja za uporabe z: – neprekinjenim prenosom podatkov, – neprekinjenim nadzorom gibanja vlaka s profilom zaščite vlaka, – lokalizacijo vlakov z zunanjo stransko opremo ali s poročanjem o vlakih. Ta standard se ne uporablja za obstoječe komandne in kontrolne sisteme ali projekte v teku pred datumom začetka veljavnosti tega standarda. V 2. delu standarda funkcionalne zahteve določajo okvir, v katerega naj bi se dodale podrobne funkcije, da se opredeli kakršna koli splošna ali posebna uporaba. Zaradi tega se lahko elementi dodajo za splošno ali specifično uporabo, čeprav se ta del standarda uporablja kot podlaga za opredelitev SRS, FIS in FFFIS.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2014
Železniške naprave - Komandno-kontrolni sistemi za upravljanje urbanega
prometa - 2. del: Specifikacija funkcionalnih zahtev (IEC 62290-2:2014)
Railway applications - Urban guided transport management and command/control
systems - Part 2: Functional requirements specification
Ta slovenski standard je istoveten z: EN 62290-2:2014
ICS:
03.220.30 Železniški transport Transport by rail
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 62290-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2014
ICS 45.060 Supersedes EN 62290-2:2011
English Version
Railway applications - Urban guided transport management and
command/control systems - Part 2: Functional requirements
specification
(IEC 62290-2:2014)
Applications ferroviaires - Systèmes de contrôle/commande Bahnanwendungen - Betriebsleit- und
et de gestion des transports guidés urbains - Zugsicherungssysteme für den städtischen
Partie 2: Spécification des exigences fonctionnelles schienengebundenen Personennahverkehr -
(CEI 62290-2:2014) Teil 2: Funktionale Anforderungsspezifikation
(IEC 62290-2:2014)
This European Standard was approved by CENELEC on 2014-08-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62290-2:2014 E
Foreword
The text of document 9/1914/FDIS, future edition 2 of IEC 62290-2, prepared by IEC/TC 9 "Electrical
equipment and systems for railways" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN 62290-2:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-05-14
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-08-14
the document have to be withdrawn
This document supersedes EN 62290-2:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62290-2:2014 was approved by CENELEC as a European
Standard without any modification.
- 3 - EN 62290-2:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62290-1 - Railway applications - Urban guided EN 62290-1 -
transport management and
command/control systems -
Part 1: System principles and fundamental
concepts
IEC 62290-2 ®
Edition 2.0 2014-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Railway applications – Urban guided transport management and
command/control systems –
Part 2: Functional requirements specification
Applications ferroviaires – Systèmes de contrôle/commande et de gestion des
transports guidés urbains –
Partie 2: Spécification des exigences fonctionnelles
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XB
ICS 45.060 ISBN 978-2-8322-1661-3
– 2 – IEC 62290-2:2014 © IEC 2014
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviations . 9
4 Operational concept . 9
4.1 Organisation of operation for urban guided transport . 9
4.2 Basic operational principles . 11
4.3 Principles to ensure safe route . 11
4.4 Principles to ensure safe separation of trains . 12
4.5 Principles to ensure safe speed . 12
4.6 Degraded modes of train operation . 13
5 Functions for train operation . 13
5.1 Ensure safe movement of trains . 14
5.1.1 Ensure safe route . 14
5.1.2 Ensure safe separation of trains . 17
5.1.3 Determine permitted speed . 20
5.1.4 Authorize train movement . 22
5.1.5 Supervise train movement . 25
5.1.6 Provide interface with external interlocking . 29
5.2 Drive train . 29
5.2.1 Determine operating speed profile . 30
5.2.2 Control train movement in accordance with train operating speed profile . 31
5.2.3 Stop train in station . 31
5.3 Supervise guideway . 33
5.3.1 Prevent collision with obstacles . 33
5.3.2 Prevent collisions with persons on tracks . 34
5.3.3 Protect staff on track by work zone . 38
5.4 Supervise passenger transfer . 39
5.4.1 Control train and platform doors . 39
5.4.2 Prevent injuries to persons between cars or between platform and train . 42
5.4.3 Ensure starting conditions . 42
5.5 Operate a train . 44
5.5.1 Put in or take out of operation . 44
5.5.2 Manage driving modes . 45
5.5.3 Manage movement of trains between two operational stops . 46
5.5.4 Manage depots and stabling areas . 46
5.5.5 Manage UGTMS transfer tracks . 47
5.5.6 Restrict train entry to station . 47
5.5.7 Change the travel direction . 47
5.5.8 Couple and split a train . 48
5.5.9 Supervise the status of the train . 49
5.5.10 Manage traction power supply on train. 51
5.6 Ensure detection and management of emergency situations . 52
5.6.1 React to detected fire/smoke . 52
5.6.2 React to detected derailment . 53
IEC 62290-2:2014 © IEC 2014 – 3 –
5.6.3 React to detected or suspected broken rail . 53
5.6.4 Manage passenger requests . 54
5.6.5 React to loss of train integrity . 55
5.6.6 Supervise closed and locked status of train doors . 56
6 Functions for operation management and supervision . 57
6.1 Manage the daily timetable . 57
6.1.1 Import timetables . 57
6.1.2 Select the timetable . 57
6.1.3 Modify the operational timetable . 58
6.2 Manage the train service . 58
6.2.1 Manage train missions . 58
6.2.2 Set routes automatically . 60
6.2.3 Regulate trains . 61
6.2.4 Ensure connecting services . 61
6.2.5 Manage operational disturbances . 62
6.2.6 Dispatch trains . 62
6.3 Supervise train operations . 63
6.3.1 Supervise train tracking . 63
6.3.2 Supervise trains and wayside equipment . 64
6.3.3 Supervise passengers . 65
6.4 Control traction power . 66
6.4.1 Monitor traction power supply . 66
6.4.2 Command traction power supply . 66
6.4.3 Control regenerative braking . 66
6.5 Manage the interface with the HMI . 66
6.5.1 Manage the interface with operations control HMI . 67
6.5.2 Manage the interface with the train HMI . 67
6.6 Provide interface with the communication system for passengers and staff . 67
6.7 Provide
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.