EN 60384-6-1:2005

Fixed capacitors for use in electronic equipment - Part 6-1: Blank detail specification - Fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E

A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 6-1: Vordruck für Bauartspezifikation - Festkondensatoren für Gleichspannung mit metallisierten Kunststofffolien aus Polykarbonat als Dielektrikum - Qualitätsbewertungsstufe E

Condensateurs fixes utilisés dans les équipements électroniques - Partie 6-1: Spécification particulière-cadre - Condensateurs fixes pour courant continu à diélectrique en film de polycarbonate métallisé - Niveau d'assurance E

A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications

Nespremenljivi kondenzatorji za uporabo v elektronski opremi – 6-1. del: Okvirna podrobna specifikacija – Nespremenljivi kondenzatorji z dielektrikom iz metalizirane polikarbonatne folije za enosmerne napetosti – Ocenjevalni nivo E (IEC 60384-6-1:2005)

General Information

• Status: Withdrawn
• Publication Date: 24-Oct-2005
• Withdrawal Date: 30-Jun-2010
• ICS: 31.060.30 - Paper and plastics capacitors
• Technical Committee: CLC/TC 40XA - CLC/TC 40XA
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Parallel Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Jul-2010
• Completion Date: 01-Jul-2010
• Ref Project: SIST EN 60384-6-1:2006 - Fixed capacitors for use in electronic equipment -- Part 6-1: Blank detail specification - Fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E

Relations

• Replaces: EN 130501:1998 - Blank Detail Specification: Fixed metallized polycarbonate film dielectric capacitors for direct current - Assessment level E
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60384-6-1:2006

STANDARD
februar 2006
Nespremenljivi kondenzatorji za uporabo v elektronski opremi – 6-1. del:
Okvirna podrobna specifikacija – Nespremenljivi kondenzatorji z dielektrikom
iz metalizirane polikarbonatne folije za enosmerne napetosti – Ocenjevalni
nivo E (IEC 60384-6-1:2005)
Fixed capacitors for use in electronic equipment – Part 6-1: Blank detail
specification – Fixed metallized polycarbonate film dielectric d.c. capacitors –
Assessment level E (IEC 60384-6-1:2005)
ICS 31.060.10 Referenčna številka
SIST EN 60384-6-1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60384-6-1
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2005

ICS 31.060.30 Supersedes EN 130501:1998


English version


Fixed capacitors for use in electronic equipment
Part 6-1: Blank detail specification –
Fixed metallized polycarbonate film dielectric d.c. capacitors –
Assessment level E
(IEC 60384-6-1:2005)


Condensateurs fixes utilisés  Festkondensatoren zur Verwendung
dans les équipements électroniques in Geräten der Elektronik
Partie 6-1: Spécification particulière-cadre – Teil 6-1: Vordruck für Bauartspezifikation –
Condensateurs fixes pour courant continu  Festkondensatoren für Gleichspannung
à diélectrique en film de polycarbonate mit metallisierten Kunststofffolien aus
métallisé – Polykarbonat als Dielektrikum –
Niveau d'assurance E Qualitätsbewertungsstufe E
(CEI 60384-6-1:2005) (IEC 60384-6-1:2005)



This European Standard was approved by CENELEC on 2005-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60384-6-1:2005 E

---------------------- Page: 2 ----------------------

EN 60384-6-1:2005 - 2 -
Foreword
The text of document 40/1589/FDIS, future edition 2 of IEC 60384-6-1, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 60384-6-1 on 2005-10-01.
This European Standard supersedes EN 130501:1998.
This standard should be read in conjunction with EN 60384-1 and EN 60384-6.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-6-1:2005 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60384-6-1:2005
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60384-1 - Fixed capacitors for use in electronic EN 60384-1 2001
(mod) equipment
Part 1: Generic specification

1) 2)
IEC 60384-6 - Part 6: Sectional specification - Fixed EN 60384-6 2005
metallized polycarbonate film dielectric
d.c. capacitors

IEC 60410 Series Sampling plans and procedures for - -
inspection by attributes




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

INTERNATIONAL IEC


STANDARD 60384-6-1





QC 300501

Second edition
2005-09

Fixed capacitors for use in electronic equipment –
Part 6-1:
Blank detail specification:
Fixed metallized polycarbonate film
dielectric d.c. capacitors –
Assessment level E

 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale M
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 5 ----------------------

– 2 – 60384-6-1  IEC:2005(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 6-1: Blank detail specification:
Fixed metallized polycarbonate film dielectric d.c. capacitors –
Assessment level E


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-6-1 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
This second edition of IEC 60384-6-1 cancels and replaces the first edition published in 1987.
It constitutes a technical revision. All changes that have been agreed upon can be
categorized as minor revisions related to tables, figures and references.
The text of this standard is based on the following documents:
FDIS Report on voting
40/1589/FDIS 40/1609/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 6 ----------------------

60384-6-1  IEC:2005(E) – 3 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The QC number that appears on the front cover of this publication is the specification number
in the IEC Quality Assessment System for Electronic Components (IECQ).
This publication should be read in conjunction with IEC 60384-1 and IEC 60384-6.
This standard forms Part 6-1 of IEC 60384 which is published under the general title Fixed
capacitors for use in electronic equipment.
Part 6 is composed as follows:
Part 6: Sectional specification – Fixed metallized polycarbonate film dielectric d.c.
capacitors
Part 6-1: Blank detail specification – Fixed metallized polycarbonate film dielectric d.c.
capacitors – Assessment level E
NOTE For the complete list of parts, see IEC 60384-6.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

A bilingual version of this publication may be issued at a later date.

---------------------- Page: 7 ----------------------

– 4 – 60384-6-1  IEC:2005(E)
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 6-1: Blank detail specification:
Fixed metallized polycarbonate film dielectric d.c. capacitors –
Assessment level E



INTRODUCTION
Blank detail specification
A blank detail specification is a supplementary document to the sectional specification and
contains requirements for style and layout and minimum content of detail specifications. Detail
specifications not complying with these requirements may not be considered as being in
accordance with IEC specifications nor shall they so be described.
In the preparation of detail specifications, the content of 1.3 of the sectional specification shall
be taken into account. The numbers between brackets on the first page correspond to the
following information which shall be inserted in the position indicated.
Identification of the detail specification
[1] The International Electrotechnical Commission or the National Standards Organization
under whose authority the detail specification is published.
[2] The IEC or National Standards number of the detail specification, date of issue and any
further information required by the national system.
[3] The number and issue number of the IEC or national generic specification.
[4] The IEC number of the blank detail specification.
Identification of
...