EN 60556:2006
(Main)Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties
Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties
Describes methods of measuring the properties used to specify polycrystalline microwave ferrites in accordance with IEC 60392 and for general use in ferrite technology. These measuring methods are intended for the investigation of materials, generally referred to as ferrites, for application at microwave frequencies.
Gyromagnetische Materialien für Mikrowellenanwendungen - Messverfahren zur Ermittlung der Eigenschaften
Matériaux gyromagnétiques destinés aux applications hyperfréquences - Méthodes de mesure des caractéristiques
La CEI 60556:2006 décrit des méthodes de mesure des propriétés utilisées pour spécifier des ferrites polycristallins pour hyperfréquences conformément à la CEI 60392 et l'utilisation générale de la technologie des ferrites. Ces méthodes de mesure sont destinées à l'étude de matériaux, les ferrites, pour lesapplications hyperfréquences. Cette deuxième édition est une consolidation de la première édition et de ses amendements 1 et 2. Elle inclut des améliorations éditoriales et des améliorations des figures. Cette publication doit être lue conjointement avec la CEI 60392:1972.
Giromagnetne snovi za uporabo pri mikrovalovnih frekvencah – Merilne metode za določene lastnosti (IEC 60556:2006)
Ta mednarodni standard opisuje metode za merjenje lastnosti, ki se uporabljajo za določitev polikristalnih mikrovalovnih feritov v skladu s standardom IEC 60392 in za splošno uporabo v tehnologiji feritov. Te merilne metode so namenjene za preiskave materialov, ki se običajno imenujejo feriti, za uporabo pri mikrovalovnih frekvencah.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2007
*LURPDJQHWQHVQRYL]DXSRUDERSULPLNURYDORYQLKIUHNYHQFDK±0HULOQHPHWRGH
]DGRORþHQHODVWQRVWL,(&
Gyromagnetic materials intended for application at microwave frequencies - Measuring
methods for properties (IEC 60556:2006)
Gyromagnetische Materialien für Mikrowellenanwendungen - Messverfahren zur
Ermittlung der Eigenschaften (IEC 60556:2006)
Materiaux gyromagnétiques destinés aux applications hyperfréquences - Méthodes de
mesure des caractéristiques (IEC 60556:2006)
Ta slovenski standard je istoveten z: EN 60556:2006
ICS:
29.100.10 Magnetne komponente Magnetic components
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60556
NORME EUROPÉENNE
June 2006
EUROPÄISCHE NORM
ICS 29.100.10
English version
Gyromagnetic materials intended for application
at microwave frequencies -
Measuring methods for properties
(IEC 60556:2006)
Materiaux gyromagnétiques destinés Gyromagnetische Materialien
aux applications hyperfréquences - für Mikrowellenanwendungen -
Méthodes de mesure des caractéristiques Messverfahren zur Ermittlung
(CEI 60556:2006) der Eigenschaften
(IEC 60556:2006)
This European Standard was approved by CENELEC on 2006-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60556:2006 E
Foreword
The text of document 51/850/FDIS, future edition 2 of IEC 60556, prepared by IEC TC 51, Magnetic
components and ferrite materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60556 on 2006-05-01.
This Standard is to be used in conjunction with IEC 60392.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-02-01
– latest date by which the national standards conflicting
(dow) 2009-05-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60556:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60556:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
IEC 60050-221 - International electrotechnical vocabulary - - -
Chapter 221: Magnetic materials and
components
IEC 60205 2006 Calculation of the effective parameters of EN 60205 2006
magnetic piece parts
IEC 60392 1972 Guide for the drafting of specifications for - -
microwave ferrites
1)
Undated reference.
INTERNATIONAL IEC
STANDARD 60556
Second edition
2006-04
Gyromagnetic materials intended
for application at microwave frequencies –
Measuring methods for properties
IEC 2006 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale XA
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
– 2 – 60556 IEC:2006(E)
CONTENTS
FOREWORD.5
1 Scope.7
2 Normative references .7
3 Terms and definitions .7
4 Saturation magnetization M .7
s
4.1 General .7
4.2 Object .8
4.3 Theory.8
4.4 Test sample .9
4.5 Measuring apparatus for the vibrating coil method (VCM).9
4.6 Measuring apparatus for the vibrating sample method (VSM) .12
4.7 Calibration.15
4.8 Measuring procedure.16
4.9 Calculation .17
4.10 Accuracy .17
4.11 Data presentation.18
5 Magnetization (at specified field strength) M .18
H
5.1 General .18
5.2 Object .18
5.3 Theory.18
5.4 Test specimen.20
5.5 Measuring apparatus.21
5.6 Calibration.23
5.7 Measuring procedure.24
5.8 Calculation .24
5.9 Accuracy .24
5.10 Data presentation.24
6 Gyromagnetic resonance linewidth ΔH and effective Landé factor g (general) .25
eff
6.1 General .25
6.2 Object .25
6.3 Theory.25
6.4 Test specimens and cavities.26
6.5 Measuring apparatus.29
6.6 Measuring procedure.29
6.7 Calculation .31
6.8 Accuracy .31
6.9 Data presentation.31
7 Gyromagnetic resonance linewidth ΔH and effective Landé factor g (at 10 GHz) .31
10 10
7.1 General .31
7.2 Object .31
7.3 Theory.31
60556 IEC:2006(E) – 3 –
7.4 Test specimen and cavity .32
7.5 Measuring apparatus.33
7.6 Measuring procedure.33
7.7 Calculation .34
7.8 Accuracy .34
7.9 Data presentation.35
8 Spin-wave resonance linewidth ΔH .35
k
8.1 General .35
8.2 Object .35
8.3 Theory.35
8.4 Test specimen and cavity .38
8.5 Measuring apparatus.39
8.6 Calibration.39
8.7 Measuring procedure.39
8.8 Calculation .40
8.9 Accuracy .40
8.10 Data presentation.40
9 Effective linewidth ΔH .40
eff
9.1 General .40
9.2 Object .40
9.3 Theory.41
9.4 Test specimen and cavity .43
9.5 Measuring apparatus.43
9.6 Calibration.44
9.7 Apparatus adjustment.44
9.8 Measuring procedure.45
9.9 Calculation .46
9.10 Accuracy .46
9.11 Data presentation.46
10 Complex permittivity ε .47
r
10.1 General .47
10.2 Object .47
10.3 Theory.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.