EN 62149-5:2011

Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs

IEC 62149-5:2009 specifies performance on the transceiver modules for asynchronous-transfer-mode passive optical network (ATM-PON) systems recommended by the International Telecommunication Union (ITU) in ITU-T Recommendation G.983.1. The main changes with respect to the previous edition are: - Normative references have been updated; - Incorrect 'Letter symbols' have been corrected; - Some 'Notes' in tables have been revised in order to harmonize with IEC 62150-2 (2004).

Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 5: ATM-PON Sende- und Empfangsmodule mit Laserdiodentreiberschaltungen und Takt- und Datenrückgewinnungs-ICs

Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement - Partie 5: Emetteurs-récepteurs ATM-PON avec programme de gestion LD et ICs CDR

La CEI 62149-5:2009 spécifie les performances applicables aux modules d'émetteurs-récepteurs pour les systèmes de réseau optique passif en mode de transfert asynchrone (ATM-PON) recommandées par l'Union Internationale de Télécommunication (UIT) dans la Recommandation UIT-T G.983.1. Les principaux changements par rapport à l'édition précédente sont: - Les références normatives ont été mises à jour; - Les symboles incorrects ont été corrigés; - Certaines 'Notes' se trouvant dans les tableaux ont été révisées afin d'être harmonisées avec la CEI 62150-2 (2004).

Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 5. del: ATM-PON oddajniki in sprejemniki z lasersko diodnim pogonom in CDR IC (IEC 62149-5:2009)

Ta del IEC 62149 določa izvedbo modulov oddajanja-sprejemanja za sisteme asihronega načina prenosa pasivnega optičnega omrežja (ATM-PON), ki jih priporoča Mednarodna zveza za telekomunikacije (ITU) in priporočilo ITU-T G.983.1.

General Information

• Status: Withdrawn
• Publication Date: 20-Jan-2011
• Withdrawal Date: 01-Jan-2014
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Sep-2023
• Completion Date: 22-Sep-2023
• Ref Project: SIST EN 62149-5:2011 - Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs (IEC 62149-5:2009)

Relations

• Replaces: EN 62149-5:2003 - Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 62149-5:2020 - Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
• Effective Date: 25-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2011
1DGRPHãþD
SIST EN 62149-5:2004
$NWLYQHNRPSRQHQWHLQQDSUDYHRSWLþQLKYODNHQ,]YHGEHQLVWDQGDUGLGHO$70
321RGGDMQLNLLQVSUHMHPQLNL]ODVHUVNRGLRGQLPSRJRQRPLQ&'5,&,(&

Fibre optic active components and devices - Performance standards - Part 5: ATM-PON
transceivers with LD driver and CDR ICs (IEC 62149-5:2009)
Aktive Lichtwellenleiterbauelemente und -geräte – Teil 5: ATM-PON Sende- und
Empfangsmodule mit Laserdiodentreiberschaltungen und Takt- und
Datenrückgewinnungs-ICs (IEC 62149-5:2009)
Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement - Partie 5:
Emetteurs-récepteurs ATM-PON avec programme de gestion LD et ICs CDR (CEI 62149
-5:2009)
Ta slovenski standard je istoveten z: EN 62149-5:2011
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62149-5
NORME EUROPÉENNE
January 2011
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 62149-5:2003

English version
Fibre optic active components and devices -
Performance standards -
Part 5: ATM-PON transceivers with LD driver and CDR ICs
(IEC 62149-5:2009)
Composants et dispositifs actifs à fibres Aktive Lichtwellenleiterbauelemente und -
optiques - geräte -
Normes de fonctionnement - Betriebsverhalten -
Partie 5: Emetteurs-récepteurs ATM-PON Teil 5: ATM-PON Sende- und
avec programme de gestion LD et ICs Empfangsmodule mit
CDR Laserdiodentreiberschaltungen und Takt-
(CEI 62149-5:2009) und Datenrückgewinnungs-ICs
(IEC 62149-5:2009)
This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62149-5:2011 E
Foreword
The text of document 86C/891/FDIS, future edition 2 of IEC 62149-5, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote
and was approved by CENELEC as EN 62149-5 on 2011-01-02.
This European Standard supersedes EN 62149-5:2003.
The main changes with respect to EN 62149-5:2003 are listed below:
– Normative references have been updated;
– Incorrect “Letter symbols” have been corrected;
– Some “Notes” in tables have been revised in order to harmonize with EN 62150-2:2004.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-10-02
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-01-02
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62149-5:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60617 series NOTE  Harmonized in EN 60617 series (not modified).
IEC 60793 series NOTE  Harmonized in EN 60793 series (partially modified).
IEC 60794 series NOTE  Harmonized in EN 60794 series (not modified).
IEC 60825 series NOTE  Harmonized in EN 60825 series (not modified).
IEC 60874 series NOTE  Harmonized in EN 60874 series (not modified).
IEC 61076 series NOTE  Harmonized in EN 61076 series (not modified).
IEC 61280 series NOTE  Harmonized in EN 61280 series (not modified).
IEC 61281-1:1999 NOTE  Harmonized as EN 61281-1:1999 (not modified).
IEC 61754 series NOTE  Harmonized in EN 61754 series (partially modified).
IEC 62007-1:1999 NOTE  Harmonized as EN 62007-1:2000 (not modified).
IEC 62007-2:1999 NOTE  Harmonized as EN 62007-2:2000 (not modified).
IEC 62148-1:2002 NOTE  Harmonized as EN 62148-1:2002 (not modified).
__________
- 3 - EN 62149-5:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60068-2-6 2007 Environmental testing - EN 60068-2-6 2008
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60068-2-27 2008 Environmental testing - EN 60068-2-27 2009
Part 2-27: Tests - Test Ea and guidance:
Shock
IEC 60825-1 2007 Safety of laser products - EN 60825-1 2007
Part 1: Equipment classification and
requirements
IEC 60950-1 (mod) 2005 Information technology equipment - Safety - EN 60950-1 2006
Part 1: General requirements + A11 2009

IEC 61000-6-3 - Electromagnetic compatibility (EMC) - EN 61000-6-3 -
Part 6-3: Generic standards - Emission
standard for residential, commercial and light-
industrial environments
IEC 61280-1-1 1998 Fibre optic communication subsystem basic EN 61280-1-1 1998
test procedures -
Part 1-1: Test procedures for general
communication subsystems - Transmitter
output optical power measurement for single-
mode optical fibre cable
1)
IEC 61280-1-3 1998 Fibre optic communication subsystem basic EN 61280-1-3 1999
test procedures -
Part 1-3: Test procedures for general
communication subsystems - Central
wavelength and spectral width measurement

IEC 61280-2-2 2008 Fibre optic communication subsystem test EN 61280-2-2 2008
procedures -
Part 2-2: Digital systems - Optical eye pattern,
waveform and extinction ratio measurement

IEC 61300-2-4 1995 Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention

1)
EN 61280-1-3 is superseded by EN 61280-1-3:2010, which is based on IEC 61280-1-3:2010.

Publication Year Title EN/HD Year

IEC 61300-2-17 2003 Fibre optic interconnecting devices and EN 61300-2-17 2003
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 2005 Fibre optic interconnecting devices and EN 61300-2-18 2005
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
IEC 61300-2-19 2005 Fibre optic interconnecting devices and EN 61300-2-19 2005
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)

IEC 61300-2-22 2007 Fibre optic interconnecting devices and EN 61300-2-22 2007
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature

2)
IEC 61300-3-6 2003 Fibre optic interconnecting devices and EN 61300-3-6 2003
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
IEC 61753-1 2007 Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance standard -
Part 1: General and guidance for performance
standards
IEC/TR 61931 - Fibre optic - Terminology - -

3)
IEC 62150-2 2004 Fibre optic active components and devices - EN 62150-2 2004
Test and measurement procedures -
Part 2: ATM-PON transceivers
ITU-T - Broadband optical access systems based on - -
Recommendation Passive Optical Networks (PON)
G.983.1
2)
EN 61300-3-6 is superseded by EN 61300-3-6:2009, which is based on IEC 61300-3-6:2008.
3)
EN 62150-2 is superseded by EN 62150-2:2011, which is based on IEC 62150-2:2010.

IEC 62149-5 ®
Edition 2.0 2009-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Performance standards –
Part 5: ATM-PON transceivers with LD driver and CDR ICs

Composants et dispositifs actifs à fibres optiques – Normes de
fonctionnement –
Partie 5: Emetteurs-récepteurs ATM-PON avec programme de gestion LD
et ICs CDR
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
U
CODE PRIX
ICS 33.180.20 ISBN 978-2-88910-634-9
– 2 – 62149-5 © IEC:2009
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Term, definitions and abbreviations .8
3.1 Terms and definitions .8
3.2 Abbreviations .9
4 Classification.9
5 Product definition .9
5.1 Description of transceiver module.9
5.2 Description of applied form.10
5.3 Block diagram .10
5.4 Absolute limiting rating .10
5.5 Functional specification .11
6 Testing .20
6.1 Characterization testing.20
6.1.1 Characterization: transmitter section .21
6.1.2 Characterization: receiver section.22
6.2 Performance testing .22
7 Environmental specifications .23
7.1 General safety.23
7.2 Laser safety .23
7.3 Electromagnetic emission.23
Annex A (informative) Measurement on tolerance to the reflected optical power
(Table 3, Item 13) .24
Annex B (informative) Logic level of alarm and shutdown signal .26
Bibliography.27

Figure 1 – Functional block diagram (example) .10
Figure 2 – Relationship of phase between clock and data signals .18
Figure 3 – Recommended electrical circuit diagram for LVTTL-type interface (example) .19
Figure 4 – Schematic drawing for defining launched optical power without input to
transmitter .19
Figure 5 – Schematic drawing for defining launched optical power without input to
transmitter .20
Figure A.1 – Model for i
...