EN 62149-5:2003

Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs

Specifies standards on the transceiver modules for asynchronous-transfer-mode passive optical network (ATM-PON) systems recommended by the international telecommunication Union (ITU) in Recommendation TG.983.1.

Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhaltensnormen - Teil 5: ATM-PON Sende- und Empfangsmodule mit Laserdiodentreiberschaltungen und Takt- und Datenrückgewinnungs-ICs

Composants et dispositifs actifs à fibres optiques - Normes de fonctionnement - Partie 5: Emetteurs-récepteurs ATM-PON avec programme de gestion LD et ICs CDR

Spécifie les prescriptions applicables aux modules d'émetteurs-récepteurs pour les systèmes de réseau optique passif en mode de transfert asynchrone (ATM-PON) recommandées par l'Union Internationale de Télécommunication (UIT) dans la Recommandation UIT-T G.983.1.

Aktivne komponente in naprave optičnih vlaken – Izvedbeni standardi – 5. del: ATM-PON oddajniki in sprejemniki z lasersko diodnim pogonom in CDR ICs* (IEC 62149-5:2003)*

General Information

• Status: Withdrawn
• Publication Date: 19-Nov-2003
• Withdrawal Date: 31-Oct-2006
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Parallel Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Jan-2014
• Completion Date: 02-Jan-2014
• Ref Project: SIST EN 62149-5:2004 - Fibre optic active components and devices - Performance standards -- Part 5: ATM-PON transceivers with LD driver and CDR ICs

Relations

• Replaced By: EN 62149-5:2011 - Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 62149-5:2004

STANDARD
september 2004
Aktivne komponente in naprave optičnih vlaken – Izvedbeni standardi – 5. del:
ATM-PON oddajniki in sprejemniki z lasersko diodnim pogonom in CDR ICs*
(IEC 62149-5:2003)*
Fibre optic active components and devices - Performance standards - Part 5: ATM-
PON transceivers with LD driver and CDR ICs (IEC 62149-5:2003)
ICS 33.180.20 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 62149-5
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2003

ICS 33.180.20
English version
Fibre optic active components and devices –
Performance standards
Part 5: ATM-PON transceivers with LD driver and CDR ICs
(IEC 62149-5:2003)
Composants et dispositifs actifs  Aktive Lichtwellenleiterbauelemente
à fibres optiques – und -geräte –
Normes de fonctionnement Betriebsverhaltensnormen
Partie 5: Emetteurs-récepteurs ATM-PON Teil 5: ATM-PON Sende- und
avec programme de gestion LD Empfangsmodule mit Laserdioden-
et ICs CDR treiberschaltungen und Takt- und
(CEI 62149-5:2003) Datenrückgewinnungs-ICs
(IEC 62149-5:2003)
This European Standard was approved by CENELEC on 2003-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62149-5:2003 E
Foreword
The text of document 86C/544/FDIS, future edition 1 of IEC 62149-5, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 62149-5 on 2003-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-11-01

Annexes designated "normative" are part of the body of the standard.
In this standard, annexes A, B and ZA are normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62149-5:2003 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60130 NOTE Harmonized in EN 60130 series (not modified).
IEC 60191 NOTE Harmonized in EN 60191 series (not modified).
IEC 60603 NOTE Harmonized in EN 60603 series (not modified).
IEC 60793 NOTE Harmonized in EN 60793 series (modified).
IEC 60794 NOTE Harmonized in EN 60794 series (modified).
IEC 60825 NOTE Harmonized in EN 60825 series (modified).
IEC 60874 NOTE Harmonized in EN 60874 series (not modified).
IEC 61076 NOTE Harmonized in EN 61076 series (not modified).
IEC 61280 NOTE Harmonized in EN 61280 series (not modified).
IEC 61281-1 NOTE Harmonized as EN 61281-1:1999 (not modified).
IEC 61754 NOTE Harmonized in EN 61754 series (modified).
IEC 62007-1 NOTE Harmonized as EN 62007-1:2000 (not modified).
IEC 62007-2 NOTE Harmonized as EN 62007-2:2000 (not modified).
IEC 62148-1 NOTE Harmonized as EN 62148-1:2002 (not modified).
__________
- 3 - EN 62149-5:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60068-2-6 - Environmental testing EN 60068-2-6 1995
Part 2: Tests - Test Fc: Vibration
(sinusoidal)
1) 2)
IEC 60068-2-27 - Part 2: Tests - Test Ea and guidance: EN 60068-2-27 1993
Shock
1) 2)
IEC 60825-1 - Safety of laser products EN 60825-1 1994
Part 1: Equipment classification,
requirements and user's guide
1) 2)
IEC 60950-1 - Information technology equipment - EN 60950-1 2001
(mod) Safety
Part 1: General requirements
1) 2)
IEC 61280-1-1 - Fibre optic communication subsystem EN 61280-1-1 1998
basic test procedures
Part 1-1: Test procedures for general
communication subsystems -
Transmitter output optical power
measurement for single-mode optical
fibre cable
1) 2)
IEC 61280-1-3 - Part 1-3: Test procedures for general EN 61280-1-3 1999
communication subsystems - Central
wavelength and spectral width
measurement
1) 2)
IEC 61280-2-2 - Part 2-2: Test procedures for digital EN 61280-2-2 1999
systems - Optical eye pattern,
waveform, and extinction ratio

1)
Undated reference.
2)
Valid edition at date of issue.

Publication Year Title EN/HD Year
1) 2)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 1997
passive components - Basic test and
measurement procedures
Part 2-4: Tests - Fibre/cable retention

IEC 61300-2-17 2003 Part 2-17: Tests - Cold EN 61300-2-17 2003

1) 2)
IEC 61300-2-18 - Part 2-18: Tests - Dry heat - High EN 61300-2-18 1997
temperature endurance
1) 2)
IEC 61300-2-19 - Part 2-19: Tests - Damp heat (steady EN 61300-2-19 1997
state)
1) 2)
IEC 61300-2-22 - Part 2-22: Tests - Change of EN 61300-2-22 1997
temperature
IEC 61300-3-6 2003 Part 3-6: Examinations and EN 61300-3-6 2003
measurements - Return loss
1) 2)
IEC 61753-1-1 - Fibre optic interconnecting devices and EN 61753-1-1 2001
passive components performance
standard
Part 1-1: General and guidance -
Interconnecting devices (connectors)

1)
ITU-T - Broadband optical access systems - -
Recommendation based on Passive Optical Networks
G.983.1 (PON)
NORME CEI
INTERNATIONALE IEC
62149-5
INTERNATIONAL
Première édition
STANDARD
First edition
2003-09
Composants et dispositifs actifs
à fibres optiques –
Normes de fonctionnement –
Partie 5:
Emetteurs-récepteurs ATM-PON
avec programme de gestion LD et ICs CDR
Fibre optic active components and devices –
Performance standards –
Part 5:
ATM-PON transceivers with LD driver
and CDR ICs
 IEC 2003 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
y compris la photocopie et les photocopying and microfilm, without permission in writing from
électronique ou mécanique,
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
U
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

62149-5 © IEC:2003 – 3 –
CONTENTS
FOREWORD.7
INTRODUCTION.11
1 Scope.13
2 Normative references .13
3 Terms, definitions and abbreviations .15
3.1 Terms and definitions .15
3.2 Abbreviations .17
4 Classification.17
5 Product definition.17
5.1 Description of transceiver module.17
5.2 Description of applied form .19
5.3 Block diagram .19
5.4 Absolute limiting rating .23
5.5 Functional specification .25
6 Testing .41
6.1 Characterization testing.41
6.2 Performance testing .45
7 Environmental specifications .45
7.1 General safety.45
7.2 Laser safety.45
7.3 Electromagnetic emission.47
Annex A (normative) Measurement on tolerance to the reflected optical power
(Table 3, Parameter 13) .49
Annex B (normative) Logic level of alarm and shutdown signal .53
Bibliography.55
Figure 1 – Functional block diagram (example) .21
Figure 2 – Relationship of phase between clock and data signals .37
Figure 3 – Recommended electrical circuit diagram for TLVTTL-type interface (example) .39
Figure 4 – Schematic drawing for defining launched optical power without input
to transmitter .39
Figure 5 – Schematic drawing for defining the influence of signal reflection on
transmission characteristics .41
Figure A.1 – Model for incidence into ONU receiver .49
Figure A.2 – An example system to measure tolerance to the reflected optical power .51
Figure A.3 – A recommended system to measure tolerance to the reflected optical power .51

62149-5 © IEC:2003 – 5 –
Table 1 – Absolute maximum ratings. 23
Table 2 – Operating environment . 25
Table 3 – Electrical and optical characteristics . 27
Table 4 – Electrical interface characteristics (PECL type). 33
Table 5 – Electrical interface characteristics (TLVTTL type) . 35
Table 6 – Electrical interface characteristics of alarm output voltage (TLVTTL type). 35
Table 7 – Electrical interface characteristics of alarm output voltage (LVCMOS type). 37
Table 8 – Electrical interface characteristics of shutdown input voltage (both PECL and
TLVTTL types) . 37
Table 9 – Transmitter section characterization tests . 43
Table 10 – Receiver section characterization tests . 43
Table 11 – Performance testing plan . 45

62149-5 © IEC:2003 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___
...