EN 60679-6:2011

Quartz crystal controlled oscillators of assessed quality - Part 6: Phase jitter measurement method for quartz crystal oscillators and SAW oscillators - Application guidelines

IEC 60679-6:2011 applies to the phase jitter measurement of quartz crystal oscillators and SAW oscillators used for electronic devices and gives guidance for phase jitter that allows the accurate measurement of r.m.s. jitter. In the measurement method, phase noise measurement equipment or a phase noise measurement system is used. The measuring frequency range is from 10 MHz to 1 000 MHz. This standard applies to quartz crystal oscillators and SAW oscillators used in electronic devices and modules that have the multiplication or division functions based on these oscillators. The type of phase jitter applied to these oscillators is the r.m.s. jitter. This standard cancels and replaces IEC/PAS 60679-6 published in 2008. This first edition constitutes a technical revision.

Quarzoszillatoren mit bewerteter Qualität - Teil 6: Phasenjitter-Messverfahren für Quarzoszillatoren und OFW-Oszillatoren - Leitfaden für die Anwendung

Oscillateurs pilotés par quartz sous assurance de la qualité - Partie 6: Méthode de mesure de la gigue de phase pour les oscillateurs à quartz et les oscillateurs SAW - Lignes directrices pour l'application

La CEI 60679-6:2011 s'applique à la mesure de la gigue de phase des oscillateurs à quartz et des oscillateurs SAW utilisés sur des appareils électroniques. Elle fournit également des lignes directrices sur la gigue de phase qui permet de mesurer précisément une gigue en valeurs efficaces. Dans la méthode de mesure, un appareil de mesure des bruits de phase ou un système de mesure des bruits de phase est utilisé. La gamme de fréquences mesurées s'étend de 10 MHz à 1 000 MHz. La présente norme concerne les oscillateurs à quartz et les oscillateurs SAW utilisés sur des appareils électroniques et des modules dont les fonctions de multiplication ou de division sont basées sur ces oscillateurs. Le type de gigue de phase qui s'applique à ces oscillateurs est la gigue en valeur efficace. Cette norme annule et remplace l'IEC/PAS 60679-6 publié en 2008. Cette première édition constitue une révision technique.

Kristalni oscilatorji določene kakovosti - 6. del: Metoda za merjenje faznega trepetanja kristalnih oscilatorjev in oscilatorjev SAW - Navodilo za uporabo (IEC 60679-6:2011)

Ta del serije IEC 60679 velja za merjenje faznega trepetanja kristalnih oscilatorjev in oscilatorjev SAW, uporabljenih za elektronske naprave, in podaja smernice za fazno trepetanje, ki dopušča natančno merjenje trepetanja r.m.s.
Pri metodi merjenja se uporablja oprema za merjenje faznega šuma ali sistem za merjenje faznega šuma.
Frekvenčni razpon merjenja je od 10 MHz do 1000 MHz.
Ta standard velja za kristalne oscilatorje in oscilatorje SAW, uporabljene v elektronskih napravah in modulih, katerih funkcije množenje ali deljenje so zasnovane na teh oscilatorjih. Vrsta faznega trepetanja, ki velja za te oscilatorje, je trepetanje r.m.s. V besedilu bodo ti oscilatorji in moduli zaradi preprostosti navedeni kot »oscilatorji«.

General Information

• Status: Withdrawn
• Publication Date: 21-Apr-2011
• ICS: 31.140 - Piezoelectric devices
• Technical Committee: CLC/SR 49 - Piezoelectric and dielectric devices for frequency control and selection
• Drafting Committee: IEC/TC 49 - IEC_TC_49
• Parallel Committee: IEC/TC 49 - IEC_TC_49
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Dec-2019
• Ref Project: SIST EN 60679-6:2011 - Quartz crystal controlled oscillators of assessed quality - Part 6: Phase jitter measurement method for quartz crystal oscillators and SAW oscillators - Application guidelines (IEC 60679-6:2011)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60679-6:2011
01-junij-2011
.ULVWDOQLRVFLODWRUMLGRORþHQHNDNRYRVWLGHO0HWRGD]DPHUMHQMHID]QHJD
WUHSHWDQMDNULVWDOQLKRVFLODWRUMHYLQRVFLODWRUMHY6$:1DYRGLOR]DXSRUDER,(&

Quartz crystal controlled oscillators of assessed quality - Part 6: Phase jitter
measurement method for quartz crystal oscillators and SAW oscillators - Application
guidelines (IEC 60679-6:2011)
Quarzoszillatoren mit bewerteter Qualität - Teil 6: Phasenjitter-Messverfahren für
Quarzoszillatoren und OFW-Oszillatoren - Leitfaden für die Anwendung (IEC 60679-
6:2011)
Oscillateurs pilotés par quartz sous assurance de la qualité - Partie 6: Méthode de
mesure de la gigue de phase pour les oscillateurs à quartz et les oscillateurs SAW -
Lignes directrices pour l'application (CEI 60679-6:2011)
Ta slovenski standard je istoveten z: EN 60679-6:2011
ICS:
31.140 3LH]RHOHNWULþQHLQ Piezoelectric and dielectric
GLHOHNWULþQHQDSUDYH devices
SIST EN 60679-6:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60679-6:2011

---------------------- Page: 2 ----------------------

SIST EN 60679-6:2011

EUROPEAN STANDARD
EN 60679-6

NORME EUROPÉENNE
April 2011
EUROPÄISCHE NORM

ICS 31.140


English version


Quartz crystal controlled oscillators of assessed quality -
Part 6: Phase jitter measurement method for quartz crystal oscillators and
SAW oscillators -
Application guidelines
(IEC 60679-6:2011)


Oscillateurs pilotés par quartz sous Quarzoszillatoren mit bewerteter Qualität -
assurance de la qualité - Teil 6: Phasenjitter-Messverfahren für
Partie 6: Méthode de mesure de la gigue Quarzoszillatoren und OFW-Oszillatoren -
de phase pour les oscillateurs à quartz et Leitfaden für die Anwendung
les oscillateurs SAW - (IEC 60679-6:2011)
Lignes directrices pour l'application
(CEI 60679-6:2011)




This European Standard was approved by CENELEC on 2011-04-18. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60679-6:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60679-6:2011
EN 60679-6:2011 - 2 -
Foreword
The text of document 49/935/FDIS, future edition 1 of IEC 60679-6, prepared by IEC TC 49,
Piezoelectric, Dielectric and Electrostatic Devices and Associated Materials for FrequencyControl,
Selection and Detection, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60679-6 on 2011-04-18.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-01-18
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-04-18
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60679-6:2011 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60679-6:2011
- 3 - EN 60679-6:2011
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. Fo
...