EN 60317-0-3:2008

Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire

IEC 60317-0-3:2008 gives the general requirements of enamelled round aluminium winding wires with or without a bonding layer. Technical changes from the previous edition include clarification to appearance requirements, revisions to the wire size ranges applicable to the flexibility and adherence tests, and clarification that pin hole test requirements are under consideration.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-3: Allgemeine Anforderungen - Lackisolierte Runddrähte aus Aluminiumdraht

Spécifications pour types particuliers de fils de bobinage - Partie 0-3: Exigences générales - Fil de section circulaire en aluminium émaillé

La CEI 60317-0-3:2008 donne les exigences générales pour les fils de bobinage de section circulaire en aluminium émaillé avec ou sans une couche adhérente. Les changements techniques par rapport à l'édition précédente comprennent une clarification concernant les exigences sur l'aspect, des révisions sur les gammes des dimensions des fils s'appliquant aux essais de souplesse et d'adhérence, et une clarification expliquant que les exigences relatives à la détection des microfissures en immersion sont à l'étude.

Specifikacije za posebne tipe navitij - 0-3. del: Splošne zahteve - Emajliran okrogel aluminijev vodnik (IEC 60317-0-3:2008)

General Information

• Status: Published
• Publication Date: 21-Aug-2008
• Withdrawal Date: 31-May-2011
• ICS: 29.060.10 - Wires
• Technical Committee: CLC/TC 55 - Winding wires
• Drafting Committee: IEC/TC 55 - IEC_TC_55
• Parallel Committee: IEC/TC 55 - IEC_TC_55
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 22-Aug-2008
• Completion Date: 22-Aug-2008
• Ref Project: SIST EN 60317-0-3:2008 - Specifications for particular types of winding wires -- Part 0-3: General requirements - Enamelled round aluminium wire

Relations

• Replaces: EN 60317-0-3:1998/A1:2000 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
• Effective Date: 29-Jan-2023
• Replaces: EN 60317-0-3:1998 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
• Effective Date: 29-Jan-2023
• Replaces: EN 60317-0-3:1998/A2:2004 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
• Effective Date: 28-Jan-2023
• Amended By: EN 60317-0-3:2008/A1:2013 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
• Effective Date: 28-Jan-2023
• Amended By: EN 60317-0-3:2008/A2:2019 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
• Effective Date: 17-Apr-2018
• Revised: prEN IEC 60317-0-3:2023 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
• Effective Date: 14-Feb-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-0-3:2008
01-november-2008
1DGRPHãþD
SIST EN 60317-0-3:2001
SIST EN 60317-0-3:2001/A1:2001
SIST EN 60317-0-3:2001/A2:2005
Specifikacije za posebne tipe navitij - 0-3. del: Splošne zahteve - Emajliran okrogel
aluminijev vodnik (IEC 60317-0-3:2008)
Specifications for particular types of winding wires -- Part 0-3: General requirements -
Enamelled round aluminium wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-3:
Allgemeine Anforderungen - Runddrähte aus Aluminium, lackisoliert
Spécifications pour types particuliers de fils de bobinage -- Partie 0-3: Exigences
générales - Fil de section circulaire en aluminium émaillé
Ta slovenski standard je istoveten z: EN 60317-0-3:2008
ICS:
29.060.10 Žice Wires
SIST EN 60317-0-3:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60317-0-3:2008

---------------------- Page: 2 ----------------------

SIST EN 60317-0-3:2008

EUROPEAN STANDARD
EN 60317-0-3

NORME EUROPÉENNE
August 2008
EUROPÄISCHE NORM

ICS 29.060.10 Supersedes EN 60317-0-3:1998 + A1:2000 + A2:2004


English version


Specifications for particular types of winding wires -
Part 0-3: General requirements -
Enamelled round aluminium wire
(IEC 60317-0-3:2008)


Spécifications pour types particuliers  Technische Lieferbedingungen
de fils de bobinage - für bestimmte Typen von Wickeldrähten -
Partie 0-3: Exigences générales - Teil 0-3: Allgemeine Anforderungen -
Fil de section circulaire Runddrähte aus Aluminium, lackisoliert
en aluminium émaillé (IEC 60317-0-3:2008)
(CEI 60317-0-3:2008)




This European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-0-3:2008 E

---------------------- Page: 3 ----------------------

SIST EN 60317-0-3:2008
EN 60317-0-3:2008 – 2 –
Foreword
The text of document 55/1056/FDIS, future edition 3 of IEC 60317-0-3, prepared by IEC TC 55, Winding
wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60317-0-3 on 2008-06-01.
This European Standard supersedes EN 60317-0-3:1998 + A1:2000 + A2:2004.
Technical changes from EN 60317-0-3:1998 include
– a clarification of the appearance requirements,
– revisions of the wire size ranges applicable to the flexibility and adherence tests,
– an indication that pin hole test requirements are under consideration.
This standard is to be read in conjunction with the EN 60851 series. The clause numbers used in this part
of EN 60317 are identical with the respective test numbers of EN 60851.
In case of inconsistencies between EN 60851 and this EN 60317-0-3, the latter shall prevail.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60317-0-3:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60317-25 NOTE  Harmonized as EN 60317-25:1996 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 60317-0-3:2008
– 3 – EN 60317-0-3:20
...