EN 61189-5:2006

Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies

This part of IEC 61189 is a catalogue of test methods representing methodologies and procedures that can be applied to test printed board assemblies.

Prüfverfahren für Elektromaterialien, Verbindungsstrukturen und Baugruppen - Teil 5: Prüfverfahren für bestückte Leiterplatten

Méthodes d'essai pour les matériaux électriques, les structures d'interconnexion et les ensembles - Partie 5: Méthodes d'essai des assemblages de cartes à circuit imprimé

3882746

Preskusne metode za električne materiale, tiskane plošče, povezovalne strukture in sestave – 5. del: Preskusne metode za sestave tiskanih plošč (IEC 61189-5:2006)

General Information

• Status: Published
• Publication Date: 28-Sep-2006
• Withdrawal Date: 31-Aug-2009
• ICS: 31.180 - Printed circuits and boards
• Technical Committee: CLC/SR 91 - Electronics assembly technology
• Drafting Committee: IEC/TC 91 - IEC_TC_91
• Parallel Committee: IEC/TC 91 - IEC_TC_91
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 29-Sep-2006
• Completion Date: 29-Sep-2006
• Ref Project: SIST EN 61189-5:2006 - Test methods for electrical materials, interconnection structures and assemblies -- Part 5: Test methods for printed board assemblies

Standards Content (Sample)

6/29(16., 6,67(1

67$1'$5'
GHFHPEHU
3UHVNXVQHPHWRGH]DHOHNWULþQHPDWHULDOHWLVNDQHSORãþHSRYH]RYDOQH
VWUXNWXUHLQVHVWDYH±GHO3UHVNXVQHPHWRGH]DVHVWDYHWLVNDQLKSORãþ,(&

7HVWPHWKRGVIRUHOHFWULFDOPDWHULDOVLQWHUFRQQHFWLRQVWUXFWXUHVDQGDVVHPEOLHV
3DUW7HVWPHWKRGVIRUSULQWHGERDUGDVVHPEOLHV,(&
,&6 5HIHUHQþQDãWHYLOND

6,67(1HQ
!"#$%&’( )&!*+,%- .

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61189-5

NORME EUROPÉENNE
September 2006
EUROPÄISCHE NORM

ICS 31.180


English version


Test methods for electrical materials, interconnection structures
and assemblies
Part 5: Test methods for printed board assemblies
(IEC 61189-5:2006)


Méthodes d'essais pour les matériaux Prüfverfahren für Elektromaterialien,
électriques, les structures Verbindungsstrukturen
d'interconnexion et les ensembles und Baugruppen
Partie 5: Méthodes d'essais Teil 5: Prüfverfahren
pour les cartes imprimées équipées für bestückte Leiterplatten
(CEI 61189-5:2006) (IEC 61189-5:2006)




This European Standard was approved by CENELEC on 2006-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61189-5:2006 E

---------------------- Page: 2 ----------------------

EN 61189-5:2006 - 2 -
Foreword
The text of document 91/564/FDIS, future edition 1 of IEC 61189-5, prepared by IEC TC 91, Electronics
assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 61189-5 on 2006-09-01.
This standard forms part of a series and should be used in conjunction with other parts in the same
series, under the main title Test methods for electrical materials, interconnection structures and
assemblies:
Part 1: General test methods and methodology
Part 2: Test methods for materials for interconnection structures
Part 3: Test methods for interconnection structures (printed boards)
Part 4: Test methods for electronic components assembling characteristics
Part 5: Test methods for printed board assemblies
Part 6: Test methods for materials used in electronic assemblies
It should also be read in conjunction with EN 60068, Environmental testing.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61189-5:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61189-5:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1)
IEC 60068-1 1988 Environmental testing EN 60068-1 1994
Part 1: General and guidance


2) 3)
IEC 60068-2-20 - Environmental testing HD 323.2.20 S3 1988
Part 2: Tests - Test T: Soldering


2) 3)
IEC 61189-1
...