EN 61158-5-19:2012

Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements

2012-03-22 - Publication editing allocated to [e-mail] * Project handled under parallel procedures as FprEN 61158-500 and split into 11 subparts i.e. EN 61158-5-2, 3, 10, 12, 14, 15, 18, 19, 21 and 22 * Supersedes EN 61158-5-19:2008

Industrielle Kommunikationsnetze - Feldbusse - Teil 5-19: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 19-Elemente

Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-19: Définition des services des couches d'application - Eléments de type 19

Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-19. del: Definicija opravil na aplikacijskem nivoju - Elementi tipa 19 (IEC 61158-5-19:2010

Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil šteti za »okno med ustreznimi aplikacijami«. Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 19. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja. Ta standard na abstrakten način določa zunanje vidno opravilo, ki ga zagotavlja aplikacijski nivo procesnih vodil v zvezi z a) abstraktnim modelom za določanje aplikacijskih virov (objektov), ki jih uporabniki lahko spreminjajo prek opravila aplikacijskega nivoja procesnih vodil, b) primitivnimi dejanji in dogodki opravila; c) parametri, povezanimi z vsakim primitivnim dejanjem in dogodkom, in obliko, ki jo prevzamejo; ter d) medsebojno povezavo med temi dejanji in dogodki ter njihovimi veljavnimi zaporedji. Namen tega standarda je opredeliti opravila, ki se zagotavljajo za a) uporabnika aplikacijskega nivoja procesnih vodil na meji med uporabnikom in aplikacijskim nivojem referenčnega modela procesnih vodil ter b) upravljanje sistemov na meji med aplikacijskim nivojem in upravljanje sistemov referenčnega modela procesnih vodil. Ta standard določa strukturo in opravila aplikacijskega nivoja procesnih vodil v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545). Opravila in protokole aplikacijskega nivoja procesnih vodil zagotavljajo aplikacijski osebki (AE) aplikacijskega nivoja procesnih vodil znotraj aplikacijskih procesov. Aplikacijski osebek aplikacijskega nivoja procesnih vodil sestavljata sklop objektno usmerjenih aplikacijskih opravilnih elementov (ASE) in osebek za upravljanje nivojev (LME), ki upravlja aplikacijski osebek. Aplikacijski opravilni elementi zagotavljajo komunikacijska opravila, ki delujejo na sklopu povezanih razredov objektov aplikacijskega procesa (APO). Med aplikacijske opravilne elemente aplikacijskega nivoja procesnih vodil spada aplikacijski opravilni element za upravljanje, ki zagotavlja skupen sklop opravil za upravljanje primerkov razredov aplikacijskega nivoja procesnih vodil.

General Information

• Status: Withdrawn
• Publication Date: 07-Jun-2012
• Withdrawal Date: 27-Mar-2015
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.70 - Application layer
• ICS: 35.110 - Networking
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Sep-2017
• Completion Date: 22-Sep-2017
• Mandate: M/490 - Standardisation mandate to the European Standardisation Organisations (ESOs) to support European Smart Grid deployment
• Ref Project: SIST EN 61158-5-19:2012 - Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements (IEC 61158-5-19:2010)

Relations

• Replaces: EN 61158-5-19:2008 - Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements
• Effective Date: 29-Jan-2023
• Replaced By: EN 61158-5-19:2014 - Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN 61158-5-19:2008
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-19. del:
Definicija opravil na aplikacijskem nivoju - Elementi tipa 19 (IEC 61158-5-19:2010
Industrial communication networks - Fieldbus specifications - Part 5-19: Application layer
service definition - Type 19 elements (IEC 61158-5-19:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-19: Dienstfestlegungen des
Application Layer (Anwendungsschicht) - Typ 19-Elemente (IEC 61158-5-19:2010
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-19:
Définition des services des couches d'application - Eléments de type 19 (CEI 61158-5-
19:2010
Ta slovenski standard je istoveten z: EN 61158-5-19:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61158-5-19
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-5-19:2008

English version
Industrial communication networks -
Fieldbus specifications -
Part 5-19: Application layer service definition -
Type 19 elements
(IEC 61158-5-19:2010)
Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 5-19: Définition des services des Teil 5-19: Dienstfestlegungen des
couches d'application - Application Layer (Anwendungsschicht) -
Eléments de type 19 Typ 19-Elemente
(CEI 61158-5-19:2010) (IEC 61158-5-19:2010)

This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-5-19:2012 E
Foreword
The text of document 65C/606/FDIS, future edition 2 of IEC 61158-5-19, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-5-19:2012.

The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28

standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-5-19:2008.
19:2008:
— increasing the number of supported devices (511 instead of 254);
— introducing a communication version identification;
— adding a mechanism for remote address allocation;
— introducing enhanced parameter addressing (32 bit instead of 16 bit);
— restructuring control and status word;
— improving the redundancy and hotplug features;
— improving the error handling;
— adding a multiplexing protocol (SMP: Type 19 Messaging Protocol).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-5-19:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61131-1 NOTE  Harmonized as EN 61131-1.
IEC/TR 61158-1:2010 NOTE  Harmonized as CLC/TR 61158-1:2010 (not modified).
IEC 61158-3-19:2010 NOTE  Harmonized as EN 61158-3-19:2012 (not modified).
IEC 61158-4-19:2010 NOTE  Harmonized as EN 61158-4-19:2012 (not modified).
IEC 61158-6-19:2010 NOTE  Harmonized as EN 61158-6-19:2012 (not modified).
IEC 61784-1:2010 NOTE  Harmonized as EN 61784-1:2010 (not modified).
IEC 61784-2:2010 NOTE  Harmonized as EN 61784-2:2010 (not modified).

- 3 - EN 61158-5-19:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60559 - Binary floating-point arithmetic for HD 592 S1 -
microprocessor systems
IEC 61131-3 - Programmable controllers - EN 61131-3 -
Part 3: Programming languages
IEC 61158-3-16 2007 Industrial communication networks - Fieldbus EN 61158-3-16 2008
specifications -
Part 3-16: Data-link layer service definition -
Type 16 elements
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
ISO/IEC 8824 - Information technology - Open Systems - -
Interconnection - Specification of Abstract
Syntax Notation One (ASN.1)
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure

ISO/IEC 10646-1 - Information technology - Universal Multiple-- -
Octet Coded Character Set (UCS) -
Part 1: Architecture and Basic Multilingual
Plane
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services

IEC 61158-5-19 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-19: Application layer service definition – Type 19 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
V
ICS 25.04.40; 35.100.70; 35.110 ISBN 978-2-88912-112-0
– 2 – 61158-5-19 © IEC:2010(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
1.1 Overview .7
1.2 Specifications.8
1.3 Conformance.8
2 Normative references .8
3 Terms, definitions, abbreviations, symbols and conventions .9
3.1 ISO/IEC 7498-1 terms .9
3.2 ISO/IEC 8822 terms .9
3.3 ISO/IEC 9545 terms .9
3.4 ISO/IEC 8824 terms .9
3.5 Fieldbus application-layer specific definitions .9
3.6 Abbreviations and symbols.11
3.7 Conventions .11
4 Concepts .14
5 Data type ASE.14
5.1 Bitstring types .15
5.2 Unsigned types .15
5.3 Integer types .16
5.4 Floating Point types.17
5.5 Structure types .17
6 Communication model specification.17
6.1 Concepts.17
6.2 ASEs.18
6.3 ARs .30
6.4 Summary of AR classes .31
6.5 Permitted FAL services by AREP role.32

Bibliography.33

Table 1 – Read service parameters.19
Table 2 – Write service parameters.20
Table 3 – Read service parameters.22
Table 4 – Write service parameters.22
Table 5 – Notify service parameters.23
Table 6 – Get network status service parameters.24
Table 7 – Get device status service parameters.25
Table 8 – Network status change report service parameters .25
Table 9 – Station status change report service parameters .26
Table 10 – Set device status service parameters .26
Table 11 – Enable RTC service parameters .27
Table 12 – Enable hotplug service parameters.28
Table 13 – Notify RTC service parameters.29

61158-5-19 © IEC:2010(E) – 3 –
Table 14 – Disable RTC service parameters .29
Table 15 – AREP (SVC) class summary.31
Table 16 – AREP (RTC-MS) class summary .31
Table 17 – AREP (RTC-CC) class summary.32
Table 18 – FAL services by AR type .32

– 4 – 61158-5-19 © IEC:2010(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 5-19: Application layer service definition –
Type 19 elements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publis
...