EN 55016-1-1:2010
(Main)Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
Supersedes EN 55016-1-1:2007 + A1:2007 + A2:2008
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 1-1: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Messgeräte
Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-1: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Appareils de mesure
Specifikacija merilnih naprav in metod za merjenje radijskih motenj in odpornosti - 1-1. del: Merilne naprave za merjenje radijskih motenj in odpornosti - Merilne naprave
Ta del CISPR 16 opredeljuje značilnosti in zmogljivost opreme za merjenje radijskih motenj v frekvenčnem razponu od 9 kHz do 18 GHz. Poleg tega so določene zahteve za specializirano opremo za prekinjena merjenja motenj. OPOMBA: V skladu z Vodilom IEC 107 je CISPR 16-1-1 osnovni EMC standard, ki ga uporabljajo odbori za izdelke IEC. Kot je navedeno v Vodilu 107, so odbori za izdelke odgovorni za določevanje uporabe tega EMC standarda. CISPR in njegovi pododbori so pripravljeni sodelovati z odbori za izdelke pri ocenjevanju vrednosti posameznih EMC preskusov za določene izdelke. Specifikacije v tem standardu veljajo za EMI sprejemnike in analizatorje spektra. Izraz »sprejemnik, ki meri«, uporabljen v tem standardu, se nanaša tako na EMI sprejemnike kot analizatorje spektra. Nadaljnje vodilo o uporabi analizatorjev spektra in sprejemnikov, ki skenirajo, se nahaja v Dodatku B katerega koli izmed naslednjih standardov: CISPR 16-2-1, CISPR 16-2-2 ali CISPR 16-2-3.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2010
1DGRPHãþD
SIST EN 55016-1-1:2007
SIST EN 55016-1-1:2007/A1:2007
SIST EN 55016-1-1:2007/A2:2008
Specifikacija merilnih naprav in metod za merjenje radijskih motenj in odpornosti -
1-1. del: Merilne naprave za merjenje radijskih motenj in odpornosti - Merilne
naprave
Specification for radio disturbance and immunity measuring apparatus and methods -
Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur
Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil
1-1: Geräte und Einrichtungen zur Messung der hochfrequenten Störaussendung
(Funkstörungen) und Störfestigkeit - Messgeräte
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 1-1:
Appareils de mesure des perturbations radioélectriques et de l'immunité aux
perturbations radioélectriques - Appareils de mesure
Ta slovenski standard je istoveten z: EN 55016-1-1:2010
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 55016-1-1
NORME EUROPÉENNE
March 2010
EUROPÄISCHE NORM
ICS 33.100.10 Supersedes EN 55016-1-1:2007 + A1:2007 + A2:2008
English version
Specification for radio disturbance and immunity measuring apparatus
and methods -
Part 1-1: Radio disturbance and immunity measuring apparatus -
Measuring apparatus
(CISPR 16-1-1:2010)
Spécifications des méthodes Anforderungen an Geräte
et des appareils de mesure und Einrichtungen sowie Festlegung
des perturbations radioélectriques der Verfahren zur Messung
et de l'immunité aux perturbations der hochfrequenten Störaussendung
radioélectriques - (Funkstörungen) und Störfestigkeit -
Partie 1-1: Appareils de mesure Teil 1-1: Geräte und Einrichtungen
des perturbations radioélectriques zur Messung der hochfrequenten
et de l'immunité aux perturbations Störaussendung (Funkstörungen)
radioélectriques - Appareils de mesure und Störfestigkeit - Messgeräte
(CISPR 16-1-1:2010) (CISPR 16-1-1:2010)
This European Standard was approved by CENELEC on 2010-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 55016-1-1:2010 E
Foreword
The text of document CIS/A/867/FDIS, future edition 3 of CISPR 16-1-1, prepared by CISPR SC A,
Radio-interference measurements and statistical methods, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 55016-1-1 on 2010-03-01.
This European Standard supersedes EN 55016-1-1:2007 + A1:2007 + A2:2008.
This main technical change with respect to EN 55016-1-1:2007 and its amendments consists of the
addition of new provisions for the use of spectrum analyzers for compliance measurements.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard CISPR 16-1-1:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[1] CISPR 16-1-2:2003 NOTE Harmonized as EN 55016-1-2:2004 (not modified).
[2] CISPR 16-1-3:2004 NOTE Harmonized as EN 55016-1-3:2006 (not modified).
[3] CISPR 16-1-4:2007 NOTE Harmonized as EN 55016-1-4:2007 (not modified).
[4] CISPR 16-1-5:2003 NOTE Harmonized as EN 55016-1-5:2004 (not modified).
[5] CISPR 16-2 series NOTE Harmonized in EN 55016-2 series (not modified).
[6] CISPR 16-2-4:2003 NOTE Harmonized as EN 55016-2-4:2004 (not modified).
[7] CISPR 16-4 series NOTE Harmonized in EN 55016-4 series (not modified).
[9] CISPR 16-4-2:2003 NOTE Harmonized as EN 55016-4-2:2004 (not modified).
__________
- 3 - EN 55016-1-1:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
CISPR 11 (mod) 2009 Industrial, scientific and medical equipment - EN 55011 2009
Radio-frequency disturbance characteristics -
Limits and methods of measurement
CISPR 14-1 2005 Electromagnetic compatibility - EN 55014-1 2006
Requirements for household appliances,
electric tools and similar apparatus -
Part 1: Emission
CISPR 16-2-1 2008 Specification for radio disturbance and EN 55016-2-1 2009
immunity measuring apparatus and methods -
Part 2-1: Methods of measurement of
disturbances and immunity - Conducted
disturbance measurements
CISPR 16-2-2 2003 Specification for radio disturbance and EN 55016-2-2 2004
+ A1 2004 immunity measuring apparatus and methods - + A1 2005
+ A2 2005 Part 2-2: Methods of measurement of + A2 2005
disturbances and immunity - Measurement of
disturbance power
CISPR 16-2-3 2006 Specification for radio disturbance and EN 55016-2-3 2006
immunity measuring apparatus and methods -
Part 2-3: Methods of measurement of
disturbances and immunity - Radiated
disturbance measurements
CISPR 16-3 2003 Specification for radio disturbance and - -
+ A1 2005 immunity measuring apparatus and methods - - -
+ A2 2006 Part 3: CISPR technical reports - -
IEC 60050-161 1990 International Electrotechnical Vocabulary - -
+ A1 1997 (IEV) - - -
+ A2 1998 Chapter 161: Electromagnetic compatibility - -
CISPR 16-1-1 ®
Edition 3.0 2010-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
Specification for radio disturbance and immunity measuring apparatus and
methods –
Part 1-1: Radio disturbance and immunity measuring apparatus – Measuring
apparatus
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques –
Partie 1-1: Appareils de mesure des perturbations radioélectriques et de
l'immunité aux perturbations radioélectriques – Appareils de mesure
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XC
CODE PRIX
ICS 33.100.10 ISBN 978-2-88910-010-1
– 2 – CISPR 16-1-1 © IEC:2010
CONTENTS
FOREWORD.6
INTRODUCTION.8
1 Scope.9
2 Normative references .9
3 Terms and definitions .10
4 Quasi-peak measuring receivers for the frequency range 9 kHz to 1 000 MHz .13
4.1 General .13
4.2 Input impedance.13
4.3 Sine-wave voltage accuracy .13
4.4 Response to pulses.13
4.4.1 Amplitude relationship (absolute calibration).13
4.4.2 Variation with repetition frequency (relative calibration) .14
4.5 Selectivity .18
4.5.1 Overall selectivity (passband).18
4.5.2 Intermediate frequency rejection ratio.19
4.5.3 Image frequency rejection ratio.19
4.5.4 Other spurious responses.20
4.6 Limitation of intermodulation effects .21
4.7 Limitation of receiver noise and internally generated spurious signals .22
4.7.1 Random noise .22
4.7.2 Continuous wave .22
4.8 Screening effectiveness .22
4.8.1 General .22
4.8.2 Limitation of radio-frequency emissions from the measuring receiver.23
4.9 Facilities for connection to a discontinuous disturbance analyzer .23
5 Measuring receivers with peak detector for the frequency range 9 kHz to 18 GHz .23
5.1 General .23
5.2 Input impedance.23
5.3 Fundamental characteristics.24
5.3.1 Bandwidth .24
5.3.2 Charge and discharge time constants ratio .24
5.3.3 Overload factor.25
5.4 Sine-wave voltage accuracy .25
5.5 Response to pulses.25
5.6 Selectivity .25
5.7 Intermodulation effects, receiver noise, and screening .26
6 Measuring receivers with average detector for the frequency range 9 kHz to
18 GHz.27
6.1 General .27
6.2 Input impedance.27
6.3 Fundamental characteristics.27
6.3.1 Bandwidth .27
6.3.2 Overload factor.27
6.4 Sine-wave voltage accuracy .28
6.5 Response to pulses.28
6.5.1 General .28
CISPR 16-1-1 © IEC:2010 – 3 –
6.5.2 Amplitude
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.