EN 60384-4:2016

Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte

IEC 60384-4:2016 applies to fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte primarily intended for d.c. applications for use in electronic equipment. It covers capacitors for long-life applications and capacitors for general-purpose applications. Capacitors for special-purpose applications may need additional requirements.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 4: Rahmenspezifikation – Aluminium-Elektrolyt-Kondensatoren mit festen (MnO2) und flüssigen Elektrolyten

Condensateurs fixes utilisés dans les équipements électroniques - Partie 4: Spécification intermédiaire - Condensateurs électrolytiques à l’aluminium, à électrolyte solide (MnO2) et non solide

L'IEC 60384-4:2016 s'applique aux condensateurs fixes électrolytiques à l'aluminium, à électrolyte solide (MnO2) et non solide, destinés principalement aux applications en courant continu dans des équipements électroniques. Elle couvre les condensateurs utilisés dans des applications de longue durée de vie et les condensateurs utilisés dans des applications d'usage général. Les condensateurs utilisés dans des applications d'usage spécial peuvent nécessiter des exigences supplémentaires.

Nespremenljivi kondenzatorji za uporabo v elektronski opremi - 4. del: Področna specifikacija - Nespremenljivi aluminijski elektrolitski kondenzatorji s trdim (MnO2) in netrdim elektrolitom (IEC 60384-4:2016)

Ta del standarda IEC 60384 se uporablja za nespremenljive aluminijske elektrolitske kondenzatorje s trdim (MnO2) in
netrdim elektrolitom, ki so namenjeni predvsem načinom uporabe, povezanim z enosmernim tokom, v elektronski opremi. Zajema kondenzatorje z dolgo življenjsko dobo in kondenzatorje za splošno uporabo. Aluminijski elektrolitski kondenzatorji za površinsko montažo niso vključeni, vendar so zajeti v standardu IEC 60384-18.
Za kondenzatorje za uporabo za posebne namene so morda potrebne dodatne zahteve.

General Information

• Status: Published
• Publication Date: 27-Oct-2016
• Withdrawal Date: 15-Sep-2019
• ICS: 31.060.50 - Aluminium electrolytic capacitors
• Technical Committee: CLC/TC 40XA - CLC/TC 40XA
• Drafting Committee: IEC/TC 40 - IEC_TC_40
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 28-Oct-2016
• Completion Date: 28-Oct-2016
• Ref Project: SIST EN 60384-4:2016 - Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyt (IEC 60384-4:2016)

Relations

• Replaces: EN 60384-4:2007 - Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
• Effective Date: 24-Mar-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2016
1DGRPHãþD
SIST EN 60384-4:2008
1HVSUHPHQOMLYLNRQGHQ]DWRUML]DXSRUDERYHOHNWURQVNLRSUHPLGHO3RGURþQD
VSHFLILNDFLMD1HVSUHPHQOMLYLDOXPLQLMVNLHOHNWUROLWVNLNRQGHQ]DWRUMLVWUGLP0Q2
LQQHWUGLPHOHNWUROLWRP,(&
Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed
aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyt (IEC 60384-
4:2016)
Ta slovenski standard je istoveten z: EN 60384-4:2016
ICS:
31.060.50 Aluminijski elektrolitni Aluminium electrolytic
kondenzatorji capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60384-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2016
ICS 31.060.50 Supersedes EN 60384-4:2007
English Version
Fixed capacitors for use in electronic equipment - Part 4:
Sectional specification - Fixed aluminium electrolytic capacitors
with solid (MnO ) and non-solid electrolyte
(IEC 60384-4:2016)
Condensateurs fixes utilisés dans les équipements Festkondensatoren zur Verwendung in Geräten der
électroniques - Partie 4: Spécification intermédiaire - Elektronik - Teil 4: Rahmenspezifikation - Aluminium-
Condensateurs électrolytiques à l'aluminium, à électrolyte Elektrolyt-Kondensatoren mit festen (MnO ) und flüssigen
solide ( MnO ) et non solide Elektrolyten
(IEC 60384-4:2016) (IEC 60384-4:2016)
This European Standard was approved by CENELEC on 2016-09-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60384-4:2016 E
European foreword
The text of document 40/2467/FDIS, future edition 5 of IEC 60384-4, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60384-4:2016.
The following dates are fixed:
(dop) 2017-06-16
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2019-09-16
the document have to be withdrawn

This document supersedes EN 60384-4:2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60384-4:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60384-18 NOTE Harmonized as EN 60384-18.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60063 -  Preferred number series for resistors and EN 60063 -
capacitors
IEC 60068-1 2013 Environmental testing -- Part 1: General EN 60068-1 2014
and guidance
IEC 60068-2-54 2006 Environmental testing - Part 2-54: Tests - EN 60068-2-54 2006
Test Ta: Solderability testing of electronic
components by the wetting balance
method
IEC 60384-1 2016 Fixed capacitors for use in electronic EN 60384-1 2016
equipment - Part 1: Generic specification
IEC 60417 -  Graphical symbols for use on equipment. - -
Index, survey and compilation of the single
sheets.
IEC 61193-2 2007 Quality assessment systems -- Part 2: EN 61193-2 2007
Selection and use of sampling plans for
inspection of electronic components and
packages
ISO 3 -  Preferred numbers; Series of preferred - -
numbers
IEC 60384-4 ®
Edition 5.0 2016-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –

Part 4: Sectional specification – Fixed aluminium electrolytic capacitors with

solid (MnO ) and non-solid electrolyte

Condensateurs fixes utilisés dans les équipements électroniques –

Partie 4: Spécification intermédiaire – Condensateurs électrolytiques à

l’aluminium, à électrolyte solide (MnO ) et non solide
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.060.50 ISBN 978-2-8322-3552-2

– 2 – IEC 60384-4:2016 © IEC 2016
CONTENTS
FOREWORD . 6
1 General . 8
1.1 Scope . 8
1.2 Object . 8
1.3 Normative references . 8
1.4 Information to be given in a detail specification . 9
1.4.1 General . 9
1.4.2 Outline drawing and dimensions . 9
1.4.3 Mounting . 9
1.4.4 Ratings and characteristics . 9
1.4.5 Marking . 10
1.5 Terms and definitions . 10
1.6 Marking . 10
1.6.1 General . 10
1.6.2 Information for marking . 10
1.6.3 Marking on capacitors . 11
1.6.4 Marking on packaging . 11
2 Preferred ratings and characteristics . 11
2.1 Preferred characteristics . 11
2.2 Preferred values of ratings . 11
2.2.1 Nominal capacitance (C ) . 11
N
2.2.2 Tolerance on nominal capacitance . 12
2.2.3 Rated voltage (U ) . 12
R
2.2.4 Category voltage (U ) . 12
C
2.2.5 Ripple voltage . 12
2.2.6 Reverse voltage . 12
2.2.7 Surge voltage ratio . 12
2.2.8 Rated ripple current . 12
3 Quality assessment procedures . 13
3.1 Primary stage of manufacture . 13
3.2 Structurally similar components . 13
3.3 Certified test records of released lots . 13
3.4 Qualification approval (QA) procedures . 13
3.4.1 General . 13
3.4.2 Qualification approval on the basis of the fixed sample size procedure . 13
3.4.3 Tests . 14
3.5 Quality conformance inspection . 26
3.5.1 Formation of inspection lots . 26
3.5.2 Test schedule . 26
3.5.3 Delayed delivery . 26
3.5.4 Assessment levels . 26
4 Test and measurement procedures . 27
4.1 Pre-conditioning (for non-solid electrolyte capacitors only) . 27
4.2 Visual examination and check of dimensions . 28
4.2.1 General . 28
4.2.2 Visual examination and check of dimensions . 28

IEC 60384-4:2016 © IEC 2016 – 3 –
4.2.3 Requirements . 28
4.3 Electrical tests . 28
4.3.1 Leakage current . 28
4.3.2 Capacitance . 28
4.3.3 Tangent of loss angle (tan δ) or equivalent series resistance (ESR) . 29
4.3.4 Impedance (if required) . 29
4.3.5 Insulation resistance of the external insulation (if required) . 30
4.3.6 Voltage proof of the external insulation (if required) . 30
4.4 Robustness of terminations . 31
4.4.1 General . 31
4.4.2 Initial inspection . 31
4.4.3 Final inspection . 31
4.5 Resistance to soldering heat . 31
4.5.1 General . 31
4.5.2 Test conditions . 31
4.5.3 Recovery . 31
4.5.4 Final inspection and requirements . 31
4.6 Solderability .
...