EN 61189-1:1997/A1:2001
(Amendment)Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 1: General test methods and methodology
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 1: General test methods and methodology
EN following parallel vote
Prüfverfahren für Elektromaterialien, Leiterplatten und andere Verbindungsstrukturen und Baugruppen - Teil 1: Allgemeine Prüfverfahren und -methodik
Méthodes d'essais pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 1: Méthodes d'essai générales et méthodologie
Test methods for electrical materials, interconnection structures and assemblies - Part 1: General test methods and methodology
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61189-1:2001/A1:2003
01-april-2003
Test methods for electrical materials, interconnection structures and assemblies -
Part 1: General test methods and methodology
Test methods for electrical materials, printed boards and other interconnection structures
and assemblies - Part 1: General test methods and methodology
Prüfverfahren für Elektromaterialien, Leiterplatten und andere Verbindungsstrukturen
und Baugruppen - Teil 1: Allgemeine Prüfverfahren und -methodik
Méthodes d'essais pour les matériaux électriques, les cartes imprimées et autres
structures d'interconnexion et ensembles - Partie 1: Méthodes d'essai générales et
méthodologie
Ta slovenski standard je istoveten z: EN 61189-1:1997/A1:2001
ICS:
31.180 7LVNDQDYH]MD 7,9 LQWLVNDQH Printed circuits and boards
SORãþH
31.190 Sestavljeni elektronski Electronic component
elementi assemblies
SIST EN 61189-1:2001/A1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61189-1:2001/A1:2003
---------------------- Page: 2 ----------------------
SIST EN 61189-1:2001/A1:2003
EUROPEAN STANDARD EN 61189-1/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2001
ICS 31.180
English version
Test methods for electrical materials, printed boards and
other interconnection structures and assemblies
Part 1: General test methods and methodology
(IEC 61189-1:1997/A1:2001)
Méthodes d'essais pour les matériaux Prüfverfahren für Elektromaterialien,
électriques, les cartes imprimées et autres Leiterplatten und andere
structures d'interconnexion et ensembles Verbindungsstrukturen und Baugruppen
Partie 1: Méthodes d'essai générales et Teil 1: Allgemeine Prüfverfahren und
méthodologie Methodik
(CEI 61189-1:1997/A1:2001) (IEC 61189-1:1997/A1:2001)
This amendment A1 modifies the European Standard EN 61189-1:1997; it was approved by CENELEC
on 2001-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61189-1:1997/A1:2001 E
---------------------- Page: 3 ----------------------
SIST EN 61189-1:2001/A1:2003
EN 61189-1:1997/A1:2001 - 2 -
Foreword
The text of document 52/887/FDIS, future amendment 1 to IEC 61189-1:1997, prepared by
IEC TC 52, Printed circuits, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A1 to EN 61189-1:1997 on 2001-10-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-07-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2004-10-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of amendment 1:2001 to the International Standard IEC 61189-1:1997 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 61189-1:2001/A1:2003
- 3 - EN 61189-1:1997/A1:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
Add:
Publication Year Title EN/HD Year
1)
IEC 60068-2-3 1969 Basic environmental testing procedures HD 323.2.3 S2 1987
Part 2: Tests - Test Ca: Damp heat,
steady state
2)
IEC 60068-2-30 1980 Part 2: Tests - Test Db and guidance: EN 60068-2-30 1999
Damp heat, cyclic (12 + 12 hour cycle)
1)
HD 323.2.3 S2 includes A1:1984 to IEC 60068-2-3.
2)
EN 60068-2-30 includes A1:1985 to IEC 60068-2-30.
---------------------- Page: 5 --
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.