EN 61810-2-1:2017
(Main)Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values
Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values
IEC 61810-2-1:2017 specifies reliability test procedures for electromechanical elementary relays when enhanced requirements for the verification of reliability apply. Particular provisions are given for relays incorporated in safety-related control systems of machinery in accordance with IEC 62061 and ISO 13849-1. For such relays, B10 values for dangerous failures (B10D values) are derived from the tests specified in this document. This edition includes the following significant technical changes with respect to the previous edition: - limitation of tests to 10 M cycles in Clause 5; - reduction of required number of test samples to 5 in specified cases; - introduction of WeiBayes analysis for routine test under Clause 4.
Elektromechanische Elementarrelais - Teil 2-1: Funktionsfähigkeit (Zuverlässigkeit) - Verfahren zum Nachweis der B10-Werte
Relais électromécaniques élémentaires - Partie 2-1: Fiabilité - Procédure de vérification des valeurs de B10
L'IEC 61810-2-1:2017 spécifie les procédures d'essai de fiabilité pour les relais électromécaniques élémentaires lorsque des exigences renforcées pour la vérification de la fiabilité s'appliquent. Des dispositions particulières sont fournies pour les relais incorporés dans les systèmes de commande relatifs à la sécurité des machines selon l'IEC 62061 et l'ISO 13849-1. Pour ces relais, les valeurs de B10 pour des défaillances dangereuses (valeurs de B10D) sont obtenues à partir des essais spécifiés dans le présent document. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - limitation des essais à 10 M de manœuvres à l'Article 5; - réduction du nombre exigé d'échantillons d'essai à 5 dans des cas spécifiés; - introduction de l'analyse de WeiBayes pour l'essai individuel de série à l'Article 4.
Osnovni elektromehanski releji - 2-1. del: Zanesljivost - Postopki za overjanje vrednosti B10
Ta del standarda IEC 61810 določa postopke za preskušanje zanesljivosti za osnovne elektromehanske releje, pri katerih se uporabljajo dopolnjene zahteve za preverjanje zanesljivosti. Za releje, vključene v varnostne sisteme krmiljenja strojev v skladu s standardoma IEC 62061 in ISO 13849-1, so podane posebne določbe. Za take releje so vrednosti B10 za nevarne okvare (vrednosti B10D) izpeljane iz preskusov, opredeljenih v tem dokumentu.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Osnovni elektromehanski releji - 2-1. del: Zanesljivost - Postopki za overjanje vrednosti B10Elektromechanische Elementarrelais - Teil 2-1: Funktionsfähigkeit (Zuverlässigkeit) - Verfahren zum Nachweis der B10-WerteRelais électromécaniques élémentaires - Partie 2-1: Fiabilité - Procédure de vérification des valeurs de B10Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values29.120.70RelejiRelaysICS:Ta slovenski standard je istoveten z:EN 61810-2-1:2017SIST EN 61810-2-1:2018en01-januar-2018SIST EN 61810-2-1:2018SLOVENSKI
STANDARDSIST EN 61810-2-1:20111DGRPHãþD
SIST EN 61810-2-1:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 61810-2-1
October 2017 ICS 29.120.70
Supersedes
EN 61810-2-1:2011
English Version
Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values (IEC 61810-2-1:2017)
Relais électromécaniques élémentaires -
Partie 2-1: Fiabilité - Procédure de vérification des valeurs de B10 (IEC 61810-2-1:2017)
Elektromechanische Elementarrelais -
Teil 2-1: Funktionsfähigkeit (Zuverlässigkeit) - Verfahren zum Nachweis der B10-Werte (IEC 61810-2-1:2017) This European Standard was approved by CENELEC on 2017-07-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61810-2-1:2017 E SIST EN 61810-2-1:2018
EN 61810-2-1:2017 2 European foreword The text of document 94/416/FDIS, future edition 2 of IEC 61810-2-1, prepared by IEC/TC 94 "All-ornothing electrical relays" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61810-2-1:2017.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-06 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-10-06
This document supersedes EN 61810-2-1:2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 61810-2-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
ISO 13849-2:2012 NOTE Harmonized as EN ISO 13849-2:2012 (not modified). SIST EN 61810-2-1:2018
EN 61810-2-1:2017 3 Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2
Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61810-1 2015
Electromechanical elementary relays -
Part 1: General and safety requirements EN 61810-1 2015
IEC 61810-2 2017
Electromechanical elementary relays -
Part 2: Reliability EN 61810-2 2017
IEC 61810-3 -
Electromechanical elemen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.