Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers

IEC 60745-2-17:2010 Deals with the safety of routers and trimmers which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools. Supplements or modifies the corresponding clauses of IEC 60745-1. This third edition cancels and replaces the second edition published in 2003, of which it constitutes a technical revision. Main changes include: Clause 8: Marking and instructions, addition of some router specific safety warnings, clarifications in Annex K, the addition of Annex M: Safety of working stands for operation with hand-held motor-operated electric tools, and editorial modifications to match with the fourth edition of IEC 60745-1.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-17: Besondere Anforderungen für Oberfräsen und Kantenfräsen

Outils électroportatifs à moteur - Sécurité - Partie 2-17: Règles particulières pour les défonceuses et les affleureuses

La CEI 60745-2-17:2010 Traite de la sécurité des défonceuses et aux affleureuses ou la tension assignée des outils n'étant pas supérieure à 250 V pour les outils à courant monophasé alternatif ou continu et à 440 V pour les outils à courant alternatif triphasé. Complète ou modifie les articles correspondants de la CEI 60745-1. Cette troisième édition annule et remplace la deuxième édition parue en 2003 dont elle constitue une révision technique. Les principaux changements comprennent: Article 8: Marquages et instructions, addition de certaines mises en garde de sécurité spécifiques aux défonceuses, clarifications en Annexe K, addition de l'Annexe M: Sécurité des plans de travail pour le fonctionnement avec des outils électroportatifs à moteur, et modifications rédactionnelles en vue de l'adaptation à la quatrième édition de la CEI 60745-1.

Električna ročna orodja - Varnost - 2-17. del: Posebne zahteve za rezkalnike in obrezovalnike (IEC 60745-2-17:2010, spremenjen)

Ta standard velja za rezkalnike in obrezovalnike.

General Information

Status
Withdrawn
Publication Date
09-Sep-2010
Withdrawal Date
31-Aug-2013
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Dec-2021
Completion Date
15-Dec-2021

Relations

Buy Standard

Standard
EN 60745-2-17:2010
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-17:2010
01-december-2010
1DGRPHãþD
SIST EN 60745-2-17:2003
SIST EN 60745-2-17:2003/A11:2007
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DUH]NDOQLNHLQ
REUH]RYDOQLNH ,(&VSUHPHQMHQ
Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for
routers and trimmers (IEC 60745-2-17:2010, modified)
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-17: Besondere
Anforderungen für Oberfräsen und Kantenfräsen (IEC 60745-2-17:2010, modifiziert)
Outils électroportatifs à moteur - Sécurité - Partie 2-17: Règles particulières pour les
défonceuses et les affleureuses (CEI 60745-2-17:2010, modifiée)
Ta slovenski standard je istoveten z: EN 60745-2-17:2010
ICS:
25.080.20 Frezalniki Boring and milling machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-17:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-17:2010

---------------------- Page: 2 ----------------------

SIST EN 60745-2-17:2010

EUROPEAN STANDARD
EN 60745-2-17

NORME EUROPÉENNE
September 2010
EUROPÄISCHE NORM

ICS 25.140.20 Supersedes EN 60745-2-17:2003 + A11:2007


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-17: Particular requirements for routers and trimmers
(IEC 60745-2-17:2010, modified)


Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-17: Règles particulières Sicherheit -
pour les défonceuses et les affleureuses Teil 2-17: Besondere Anforderungen
(CEI 60745-2-17:2010, modifiée) für Oberfräsen und Kantenfräsen
(IEC 60745-2-17:2010, modifiziert)




This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-17:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60745-2-17:2010
EN 60745-2-17:2010 - 2 -
Foreword
The text of document 116/38/FDIS, future edition 3 of IEC 60745-2-17, prepared by TC 116, Safety of
hand-held motor-operated electric tools, was submitted to the IEC-CENELEC parallel vote.
A draft amendment, prepared by the Technical Committee CENELEC TC 116, Safety of motor-
operated electric tools, was submitted to the formal vote.
The combined texts were approved by CENELEC as EN 60745-2-17 on 2010-09-01.
This European Standard supersedes EN 60745-2-17:2003 + A11:2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be implemented

at national level by publication of an identical

national standard or by endorsement
(dop) 2011-09-01

– latest date by which the national standards conflicting

with the amendment have to be withdrawn
(dow) 2013-09-01
This European Standard is divided into two parts:
Part 1: General requirements which are common to most hand-held electric motor operated tools
(for the purpose of this standard referred to simply as tools) which could come within the
scope of this standard;
Part 2: Requirements for particular types of tools which either supplement or modify the
requirements given in Part 1 to account for the particular hazards and characteristics of
these specific tools.
This draft European Standard has been prepared under Man
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.