Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines

IEC 60695-1-30:2008 provides guidance for assessing and choosing candidate materials, components or sub-assemblies for making an end-product based upon preselection testing. It describes how preselection provides comparative fire hazard test methods to evaluate the performance of a test specimen and how preselection can be used in the selection of materials, parts, components and sub-assemblies during the design stage of an end-product. The major changes with respect to the previous edition are as follows: - Further explanation given in the introduction and Scope - Clause 3 changes to the definitions - Clause 4 clarifications of the principles of product design considering preselection - Clause 5 clarifications of the advantages and limitations of preselection - Clause 6 clarifications of the aspects of preselection relative to hazard assessment - Annex A changes in the references for examples of test methods which may be relevant to preselection - Annex B changes in the illustrative example of the flowchart of the use of preselection tests for resistance to fire hazards of a specific product type. This publication has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.

Prüfungen zur Beurteilung der Brandgefahr - Teil 1-30: Anleitung zur Beurteilung der Brandgefahr von elektrotechnischen Erzeugnissen - Anwendung von Vorauswahlverfahren - Allgemeiner Leitfaden

Essais relatifs aux risques du feu - Partie 1-30: Lignes directrices pour l'évaluation des risques du feu des produits électrotechniques - Processus d'essais de présélection - Lignes directrices générales

La CEI 60695-1-30:2008 fournit des lignes directrices pour l'évaluation et le choix des matériaux, composants et sous-ensembles candidats en vue de l'élaboration d'un produit fini fondé sur des essais de présélection. Elle décrit la manière dont la présélection fournit des méthodes d'essai comparatives sur les risques du feu pour évaluer la performance d'une éprouvette et la façon dont la présélection peut être utilisée dans la sélection des matériaux, des parties, des composants et des sous-ensembles pendant la phase de conception d'un produit fini. Les principales modifications par rapport à l'édition antérieure sont indiquées ci-dessous: - Explications supplémentaires fournies dans l'introduction et le domaine d'application - Article 3 modifications apportées aux définitions - Article 4 éclaircissements des principes de conception des produits en prenant en compte la présélection - Article 5 éclaircissements des avantages et des limites de las présélection - Article 6 éclaircissements des aspects de la présélection par rapport à l'évaluation des risques - Annexe A modification des références, par exemple des méthodes d'essai qui pervent être applicables à la présélection - Annexe B modifications de l'exemple illustratif de l'organigramme d'utilisation des essais de présélection pour la résistance aux risques du feu d'un type de produit spécifique. Elle a le statut de publication fondamentale de sécurité, conformément au Guide CEI 104 et au Guide ISO/CEI 51.

Preskušanje požarne ogroženosti - 1-30. del: Vodilo za ocenjevanje požarne varnosti elektrotehniških izdelkov - Predizbira preskusnih procesov - Splošno vodilo (IEC 60695-1-30:2017)

Standard IEC 60695-1-30:2008 podaja vodilo za ocenjevanje in izbiro predlaganih materialov, komponent ali podsestavov za izdelavo končnega izdelka na podlagi predizbire preskušanja. Opisuje, kako predizbira zagotavlja primerljive preskusne metode požarne varnosti za ocenjevanje učinkovitosti preskušanca in kako se lahko predizbira uporabi pri izbiri materialov, delov, komponent in podsestavov med fazo načrtovanja končnega izdelka. Glavne spremembe glede na prejšnjo različico so naslednje:  – Dodatna razlaga v uvodu in področju uporabe  – Točka 3: spremenjene definicije  – Točka 4: pojasnila načel načrtovanja izdelka glede na predizbiro  – Točka 5: pojasnila prednosti in omejitev predizbire;  – Točka 6: pojasnila vidikov predizbire glede na oceno tveganja  – Dodatek A: spremembe referenčnih primerov preskusnih metod, ki se morda nanašajo na predizbiro  – Dodatek B: spremembe slikovnega primera diagrama poteka uporabe predizbire preskusov za požarno varnost določene vrste izdelka.  Ta publikacija ima status osnovne varnostne publikacije v skladu z vodili IEC 104 in ISO/IEC 51.

General Information

Status
Published
Publication Date
25-May-2017
Withdrawal Date
27-Mar-2020
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
26-May-2017
Completion Date
26-May-2017

Relations

Buy Standard

Standard
EN 60695-1-30:2017
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2017
1DGRPHãþD
SIST EN 60695-1-30:2009
Preskušanje požarne ogroženosti - 1-30. del: Vodilo za ocenjevanje požarne
varnosti elektrotehniških izdelkov - Predizbira preskusnih procesov - Splošno
vodilo (IEC 60695-1-30:2017)
Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical
products - Preselection testing process - General guidelines (IEC 60695-1-30:2017)
Prüfungen zur Beurteilung der Brandgefahr - Teil 1-30: Anleitung zur Beurteilung der
Brandgefahr von elektrotechnischen Erzeugnissen - Anwendung von
Vorauswahlverfahren - Allgemeiner Leitfaden (IEC 60695-1-30:2017)
Essais relatifs aux risques du feu - Partie 1-30: Lignes directrices pour l’évaluation des
risques du feu des produits électrotechniques - Processus d’essais de présélection -
Lignes directrices générales (IEC 60695-1-30:2017)
Ta slovenski standard je istoveten z: EN 60695-1-30:2017
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.020 Elektrotehnika na splošno Electrical engineering in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60695-1-30

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2017
ICS 13.220.40; 29.020 Supersedes EN 60695-1-30:2008
English Version
Fire hazard testing - Part 1-30: Guidance for assessing the fire
hazard of electrotechnical products -
Preselection testing process - General guidelines
(IEC 60695-1-30:2017)
Essais relatifs aux risques du feu - Partie 1-30: Lignes Prüfungen zur Beurteilung der Brandgefahr - Teil 1-30:
directrices pour l'évaluation des risques du feu des produits Anleitung zur Beurteilung der Brandgefahr von
électrotechniques - Processus d'essais de présélection - elektrotechnischen Erzeugnissen - Anwendung von
Lignes directrices générales Vorauswahlverfahren - Allgemeiner Leitfaden
(IEC 60695-1-30:2017) (IEC 60695-1-30:2017)
This European Standard was approved by CENELEC on 2017-03-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60695-1-30:2017 E
European foreword
The text of document 89/1350/FDIS, future edition 3 of IEC 60695-1-30, prepared by IEC/TC 89 "Fire
hazard testing" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-12-28
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-03-28
the document have to be withdrawn

This document supersedes EN 60695-1-30:2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60695-1-30:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated :
IEC 60335-1:2010 NOTE Harmonized as EN 60335-1:2012 (modified).
1)
IEC 60335-1:2010/A1:2013 NOTE Harmonized as EN 60335-1:2012/A1:201X (modified).

1) At draft stage.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60695-1-10 -  Fire hazard testing - Part 1-10: EN 60695-1-10 -
Guidance for assessing the fire hazard
of electrotechnical products - General
guidelines
IEC 60695-1-11 -  Fire hazard testing - Part 1-11: EN 60695-1-11 -
Guidance for assessing the fire hazard
of electrotechnical products - Fire
hazard assessment
IEC 60695-1-12 -  Fire hazard testing - Part 1-12: - -
Guidance for assessing the fire hazard
of electrotechnical products - Fire safety
engineering
IEC 60695-4 2012 Fire hazard testing - Part 4: Terminology EN 60695-4 2012
concerning fire tests for electrotechnical
products
IEC Guide 104 -  The preparation of safety publications - -
and the use of basic safety publications
and group safety publications
ISO/IEC Guide 51 -  Safety aspects - Guidelines for their - -
inclusion in standards
ISO 13943 2008 Fire safety - Vocabulary EN ISO 13943 2010

IEC 60695-1-30 ®
Edition 3.0 2017-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BASIC SAFETY PUBLICATION
PUBLICATION FONDAMENTALE DE SÉCURITÉ

Fire hazard testing –
Part 1-30: Guidance for assessing the fire hazard of electrotechnical products –

Preselection testing process – General guidelines

Essais relatifs aux risques du feu –

Partie 1-30: Lignes directrices pour l’évaluation des risques du feu des produits

électrotechniques – Processus d’essai de présélection – Lignes directrices

générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.220.40; 29.020 ISBN 978-2-8322-3882-0

– 2 – IEC 60695-1-30:2017 © IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Principles of product design considering preselection . 7
5 Advantages and limitations of preselection . 8
6 Aspects of preselection relative to fire hazard assessment . 9
Annex A (informative) Examples of test methods . 10
A.1 General . 10
A.2 Ignitability . 10
A.3 Flammability and flame spread. 10
A.4 Heat . 11
A.5 Smoke . 11
A.6 Toxicity . 11
A.7 Corrosion . 11
A.8 Abnormal heat . 11
A.9 Tracking index . 11
Annex B (informative) Use of preselection tests for flammability requirements for
materials used in attended electric appliances – Illustrative example . 12
Bibliography . 14

Figure B.1 – Selection and sequence of tests for resistance to fire in attended
appliances in accordance with Figure O.3 of IEC 60335-1 [1] . 13

Table 1 – Some factors which can affect fire performance in preselection tests . 8

IEC 60695-1-30:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIRE HAZARD TESTING –
Part 1-30: Guidance for assessing the fire hazard of electrotechnical
products – Preselection testing process – General guidelines

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60695-1-30 has been prepared by IEC technical committee 89:
Fire hazard testing.
This third edition cancels and rep
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.