EN IEC 60794-1-310:2022

Optical fibre cables - Part 1-310: Generic specification - Basic optical cable test procedures - Cable element test methods - Strippability, method G10

This part of IEC 60794 describes test procedures to be used in establishing uniform requirements of optical fibre cable elements for the mechanical property- strippability. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc.

Lichtwellenleiterkabel - Teil 310: Fachgrundspezifikation - Grundlegende Prüfverfahren für optische Kabel – Kabelelement-Prüfverfahren - Abisolierbarkeit, Verfahren G10

Câbles à fibres optiques - Partie 1-310: Spécification générique - Procédures fondamentales d’essai des câbles optiques - Méthodes d’essai des éléments de câbles - Dénudabilité, méthode G10

IEC 60794-1-310: 2022 décrit les procédures d’essai à utiliser pour l’établissement d’exigences uniformes pour la propriété mécanique de dénudabilité des éléments de câbles à fibres optiques. Le présent document s’applique aux câbles à fibres optiques destinés à être utilisés avec des équipements de télécommunication et des dispositifs utilisant des techniques analogues, ainsi qu'aux câbles constitués de fibres optiques d’une part et de conducteurs électriques d’autre part.Dans le présent document, l'expression "câble optique" peut également englober les unités de fibres optiques, les unités de fibres pour microconduit, etc. Le présent document annule et remplace partiellement l’IEC 60794-1-23:2019. Cette édition inclut la modification technique majeure suivante par rapport à IEC 60794-1-23:2019: ajout des fibres à structure semi-serrée dans la méthode G10C.

Optični kabli - 1-310. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Preskusne metode za kabelske elemente - Odstranljivost, metoda G10 (IEC 60794-1-310:2022)

Ta del standarda IEC 60794 opisuje preskusne postopke, ki jih je treba uporabljati pri določanju enotnih zahtev glede elementov kablov iz optičnih vlaken za mehansko lastnost – odstranljivost.
Dokument obravnava optične kable za uporabo s telekomunikacijsko opremo in napravami, ki uporabljajo podobne tehnike, ter kable s kombinacijo optičnih vlaken in električnih vodnikov.
V tem dokumentu lahko besedna zveza »optični kabel« zajema tudi optične enote, mikrokanale itd.

General Information

• Status: Published
• Publication Date: 09-Jun-2022
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: CLC/TC 86A - Optical fibres and optical fibre cables
• Drafting Committee: IEC/SC 86A - IEC_SC_86A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 10-Jun-2022
• Completion Date: 10-Jun-2022
• Ref Project: SIST EN IEC 60794-1-310:2022 - Optical fibre cables - Part 1-310: Generic specification - Basic optical cable test procedures - Cable element test methods - Strippability, method G10 (IEC 60794-1-310:2022)

Relations

• Splited From: EN IEC 60794-1-23:2019 - Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods
• Effective Date: 24-May-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2022
Nadomešča:
SIST EN IEC 60794-1-23:2020
Optični kabli - 1-310. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Odstranljivost, metoda
G10 (IEC 60794-1-310:2022)
Optical fibre cables - Part 1-310: Generic specification - Basic optical cable test
procedures - Cable element test methods - Strippability, method G10 (IEC 60794-1-
310:2022)
Lichtwellenleiterkabel - Teil 310: Fachgrundspezifikation - Grundlegende Prüfverfahren
für optische Kabel – Kabelelement-Prüfverfahren - Abisolierbarkeit, Verfahren G10 (IEC
60794-1-310:2022)
Câbles à fibres optiques - Partie 1-310: Spécification générique - Procédures
fondamentales d’essai des câbles optiques - Méthodes d’essai des éléments de câbles -
Dénudabilité, méthode G10 (IEC 60794-1-310:2022)
Ta slovenski standard je istoveten z: EN IEC 60794-1-310:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60794-1-310

NORME EUROPÉENNE
EUROPÄISCHE NORM June 2022
ICS 33.180.10 Supersedes EN IEC 60794-1-23:2019 (partially)
English Version
Optical fibre cables - Part 1-310: Generic specification - Basic
optical cable test procedures - Cable element test methods -
Strippability, method G10
(IEC 60794-1-310:2022)
Câbles à fibres optiques - Partie 1-310: Spécification Lichtwellenleiterkabel - Teil 310: Fachgrundspezifikation -
générique - Procédures fondamentales d'essai des câbles Grundlegende Prüfverfahren für optische Kabel -
optiques - Méthodes d'essai des éléments de câbles - Kabelelement-Prüfverfahren - Abisolierbarkeit, Verfahren
Dénudabilité, méthode G10 G10
(IEC 60794-1-310:2022) (IEC 60794-1-310:2022)
This European Standard was approved by CENELEC on 2022-05-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60794-1-310:2022 E

European foreword
The text of document 86A/2136/CDV, future edition 1 of IEC 60794-1-310, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-310:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-03-03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-05-31
document have to be withdrawn
This document partially supersedes EN IEC 60794-1-23:2019 and all of its amendments and
corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-310:2022 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60794-1-23:2019 NOTE Harmonized as EN IEC 60794-1-23:2019 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-1-32 2018 Optical fibres - Part 1-32: Measurement EN IEC 60793-1-32 2018
methods and test procedures - Coating
strippability
IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic EN IEC 60794-1-2 -
specification - Basic optical cable test
procedures - General guidance
IEC 60794-1-22 2017 Optical fibre cables - Part 1-22: Generic EN IEC 60794-1-22 2018
specification - Basic optical cable test
procedures - Environmental test methods

IEC 60794-1-310 ®
Edition 1.0 2022-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical fibre cables –
Part 1-310: Generic specification – Basic optical cable test procedures – Cable

element test methods – Strippability, method G10

Câbles à fibres optiques –
Partie 1-310: Spécification générique – Procédures fondamentales d’essai des

câbles optiques – Méthodes d’essai des éléments de câbles – Dénudabilité,

méthode G10
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-1104-6

– 2 – IEC 60794-1-310:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General requirements . 6
5 Method G10A: Stripping force stability of cabled optical fibres . 7
5.1 Object . 7
5.2 Sample . 7
5.2.1 Sample length . 7
5.2.2 Sample preparation . 7
5.3 Apparatus . 7
5.4 Procedure . 7
5.5 Requirements . 7
5.6 Details to be specified . 7
6 Method G10B: Strippability of optical fibre ribbons . 8
6.1 Object . 8
6.2 Sample . 8
6.3 Apparatus . 8
6.3.1 General . 8
6.3.2 Stripping tool . 8
6.3.3 Motor and slide (if used) . 8
6.4 Positioning and holding equipment . 9
6.5 Alcohol wipe . 9
6.6 Procedure . 9
6.7 Requirements . 9
6.8 Details to be specified . 10
7 Method G10C: Strippability of buffered optical fibres . 10
7.1 Object . 10
7.2 Sample . 10
7.3 Apparatus . 10
7.4 Procedure . 10
7.5 Requirements . 11
7.6 Details to be specified . 11
Bibliography . 12

Table 1 – Condition of stripped samples . 9

IEC 60794-1-310:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 1-310: Generic specification – Basic optical cable test procedures –
Cable element test methods – Strippability, method G10

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certificati
...