Optical fibre cables - Part 1-310: Generic specification - Basic optical cable test procedures - Cable element test methods - Strippability, method G10 (IEC 60794-1-310:2022)

This part of IEC 60794 describes test procedures to be used in establishing uniform requirements of optical fibre cable elements for the mechanical property- strippability.
This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors.
Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc.

Lichtwellenleiterkabel - Teil 310: Fachgrundspezifikation - Grundlegende Prüfverfahren für optische Kabel – Kabelelement-Prüfverfahren - Abisolierbarkeit, Verfahren G10 (IEC 60794-1-310:2022)

Câbles à fibres optiques - Partie 1-310: Spécification générique - Procédures fondamentales d’essai des câbles optiques - Méthodes d’essai des éléments de câbles - Dénudabilité, méthode G10 (IEC 60794-1-310:2022)

IEC 60794-1-310: 2022 décrit les procédures d’essai à utiliser pour l’établissement d’exigences uniformes pour la propriété mécanique de dénudabilité des éléments de câbles à fibres optiques. Le présent document s’applique aux câbles à fibres optiques destinés à être utilisés avec des équipements de télécommunication et des dispositifs utilisant des techniques analogues, ainsi qu'aux câbles constitués de fibres optiques d’une part et de conducteurs électriques d’autre part.Dans le présent document, l'expression "câble optique" peut également englober les unités de fibres optiques, les unités de fibres pour microconduit, etc. Le présent document annule et remplace partiellement l’IEC 60794-1-23:2019. Cette édition inclut la modification technique majeure suivante par rapport à IEC 60794-1-23:2019: ajout des fibres à structure semi-serrée dans la méthode G10C.

Optični kabli - 1-310. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Preskusne metode za kabelske elemente - Odstranljivost, metoda G10 (IEC 60794-1-310:2022)

Ta del standarda IEC 60794 opisuje preskusne postopke, ki jih je treba uporabljati pri določanju enotnih zahtev glede elementov kablov iz optičnih vlaken za mehansko lastnost – odstranljivost.
Dokument obravnava optične kable za uporabo s telekomunikacijsko opremo in napravami, ki uporabljajo podobne tehnike, ter kable s kombinacijo optičnih vlaken in električnih vodnikov.
V tem dokumentu lahko besedna zveza »optični kabel« zajema tudi optične enote, mikrokanale itd.

General Information

Status
Published
Public Enquiry End Date
30-Dec-2021
Publication Date
23-Jun-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Jun-2022
Due Date
22-Aug-2022
Completion Date
24-Jun-2022

Relations

Buy Standard

Standard
EN IEC 60794-1-310:2022
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 60794-1-310:2021
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60794-1-310:2022
01-september-2022
Nadomešča:
SIST EN IEC 60794-1-23:2020
Optični kabli - 1-310. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Preskusne metode za kabelske elemente - Odstranljivost, metoda
G10 (IEC 60794-1-310:2022)
Optical fibre cables - Part 1-310: Generic specification - Basic optical cable test
procedures - Cable element test methods - Strippability, method G10 (IEC 60794-1-
310:2022)
Lichtwellenleiterkabel - Teil 310: Fachgrundspezifikation - Grundlegende Prüfverfahren
für optische Kabel – Kabelelement-Prüfverfahren - Abisolierbarkeit, Verfahren G10 (IEC
60794-1-310:2022)
Câbles à fibres optiques - Partie 1-310: Spécification générique - Procédures
fondamentales d’essai des câbles optiques - Méthodes d’essai des éléments de câbles -
Dénudabilité, méthode G10 (IEC 60794-1-310:2022)
Ta slovenski standard je istoveten z: EN IEC 60794-1-310:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
SIST EN IEC 60794-1-310:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60794-1-310:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 60794-1-310:2022


EUROPEAN STANDARD EN IEC 60794-1-310

NORME EUROPÉENNE

EUROPÄISCHE NORM June 2022
ICS 33.180.10 Supersedes EN IEC 60794-1-23:2019 (partially)
English Version
Optical fibre cables - Part 1-310: Generic specification - Basic
optical cable test procedures - Cable element test methods -
Strippability, method G10
(IEC 60794-1-310:2022)
Câbles à fibres optiques - Partie 1-310: Spécification Lichtwellenleiterkabel - Teil 310: Fachgrundspezifikation -
générique - Procédures fondamentales d'essai des câbles Grundlegende Prüfverfahren für optische Kabel -
optiques - Méthodes d'essai des éléments de câbles - Kabelelement-Prüfverfahren - Abisolierbarkeit, Verfahren
Dénudabilité, méthode G10 G10
(IEC 60794-1-310:2022) (IEC 60794-1-310:2022)
This European Standard was approved by CENELEC on 2022-05-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60794-1-310:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60794-1-310:2022
EN IEC 60794-1-310:2022 (E)
European foreword
The text of document 86A/2136/CDV, future edition 1 of IEC 60794-1-310, prepared by SC 86A
"Fibres and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60794-1-310:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-03-03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-05-31
document have to be withdrawn
This document partially supersedes EN IEC 60794-1-23:2019 and all of its amendments and
corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60794-1-310:2022 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60794-1-23:2019 NOTE Harmonized as EN IEC 60794-1-23:2019 (not modified)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 60794-1-310:2022
EN IEC 60794-1-310:2022 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-1-32 2018 Optical fibres - Part 1-32: Measurement EN IEC 60793-1-32 2018
methods and test procedures - Coating
strippability
IEC 60794-1-2 - Optical fibre cables - Part 1-2: Generic EN IEC 60794-1-2 -
specification - Basic optical cable test
procedures - General guidance
IEC 60794-1-22 2017 Optical fibre cables - Part 1-22: Generic EN IEC 60794-1-22 2018
specification - Basic optical cable test
procedures - Environmental test methods

3

---------------------- Page: 5 ----------------------
SIST EN IEC 60794-1-310:2022

---------------------- Page: 6 ----------------------
SIST EN IEC 60794-1-310:2022



IEC 60794-1-310

®


Edition 1.0 2022-04




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE











Optical fibre cables –

Part 1-310: Generic specification – Basic optical cable test procedures – Cable

element test methods – Strippability, method G10



Câbles à fibres optiques –

Partie 1-310: Spécification générique – Procédures fondamentales d’essai des


câbles optiques – Méthodes d’essai des éléments de câbles – Dénudabilité,

méthode G10












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.180.10 ISBN 978-2-8322-1104-6




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 60794-1-310:2022
– 2 – IEC 60794-1-310:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General requirements . 6
5 Method G10A: Stripping force stability of cabled optical fibres . 7
5.1 Object . 7
5.2 Sample . 7
5.2.1 Sample length . 7
5.2.2 Sample preparation . 7
5.3 Apparatus . 7
5.4 Procedure . 7
5.5 Requirements . 7
5.6 Details to be specified . 7
6 Method G10B: Strippability of optical fibre ribbons . 8
6.1 Object . 8
6.2 Sample . 8
6.3 Apparatus . 8
6.3.1 General . 8
6.3.2 Stripping tool . 8
6.3.3 Motor and slide (if used) . 8
6.4 Positioning and holding equipment . 9
6.5 Alcohol wipe . 9
6.6 Procedure . 9
6.7 Requirements . 9
6.8 Details to be specified . 10
7 Method G10C: Strippability of buffered optical fibres . 10
7.1 Object . 10
7.2 Sample . 10
7.3 Apparatus . 10
7.4 Procedure . 10
7.5 Requirements . 11
7.6 Details to be specified . 11
Bibliography . 12

Table 1 – Condition of stripped samples . 9

---------------------- Page: 8 ----------------------
SIST EN IEC 60794-1-310:2022
IEC 60794-1-310:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

OPTICAL FIBRE CABLES –

Part 1-310: Generic specification – Basic optical cable test procedures –
Cable element test methods – Strippability, method G10

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or a
...

SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-310:2021
01-december-2021
Optični kabli - Osnovni preskusni postopki za optične kable - 310. del: Preskusne
metode za kabelske elemente - Odstranljivost, metode G10
Optical fibre cables - Basic optical cable test procedures - Part 310: Cable element test
methods - Strippability, Methods G10
Câbles à fibres optiques - Procédures fondamentales d’essai des câbles optiques -
Partie 310: Méthodes d’essai des éléments de câbles - Dénudabilité, Méthodes G10
Ta slovenski standard je istoveten z: prEN IEC 60794-1-310:2021
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-310:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60794-1-310:2021

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60794-1-310:2021
86A/2136/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-310 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2021-10-22 2022-01-14
SUPERSEDES DOCUMENTS:
86A/2095/CD, 86A/2133/CC

IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Optical fibre cables - Basic optical cable test procedures- Part 310: Cable element test
methods- Strippability, Methods G10

PROPOSED STABILITY DATE: 2024

NOTE FROM TC/SC OFFICERS:

Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60794-1-310:2021
IEC CDV 60794-1-310/Ed1 © IEC:2021 – 2 – 86A/2136/CD
1 CONTENTS
2
3 FOREWORD. 3
4 INTRODUCTION . 5
5 1 Scope . 6
6 2 Normative references . 6
7 3 Terms and definitions . 6
8 4 General requirements . 6
9 5 Method G10A: Stripping force stability of cabled optical fibres . 7
10 5.1 Object . 7
11 5.2 Sample . 7
12 5.2.1 Sample length . 7
13 5.2.2 Sample preparation . 7
14 5.3 Apparatus . 7
15 5.4 Procedure . 7
16 5.5 Requirements . 7
17 5.6 Details to be specified . 7
18 6 Method G10B: Strippability of optical fibre ribbons . 7
19 6.1 Object . 7
20 6.2 Sample . 8
21 6.3 Apparatus . 8
22 6.3.1 General . 8
23 6.3.2 Stripping tool . 8
24 6.3.3 Motor and slide (if used) . 8
25 6.4 Positioning and holding equipment . 8
26 6.5 Alcohol wipe . 8
27 6.6 Procedure . 9
28 6.7 Requirements . 9
29 6.8 Details to be specified . 9
30 7 Method G10C: Strippability of buffered optical fibres . 9
31 7.1 Object . 9
32 7.2 Sample . 10
33 7.3 Apparatus . 10
34 7.4 Procedure . 10
35 7.5 Requirements . 10
36 7.6 Details to be specified . 10
37 Bibliography . 11
38
39 Table 1 Condition of stripped samples………………………………………………………………… 9
40
41

---------------------- Page: 4 ----------------------
oSIST prEN IEC 60794-1-310:2021
IEC CDV 60794-1-310/Ed1 © IEC:2021 – 3 – 86A/2136/CD
42 INTERNATIONAL ELECTROTECHNICAL COMMISSION
43 ____________
44
45 OPTICAL FIBRE CABLES-
46
47 Basic optical cable test procedures- Part 310: Cable element test
48 methods- Strippability, Methods G10
49
50
51 FOREWORD
52 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
53 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
54 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
55 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
56 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
57 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
58 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
59 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
60 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
61 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
62 consensus of opinion on the relevant subjects since each technical committee has representation from all
63 interested IEC National Committees.
64 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
65 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
66 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
67 misinterpretation by any end user.
68 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
69 transparently to the maximum extent possible in their national and regional publications. Any divergence between
70 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
71 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
72 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
73 services carried out by independent certification bodies.
74 6) All users should ensure that they have the latest edition of this publication.
75 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
76 members of its technical committees and IEC National Committees for any personal injury, property damage or
77 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
78 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
79 Publications.
80 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
81 indispensable for the correct application of this publication.
82 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
83 rights. IEC shall not be held responsible for identifying any or all such patent rights.
84 IEC 60794-1-310 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical
85 committee 86: Fibre optics.
86 This first edition of IEC 60794-1-310 cancels and replaces Method G10A, G10B, and G10C of the
87 second edition of IEC 60794-1-23:2019, which is withdrawn. It includes an editorial revision, based on
88 the new structure and numbering system for optical fibre test methods. There are no specific technical
89 changes with respect to the previous edition.
90 The optical cable element test methods contained in IEC 60794-1-23: 2019 will now be individually
91 numbered in the IEC 60794-1-3xx series. Each test method is now considered to be an individual
92 document rather than part of a multi-test method compendium. Full cross-reference details are given in
93 IEC 60794-1-2.
94 The text of this is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD

---------------------- Page: 5 ----------------------
oSIST prEN IEC 60794-1-310:2021
IEC CDV 60794-1-310/Ed1 © IEC:2021 – 4 – 86A/2136/CD
95
96 Full information on the voting for its approval can be found in the report on voting indicated in
97 the above table.
98 The language used for the development of this […an International Standard, a Technical
99 Specification: specify document type…] is English [change language if necessary].
100 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
101 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
102 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
103 described in greater detail at www.iec.ch/standardsdev/publications.
104 The committee has decided that the contents of this document will remain unchanged until the
105 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
106 the specific document. At this date, the document will be
107 • reconfirmed,
108 • withdrawn,
109 • replaced by a revised edition, or
110 • amended.
111

---------------------- Page: 6 ----------------------
oSIST prEN IEC 60794-1-310:2021
IEC CDV 60794-1-310/Ed1 © IEC:2021 – 5 – 86A/2136/CD
112 INTRODUCTION
113 The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed
114 that compliance with this document may involve the use of a patent. IEC takes no position
115 concerning the evidence, validity, and scope of this patent right.
116 The holder of this patent right has assured IEC that s/he is willing to negotiate licences under
117 reasonable and non-discriminatory terms and conditions with applicants throughout the world.
118 In this respect, the statement of the holder of this patent right is
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.