EN 62148-11:2003
(Main)Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters
Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters
Covers physical interface specification for modulator integrated laser diode transmitters. The intent is to adequately specify the physical requirements of an optical transmitter that will enable mechanical interchangeability of transmitters complying with this standard both at the PCB and for any panel mounting requirement.
Aktive Lichtwellenleiterbauelemente und -geräte - Gehäuse- und Schnittstellennormen - Teil 11: Modular integrierte Laserdiodenmodule mit 14 Anschlüssen
Composants et dispositifs actifs en fibres optiques - Normes de boîtier et d'interface - Partie 11: Emetteurs à diode laser de 14 broches à modulateur intégré
Covers physical interface specification for modulator integrated laser diode transmitters. The intent is to adequately specify the physical requirements of an optical transmitter that will enable mechanical interchangeability of transmitters complying with this standard both at the PCB and for any panel mounting requirement.
Aktivne komponente in naprave optičnih vlaken – Standardi oblike in vmesnika– 11. del 11: laserski diodni oddajniki z integriranim modulatorjem s 14 kontakti (IEC 62148-11:2003)*
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 62148-11:2004
STANDARD
september 2004
Aktivne komponente in naprave optičnih vlaken – Standardi oblike in
vmesnika– 11. del 11: laserski diodni oddajniki z integriranim modulatorjem s
14 kontakti (IEC 62148-11:2003)*
Fibre optic active components and devices - Package and interface standards - Part
11: 14-pin modulator-integrated laser diode transmitters (IEC 62148-11:2003)
ICS 33.180.20 Referenčna številka
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
EUROPEAN STANDARD EN 62148-11
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2003
ICS 33.180.20
English version
Fibre optic active components and devices -
Package and interface standards
Part 11: 14-pin modulator-integrated laser diode transmitters
(IEC 62148-11:2003)
Composants et dispositifs actifs Aktive Lichtwellenleiterbauelemente
en fibres optiques - und -geräte -
Normes de boîtier et d'interface Gehäuse- und Schnittstellennormen
Partie 11: Emetteurs à diode laser Teil 11: Modular integrierte
de 14 broches à modulateur intégré Laserdiodenmodule mit 14 Anschlüssen
(CEI 62148-11:2003) (IEC 62148-11:2003)
This European Standard was approved by CENELEC on 2003-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62148-11:2003 E
Foreword
The text of document 86C/545/FDIS, future edition 1 of IEC 62148-11, prepared by SC 86C, Fibre optic
systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 62148-11 on 2003-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-11-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62148-11:2003 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62148-11:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60793 Series Optical fibres EN 60793-1 Series
mod
IEC 60874 Series Connectors for optical fibres and cables EN 60874 Series
1) 2)
IEC 62148-1 - Fibre optic active components and EN 62148-1 2002
devices - Package and interface
standards
Part 1: General and guidance
1)
ITU-T - Characteristics of a single-mode optical - -
Recommendation fibre cable
G.652
1)
ITU-T - Characteristics of a dispersion-shifted - -
Recommendation single-mode optical fibre cable
G.653
1)
ITU-T - Characteristics of cut-off shifted single-- -
Recommendation mode optical fibre and cable
G.654
) Undated reference.
) Valid edition at date of issue.
NORME CEI
INTERNATIONALE IEC
62148-11
INTERNATIONAL
Première édition
STANDARD
First edition
2003-09
Composants et dispositifs actifs
en fibres optiques –
Normes de boîtier et d'interface –
Partie 11:
Emetteurs à diode laser de 14 broches
à modulateur intégré
Fibre optic active components and devices –
Package and interface standards –
Part 11:
14-pin modulator-integrated
laser diode transmitters
IEC 2003 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
K
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
62148-11 IEC:2003 – 3 –
CONTENTS
FOREWORD . 5
INTRODUCTION .9
1 Scope . 11
2 Normative references. 11
3 Abbreviations. 11
4 Classification .13
5 Specification of fibre optic transmitter module. 13
5.1 Pigtail interface. 13
5.2 Electrical interface . 13
5.2.1 General. 13
5.2.2 Numbering of electrical terminals . 13
5.2.3 Electrical terminal assignment. 15
6 Outline and footprint of fibre optic transmitter module . 17
6.1 Drawing of case outline. 17
6.2 Drawings of footprint. 19
Figure 1 – Electrical terminal numbering assignments (viewed from the top of the
module). 13
Figure 2 – Case outline . 17
Figure 3 – Footprint. 19
Table 1 – Pin function definitions. 15
62148-11 IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE C
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.