IEC 60079-18:2009
(Main)Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
IEC 60079-18:2009 is available as IEC 60079-18:2009 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60079-18:2009 gives the specific requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex components with the type of protection encapsulation "m" intended for use in explosive gas atmospheres or explosive dust atmospheres. This part applies only for encapsulated electrical equipment, encapsulated parts of electrical equipment and encapsulated Ex components where the rated voltage does not exceed 11 kV. The significant technical changes with respect to the previous edition are as follows:
- Incorporation of level of protection "mc"
- Equipment protection levels (EPL Ma, Ga, Da, Mb, Gb, Db, Gc, Dc)
- Incorporation of the dust requirements
- Incorporation of switching contacts for level of protection "ma".
The contents of the corrigendum of June 2009 have been included in this copy. This publication is to be read in conjunction with IEC 60079-0:2007.
Atmosphères explosives - Partie 18: Protection du matériel par encapsulage "m"
IEC 60079-18:2009 est disponible sous forme de IEC 60079-18:2009 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
IEC 60079-18:2009 définit les exigences spécifiques à la construction, aux essais et au marquage des matériels électriques, des parties de matériels électriques et des composants Ex protégés par encapsulage de type "m" et destinés à une utilisation dans les atmosphères explosives gazeuses ou les atmosphères explosives poussiéreuses. La présente partie ne s'applique qu'aux matériels électriques protégés par encapsulage, aux parties de matériel électrique protégées par encapsulage et aux composants Ex protégés par encapsulage pour lesquels la tension assignée n'excède pas 11 kV. Les modifications techniques importantes par rapport à l'édition antérieure sont indiquées ci-dessous:
- Introduction du niveau de protection "mc"
- Niveaux de protection du matériel (EPL Ma, Ga, Da, Mb, Gb, Db, Gc, Dc)
- Introduction des exigences pour la poussière
- Introduction des contacts de commutation pour le niveau de protection "ma".
Le contenu du corrigendum de juin 2009 a été pris en considération dans cet exemplaire. Cette publication doit être lue conjointement avec la CE I 60079-0:2007.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 60079-18 ®
Edition 3.0 2009-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “m”
Atmosphères explosives –
Partie 18: Protection du matériel par encapsulage «m»
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60079-18 ®
Edition 3.0 2009-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “m”
Atmosphères explosives –
Partie 18: Protection du matériel par encapsulage «m»
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
V
CODE PRIX
ICS 29.260.20 ISBN 978-2-88910-046-0
– 2 – 60079-18 © IEC:2009
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Terms and definitions .7
4 General .9
4.1 Level of protection (Equipment protection level (EPL)) .9
4.2 Additional requirements for level of protection “ma”.9
4.3 Rated voltage and prospective short circuit current .9
5 Requirements for compounds .9
5.1 General .9
5.2 Specification .9
5.3 Properties of the compound.10
5.3.1 Water absorption .10
5.3.2 Dielectric strength .10
6 Temperatures .10
6.1 General .10
6.2 Determination of the limiting temperature .10
6.2.1 Maximum surface temperature.10
6.2.2 Temperature of the compound .10
6.3 Temperature limitation.10
7 Constructional requirements .11
7.1 General .11
7.2 Determination of faults .11
7.2.1 Fault examination .11
7.2.2 Components considered as not subject to fail .12
7.2.3 Isolating components.12
7.2.4 Infallible separation distances.12
7.3 Free space in the encapsulation .13
7.3.1 Group III “m” equipment.13
7.3.2 Group I and Group II “m” equipment .14
7.4 Thickness of the compound .15
7.4.1 “m” equipment .15
7.4.2 Windings for electrical machines .17
7.4.3 Rigid, multi-layer printed wiring boards with through connections .17
7.5 Switching contacts .18
7.5.1 Level of protection “ma”.18
7.5.2 Level of protection “mb”.18
7.5.3 Level of protection “mc” .18
7.6 External connections .19
7.6.1 General .19
7.6.2 Additional requirements for “ma” equipment .19
7.7 Protection of bare live parts.19
7.8 Cells and batteries .19
7.8.1 General .19
7.8.2 Prevention of gassing .19
7.8.3 Protection against inadmissible temperatures and damage to the cells .20
60079-18 © IEC:2009 – 3 –
7.8.4 Reverse current.20
7.8.5 Current limitation .20
7.8.6 Protection against the polarity inversion and deep discharge of the
cells .20
7.8.7 Charging of cells or batteries.21
7.8.8 Requirements for control safety devices for cells or batteries .21
7.9 Protective devices .21
7.9.1 General .21
7.9.2 Electrical protective devices .22
7.9.3 Thermal protective devices .23
7.9.4 Built-in protective devices.23
8 Type tests .23
8.1 Tests on the compound .23
8.1.1 Water absorption test .23
8.1.2 Dielectric strength test.24
8.2 Tests on the apparatus.24
8.2.1 Test sequence.24
8.2.2 Maximum temperature .24
8.2.3 Thermal endurance test.24
8.2.4 Dielectric strength test.25
8.2.5 Cable pull test .25
8.2.6 Pressure test for Group I and Group II electrical equipment.26
8.2.7 Test for resettable thermal protective device .26
8.2.8 Sealing test for build-in protective devices.27
9 Routine verifications and tests.27
9.1 Visual inspections .27
9.2 Dielectric strength test.27
10 Marking .27
Annex A (informative) Basic requirements for compounds for “m” equipment .29
Annex B (normative) Allocation of test samples .30
Bibliography.31
Figure 1 – Dimensional key for thickness through the compound .16
Figure 2 – Minimum distances for multi-layer printed wiring boards.18
Figure 3 – Fitting of blocking diodes .20
Figure A.1 − Basic requirements for compounds for “m” equipment.
...
IEC 60079-18 ®
Edition 3.0 2009-05
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “m”
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 60079-18 ®
Edition 3.0 2009-05
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “m”
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.260.20 ISBN 978-2-8891-0046-0
IEC 60079-18 ®
Edition 3.0 2009-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “m”
Atmosphères explosives –
Partie 18: Protection du matériel par encapsulage «m»
– 2 – 60079-18 © IEC:2009
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Terms and definitions .7
4 General .9
4.1 Level of protection (Equipment protection level (EPL)) .9
4.2 Additional requirements for level of protection “ma”.9
4.3 Rated voltage and prospective short circuit current .9
5 Requirements for compounds .9
5.1 General .9
5.2 Specification .9
5.3 Properties of the compound.10
5.3.1 Water absorption .10
5.3.2 Dielectric strength .10
6 Temperatures .10
6.1 General .10
6.2 Determination of the limiting temperature .10
6.2.1 Maximum surface temperature.10
6.2.2 Temperature of the compound .10
6.3 Temperature limitation.10
7 Constructional requirements .11
7.1 General .11
7.2 Determination of faults .11
7.2.1 Fault examination .11
7.2.2 Components considered as not subject to fail .12
7.2.3 Isolating components.12
7.2.4 Infallible separation distances.12
7.3 Free space in the encapsulation .13
7.3.1 Group III “m” equipment.13
7.3.2 Group I and Group II “m” equipment .14
7.4 Thickness of the compound .15
7.4.1 “m” equipment .15
7.4.2 Windings for electrical machines .17
7.4.3 Rigid, multi-layer printed wiring boards with through connections .17
7.5 Switching contacts .18
7.5.1 Level of protection “ma”.18
7.5.2 Level of protection “mb”.18
7.5.3 Level of protection “mc” .18
7.6 External connections .19
7.6.1 General .19
7.6.2 Additional requirements for “ma” equipment .19
7.7 Protection of bare live parts.19
7.8 Cells and batteries .19
7.8.1 General .19
7.8.2 Prevention of gassing .19
7.8.3 Protection against inadmissible temperatures and damage to the cells .20
60079-18 © IEC:2009 – 3 –
7.8.4 Reverse current.20
7.8.5 Current limitation .20
7.8.6 Protection against the polarity inversion and deep discharge of the
cells .20
7.8.7 Charging of cells or batteries.21
7.8.8 Requirements for control safety devices for cells or batteries .21
7.9 Protective devices .21
7.9.1 General .21
7.9.2 Electrical protective devices .22
7.9.3 Thermal protective devices .23
7.9.4 Built-in protective devices.23
8 Type tests .23
8.1 Tests on the compound .23
8.1.1 Water absorption test .23
8.1.2 Dielectric strength test.24
8.2 Tests on the apparatus.24
8.2.1 Test sequence.24
8.2.2 Maximum temperature .24
8.2.3 Thermal endurance test.24
8.2.4 Dielectric strength test.25
8.2.5 Cable pull test .25
8.2.6 Pressure test for Group I and Group II electrical equipment.26
8.2.7 Test for resettable thermal protective device .26
8.2.8 Sealing test for build-in protective devices.27
9 Routine verifications and tests.27
9.1 Visual inspections .27
9.2 Dielectric strength test.27
10 Marking .27
Annex A (informative) Basic requirements for compounds for “m” equipment .29
Annex B (normative) Allocation of test samples .30
Bibliography.31
Figure 1 – Dimensional key for thickness through the compound .16
Figure 2 – Minimum distances for multi-layer printed wiring boards.18
Figure 3 – Fitting of blocking diodes .20
Figure A.1 − Basic requirements for compounds for “m” equipment.29
Table 1 – Distances through the compound .13
Table 2 – Minimum thickness of compound adjacent to free space for Group III “m”
equipment.13
Table 3 – Minimum thickness of compound adjacent to free space for Group I and
Group II “m” equipment.14
Table 4 – Thickness of the compound.16
Table 5 – Minimum distances for multi-layer printed wiring boards.17
Table 6 – Test pressure .26
Table B.1 − Allocation of test samples .30
– 4 – 60079-18 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
EXPLOSIVE ATMOSPHERES –
Part 18: Equipment protection by encapsulation “m”
FOREWORD
1) The International Electrotechnical Commission (I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.