EN 61800-2:2015

Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems

IEC 61800-2:2015 applies to adjustable speed electric a.c. power drive systems, which include semiconductor power conversion and the means for their control, protection, monitoring, measurement and the a.c. motors. It applies to adjustable speed electric power drive systems intended to feed a.c. motors from a BDM connected to line-to-line voltages up to and including 1 kV a.c. 50 Hz or 60 Hz and/or voltages up to and including 1,5 kV d.c. input side. NOTE 1 Adjustable speed electric a.c. power drive systems intended to feed a.c. motors, and with rated converter input voltages above 1 000 V a.c. are covered by IEC 61800-4. NOTE 2 Adjustable speed electric d.c. power drive systems intended to feed d.c. motors are covered by IEC 61800-1. NOTE 3 For adjustable speed electric a.c. power drive systems having series-connected electronic power converter sections, the line-to-line voltage is the sum of the series connected input voltages. Traction applications and electric vehicles are excluded from the scope of this standard. IEC 61800-2:2015 is intended to define the following aspects of an a.c. power drive system (PDS): - principal parts of the PDS; - ratings and performance; - specifications for the environment in which the PDS is intended to be installed and operated; - other specifications which might be applicable when specifying a complete PDS. This standard provides minimum requirements, which may be used for the development of a specification between customer and manufacturer. This edition includes the following significant technical changes with respect to the previous edition. a) Clause 1 (Scope) has been updated, b) Clause 2 (Normative references) has been updated, c) Clause 3 (Definitions) has been updated including fundamental definitions to be used across the IEC 61800 series of standards, d) Clause 4 has been updated with respect to: 1) description of the basic topology for BDM/CDM/PDS (4.2); 2) ratings and performance (4.3 and 4.4); 3) reference to applicable standards within the IEC 61800 series with respect to EMC (IEC 61800-3), Electrical safety (IEC 61800-5-1), Functional safety (IEC 61800-5-2), Load duty aspects (IEC TR 61800-6), Communication profiles (IEC 61800-7 series) and Power interface voltage (IEC TS 61800-8) to avoid conflicting requirements (4.5, 4.6, 4.7, 4.10, 4.11, 4.12); 4) update of requirement for ECO design (4.8); 5) update of requirement for environmental evaluation (4.9); 6) implementation of requirement for explosive atmosphere (4.13). e) Clause 5 has been updated with test requirement in order to provide a clear link between design requirement and test requirement. f) Clause 6 has been updated to harmonize the marking and documentation requirement within the IEC 61800 series. g) Existing Annexes A to G have been deleted and replaced with new Annexes A to C.

Drehzahlveränderbare elektrische Antriebe - Teil 2: Allgemeine Anforderungen - Festlegungen für die Bemessung von Niederspannungs-Wechselstrom-Antriebssystemen mit einstellbarer Frequenz

Entraînements électriques de puissance à vitesse variable - Partie 2: Exigences générales - Spécifications de dimensionnement pour systèmes d'entraînement de puissance à vitesse variable en courant alternatif et basse tension

L'IEC 61800-2:2015 s'applique aux systèmes d'entraînement électrique alternatifs à vitesse variable, incluant les convertisseurs à semi-conducteurs et les moyens permettant de les commander, de les protéger, de les surveiller, de les mesurer, ainsi que les moteurs à courant alternatif. Elle s'applique aux systèmes d'entraînement électrique à vitesse variable destinés à alimenter les moteurs à courant alternatif d'un BDM connecté aux tensions entre phases jusqu'à et y compris 1 kV en courant alternatif, 50 Hz ou 60 Hz et/ou des tensions jusqu'à et y compris 1,5 kV en courant continu côté entrée. NOTE 1 Les systèmes d'entraînement électrique alternatifs à vitesse variable destinés à alimenter les moteurs à courant alternatif, dont les tensions d'entrée assignées du convertisseur sont supérieures à 1 000 V en courant alternatif sont traités par l'IEC 61800-4. NOTE 2 Les systèmes d'entraînement électrique continus à vitesse variable destinés à alimenter les moteurs à courant continu sont traités par l'IEC 61800-1. NOTE 3 Pour les systèmes d'entraînement électrique alternatifs à vitesse variable comportant des sections de convertisseur de puissance électronique en série, la tension entre phases est égale à la somme des tensions d'entrée en série. Les applications de traction et les véhicules électriques sont exclus du domaine d'application de la présente norme. L'IEC 61800-2:2015 est destinée à définir les aspects suivants d'un entraînement électrique de puissance (PDS) à courant alternatif: - parties principales du PDS; - caractéristiques assignées et caractéristiques de fonctionnement; - spécifications de l'environnement d'installation et de fonctionnement prévu du PDS; - autres spécifications susceptibles d'être applicables lors de la spécification d'un PDS complet. La présente norme fournit les exigences minimales qui peuvent être utilisées pour le développement d'une spécification entre le client et le fabricant. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente. a) L'Article 1 (Domaine d'application) a été mis à jour, b) L'Article 2 (Références normatives) a été mis à jour, c) L'Article 3 (Définitions) a été mis à jour, y compris les définitions de base à utiliser dans la série IEC 61800, d) L'Article 4 a été mis à jour concernant la: 1) description de la topologie de base des BDM/CDM/PDS (4.2); 2) caractéristiques assignées et caractéristiques de fonctionnement (4.3 et 4.4); 3) référence aux normes applicables dans la série de normes IEC 61800 relatives à la CEM (IEC 61800-3), la sécurité électrique (IEC 61800-5-1), la sécurité fonctionnelle (IEC 61800-5-2), les aspects liés au régime de charge (IEC TR 61800-6), les profils de communication (série IEC 61800-7) et la tension d'interface de puissance (IEC TS 61800-8) afin d'éviter les exigences conflictuelles (4.5, 4.6, 4.7, 4.10, 4.11, 4.12); 4) mise à jour des exigences d'écoconception (4.8); 5) mise à jour des exigences d'évaluation environnementale (4.9); application des exigences des atmosphères explosives (4.13). e) L'Article 5 a été mis à jour avec les exigences d'essai afin d'associer clairement les exigences de conception et les exigences d'essai. f) L'Article 6 a été mis à jour afin d'harmoniser les exigences de marquage et de documentation dans

Električni pogonski sistemi z nastavljivo hitrostjo - 2. del: Splošne zahteve - Razvrstilne specifikacije za nizkonapetostne izmenične pogonske sisteme z nastavljivo hitrostjo

Ta del standarda IEC 61800 velja za izmenične električne pogonske sisteme z nastavljivo hitrostjo, ki vključujejo polprevodnike za pretvorbo toka, elemente za krmiljenje, zaščito, nadzor in merjenje ter motorje na izmenično napetost.
Velja za električne pogonske sisteme z nastavljivo hitrostjo, namenjene napajanju motorjev na izmenično napetost v osnovnem pogonskem modulu (BDM), ki so priključeni na medlinijske izmenične napetosti do in vključno z 1 kV 50 Hz ali 60 Hz in/ali enosmerne napetosti do in vključno z 1,5 kV na vhodni strani.
OPOMBA 1 Izmenični električni pogonski sistemi z nastavljivo hitrostjo, namenjeni napajanju motorjev na izmenično napetost in z izmenično nazivno vhodno napetostjo pretvornika nad 1000 V, so zajeti v standardu IEC 61800-4.
OPOMBA 2 Enosmerni električni pogonski sistemi z nastavljivo hitrostjo, namenjeni napajanju motorjev na enosmerno napetost, so zajeti v standardu IEC 61800-1.
OPOMBA 3 Za izmenične električne pogonske sisteme z nastavljivo hitrostjo, ki vsebujejo dele z zaporedno vezanimi pretvorniki električne energije, je medlinijska napetost vsota vhodnih napetosti v zaporedni vezavi.
Uporaba za namene vleke in električna vozila ne spadajo v področje uporabe tega standarda.
Namen tega dela standarda IEC 61800 je opredelitev naslednjih vidikov izmeničnih pogonskih
sistemov (PDS):
• glavni deli izmeničnih pogonskih sistemov;
• nazivna moč in zmogljivost;
• specifikacije za okolje, kjer bo izmenični pogonski sistem nameščen in
v katerem se ga bo upravljalo;
• druge specifikacije, ki se morda uporabljajo pri specifikaciji celotnega izmeničnega pogonskega sistema.
Ta standard podaja minimalne zahteve, ki se lahko uporabijo, ko stranka in proizvajalec oblikujeta specifikacije.
Skladnost s tem standardom se zagotovi samo, če stranka, ki oblikuje specifikacije, ali odbori za standarde za izdelke, ki oblikujejo standarde za izdelke, posebej navedejo vsako točko tega standarda.
Ta dokument zagotavlja kratek uvod in sklice na podrobne zahteve, ki so navedene v določenih standardih za izmenične pogonske sisteme v skupini standardov IEC 61800, za nekatere vidike, ki so zajeti v teh standardih.
To velja za naslednje vidike:
• elektromagnetna združljivost, ki je zajeta v standardu IEC 61800-3;
• električna varnost, ki je zajeta v standardu IEC 61800-5-1;
• funkcionalna varnost, ki je zajeta v standardu IEC 61800-5-2;
• vrste obremenitev, ki so zajete v standardu IEC TR 61800-6;
• komunikacijske profile, ki so zajeti v skupini standardov IEC 61800-7;
• specifikacije o napetosti na vmesniku, ki so zajete v standardu IEC TS 61800-8.

General Information

• Status: Withdrawn
• Publication Date: 24-Sep-2015
• Withdrawal Date: 25-Aug-2018
• ICS: 29.160.30 - Motors
• ICS: 29.200 - Rectifiers. Convertors. Stabilized power supply
• Technical Committee: CLC/TC 22X - Power electronics
• Drafting Committee: IEC/SC 22G - IEC_SC_22G
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 07-Apr-2024
• Completion Date: 07-Apr-2024
• Ref Project: SIST EN 61800-2:2015 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems

Relations

• Replaces: EN 61800-2:1998 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 61800-2:2021 - Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for adjustable speed AC power drive systems
• Effective Date: 13-Apr-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2015
1DGRPHãþD
SIST EN 61800-2:2001
(OHNWULþQLSRJRQVNLVLVWHPL]QDVWDYOMLYRKLWURVWMRGHO6SORãQH]DKWHYH
5D]YUVWLOQHVSHFLILNDFLMH]DQL]NRQDSHWRVWQHL]PHQLþQHSRJRQVNHVLVWHPH]
QDVWDYOMLYRKLWURVWMR
Adjustable speed electrical power drive systems - Part 2: General requirements - Rating
specifications for low voltage adjustable speed a.c. power drive systems
Ta slovenski standard je istoveten z: EN 61800-2:2015
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61800-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2015
ICS 29.160.30; 29.200 Supersedes EN 61800-2:1998
English Version
Adjustable speed electrical power drive systems -
Part 2: General requirements - Rating specifications for low
voltage adjustable speed a.c. power drive systems
(IEC 61800-2:2015)
Entraînements électriques de puissance à vitesse variable - Drehzahlveränderbare elektrische Antriebe -
Partie 2: Exigences générales - Spécifications de Teil 2: Allgemeine Anforderungen - Festlegungen für die
dimensionnement pour systèmes d'entraînement de Bemessung von Niederspannungs-Wechselstrom-
puissance à vitesse variable en courant alternatif et basse Antriebssystemen mit einstellbarer Frequenz
tension (IEC 61800-2:2015)
(IEC 61800-2:2015)
This European Standard was approved by CENELEC on 2015-08-26. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61800-2:2015 E
European foreword
The text of document 22G/303/FDIS, future edition 2 of IEC 61800-2, prepared by SC 22G “Adjustable
speed electric drive systems incorporating semiconductor power converters” of IEC/TC 22 “Power
electronic systems and equipment” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61800-2:2015.
The following dates are fixed:
• latest date by which the document has to be (dop) 2016-05-26
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-08-26
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61800-2:1998.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61800-2:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60027-3 NOTE Harmonized as EN 60027-3.
IEC 60034-1 NOTE Harmonized as EN 60034-1.
IEC 60204-1 NOTE Harmonized as EN 60204-1.
IEC 60364 Series NOTE Harmonized as HD 60364 Series.
IEC 61131-2 NOTE Harmonized as EN 61131-2.
IEC 61158 Series NOTE Harmonized as EN 61158 Series.
IEC 61158-1 NOTE Harmonized as EN 61158-1.
IEC 61158-2 NOTE Harmonized as EN 61158-2.
IEC 61378-1 NOTE Harmonized as EN 61378-1.
IEC 61439-1 NOTE Harmonized as EN 61439-1.
IEC 61800-1 NOTE Harmonized as EN 61800-1.
IEC 61800-4 NOTE Harmonized as EN 61800-4.

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year

IEC 60034-9 -  Rotating electrical machines - EN 60034-9 -
Part 9: Noise limits
IEC 60038 -  IEC standard voltages EN 60038 -
IEC 60050 Series International Electrotechnical Vocabulary - -
IEC 60068 series Environmental testing EN 60068 Series
IEC 60068-2-2 2007 Environmental testing - EN 60068-2-2 2007
Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6 2007 Environmental testing - EN 60068-2-6 2008
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60068-2-27 2008 Environmental testing - EN 60068-2-27 2009
Part 2-27: Tests - Test Ea and guidance:
Shock
IEC 60068-2-52 1996 Environmental testing - EN 60068-2-52 1996
Part 2-52: Tests - Test Kb: Salt mist, cyclic
(sodium chloride solution)
IEC 60068-2-68 1994 Environmental testing - EN 60068-2-68 1996
Part 2-68: Tests - Test L: Dust and sand
IEC 60068-2-78 2012 Environmental testing - EN 60068-2-78 2013
Part 2-78: Tests - Test Cab: Damp heat,
steady state
IEC 60079 Series Explosive atmospheres EN 60079 Series
IEC 60146-1-1 -  Semiconductor converters - General EN 60146-1-1 -
requirements and line commutated
converters -
Part 1-1: Specification of basic
requirements
IEC/TR 60146-1-2 -  Semiconductor converters - General - -
requirements and line commutated
converters -
Part 1-2: Application guide
IEC 60529 -  Degrees of protection provided by EN 60529 -
enclosures (IP Code)
Publication Year Title EN/HD Year

IEC 60664-1 -  Insulation coordination for equipment EN 60664-1 -
within low-voltage systems -
Part 1: Principles, requirements and tests
IEC 60721-3-1 1997 Classification of environmental conditions - EN 60721-3-1 1997
- Part 3: Classification of groups of
environmental parameters and their
severities -
Section 1: Storage
IEC 60721-3-2 1997 Classification of environmental conditions - EN 60721-3-2 1997
- Part 3: Classification of groups of
environmental parameters and their
severities -- Section 2: Transportation
IEC 60721-3-3 1994 Classification of environmental conditions - EN 60721-3-3 1995
+A1 - Part 3: Classification of groups of
+A2 environmental parameters and their +A2 1997
severities -
Section 3: Stationary use at
weatherprotected locations
IEC 60721-3-4 1995 Classification of environmental conditions - EN 60721-3-4 1995
+A1 - Part 3: Classification of groups of +A1 1997
environmental parameters and their
severities -
Section 4: Stationary use at non-
weatherprotected locations
IEC 61800-3 -  Adjustable speed electrical power drive EN 61800-3 -
systems -
Part 3: EMC requirements
and specific test methods
IEC 61800-5-1 2007 Adjustable speed electrical power drive EN 61800-5-1 2007
systems -
Part 5-1: Safety requirements - Electrical,
thermal and energy
IEC 61800-5-2 2007 Adjustable speed electrical power drive EN 61800-5-2 2007
systems -
Part 5-2: Safety requirements - Functional
IEC/TR 61800-6 -  Adjustable speed electrical power drive CLC/TR 61800-6 -
systems -
Part 6: Guide for determination of types of
load duty and corresponding current
ratings
IEC 61800-7 Series Adjustable speed electrical power drive EN 61800-7 Series
systems -
Part 7: Generic interface and use of
profiles for power drive systems
IEC 61800-7-1 -  Adjustable speed electrical power drive EN 61800-7-1 -
systems -
Part 7-1: Generic interface and use of
profiles for power drive systems - Interface
definition
IEC 61800-2 ®
Edition 2.0 2015-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Adjustable speed electrical power drive systems –

Part 2: General requirements – Rating specifications for low voltage adjustable

speed a.c. power drive systems

Entraînements électriques de puissance à vitesse variable –

Partie 2: Exigences générales – Spécifications de dimensionnement pour

systèmes d'entraînement de puissance à vitesse variable en courant alternatif et

basse tension
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.160.30; 29.200 ISBN 978-2-8322-2754-1

– 2 – IEC 61800-2:2015 © IEC 2015
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 10
2 Normative references . 11
3 Terms and definitions . 12
4 Ratings and specifications for the act of installing, commissioning and operation . 28
4.1 General . 28
4.2 BDM/CDM/PDS characteristics and topology . 29
4.2.1 General . 29
4.2.2 BDM/CDM/PDS characteristics . 29
4.2.3 Basic topology for BDM/CDM/PDS’s . 30
4.3 Ratings . 33
4.3.1 General . 33
4.3.2 Input ratings . 34
4.3.3 Output ratings . 35
4.3.4 Operating quadrants . 37
4.3.5 Ratings and properties of the control equipment . 37
4.3.6 Special ratings related to BDM/CDM/PDS or motor . 37
4.4 Performance . 38
4.4.1 Operational . 38
4.4.2 Fault supervision . 47
4.4.3 Minimum status indication required . 47
4.4.4 I/O devices . 47
4.5 Electrical safety . 49
4.6 Functional safety . 49
4.7 EMC . 50
4.8 Eco design . 50
4.8.1 General . 50
4.8.2 Energy efficiency and losses . 50
4.8.3 Environmental impact . 50
4.9 Environmental condition for service, transport and storage . 51
4.9.1 General . 51
4.9.2 Operation . 51
4.9.3 Storage and transport of equipment . 56
4.9.4 Environmental service tests (type test) .
...