IEC 61010-2-010:2014

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials

IEC 61010-2-010:2014 specifies safety requirements for electrically powered laboratory equipment for the heating of materials, where the heating of materials is one of the functions of the equipment. This third edition cancels and replaces the second edition published in 2003. It constitutes a technical revision and includes the following significant changes from the second edition, as well as numerous other changes:
- added a definition for HEAT TRANSFER MEDIUM to Clause 3;
- added a symbol for FLAMMABLE LIQUID to Table 1 in Clause 5;
- added a requirement for instructions pertaining to ventilation in Clause 5;
- modified the requirements for humidity preconditioning in Clause 6;
- added requirements for equipment containing or using flammable liquids to Clause 9;
- added requirements for over-temperature protection devices to Clause 10.
It has the status of a horizontal standard in accordance with IEC Guide 104.
This publication is to be read in conjunction with IEC 61010-1:2010.

Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-010: Exigences particulières pour appareils de laboratoire utilisés pour l'échauffement des matières

L'IEC 61010-2-010:2014 spécifie les exigences de sécurité relatives aux appareils de laboratoire alimentés électriquement pour l'échauffement des matières, où l'échauffement des matières est l'une des fonctions de l'appareil. Cette troisième édition annule et remplace la deuxième édition publiée en 2003. Elle constitue une révision technique et inclut les modifications majeures suivantes par rapport à la deuxième édition, ainsi que de nombreuses autres modifications:
- ajout d'une définition pour MOYEN DE TRANSFERT DE CHALEUR à l'Article 3;
- ajout d'un symbole pour LIQUIDE INFLAMMABLE au Tableau 1 de l'Article 5;
- ajout d'une exigence relative aux instructions concernant la ventilation à l'Article 5;
- modification des exigences relatives au préconditionnement à l'humidité dans l'Article 6;
- ajout d'exigences relatives aux appareils contenant ou utilisant des liquides inflammables à l'Article 9;
- ajout d'exigences relatives aux dispositifs de protection contre les surtempératures à l'Article 10.
Elle a le statut de norme horizontale conformément au IEC Guide 104.
Cette publication doit être lue conjointement avec l' IEC 61010-1:2010.

General Information

• Status: Published
• Publication Date: 24-Sep-2014
• ICS: 19.080 - Electrical and electronic testing
• ICS: 71.040.20 - Laboratory ware and related apparatus
• Technical Committee: TC 66 - Safety of measuring, control and laboratory equipment
• Drafting Committee: MT 10 - TC 66/MT 10
• Current Stage: DELPUB - Deleted Publication
• Start Date: 31-Jan-2018
• Completion Date: 12-Feb-2019

Relations

• Revises: IEC 61010-2-010:2003 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• Effective Date: 05-Sep-2023
• Revised: IEC 61010-2-010:2019 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61010-2-010 ®
Edition 3.0 2014-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
GROUP SAFETY PUBLICATION
PUBLICATION GROUPÉE DE SÉCURITÉ
Safety requirements for electrical equipment for measurement, control and
laboratory use –
Part 2-010: Particular requirements for laboratory equipment for the heating of
materials
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire –
Partie 2-010: Exigences particulières pour appareils de laboratoire utilisés pour
l’échauffement des matières
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
14 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 55 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 61010-2-010 ®
Edition 3.0 2014-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
GROUP SAFETY PUBLICATION
PUBLICATION GROUPÉE DE SÉCURITÉ

Safety requirements for electrical equipment for measurement, control and

laboratory use –
Part 2-010: Particular requirements for laboratory equipment for the heating of

materials
Règles de sécurité pour appareils électriques de mesurage, de régulation et de

laboratoire –
Partie 2-010: Exigences particulières pour appareils de laboratoire utilisés pour

l’échauffement des matières
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 19.080, 71.040.20 ISBN 978-2-8322-1867-9

– 2 – IEC 61010-2-010:2014 © IEC 2014

CONTENTS
FOREWORD . 3

1 Scope and object . 6

2 Normative references . 6

3 Terms and definitions . 6

4 Tests . 7

5 Marking and documentation . 7

6 Protection against electric shock . 10
7 Protection against mechanical HAZARDS . 12
8 Resistance to mechanical stresses . 12
9 Protection against the spread of fire . 13
10 Equipment temperature limits and resistance to heat . 13
11 Protection against HAZARDS from fluids . 15
12 Protection against radiation, including laser sources, and against sonic and
ultrasonic pressure . 15
13 Protection against liberated gases and substances, explosion and implosion . 15
14 Components and subassemblies . 16
15 Protection by interlocks . 17
16 HAZARDS resulting from application . 17
17 RISK Assessment . 17
Annexes . 17
Bibliography . 18

Table 1 – Symbols . 7
Table 101 – Time-temperature conditions . 15

INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT

FOR MEASUREMENT, CONTROL AND LABORATORY USE –

Part 2-010: Particular requirements for laboratory equipment

for the heating of materials
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61010-2-010 has been prepared by IEC technical committee 66:
Safety of measuring, control and laboratory equipment.
It has the status of a group safety publication in accordance with IEC Guide 104.
This third edition cancels and replaces the second edition published in 2003. It constitutes a
technical revision and includes the following significant changes from the second edition, as
well as numerous other changes:
• added a definition for HEAT TRANSFER MEDIUM to Clause 3;
• added a symbol for FLAMMABLE LIQUID to Table 1 in Clause 5;
• added a requirement for instructions pertaining to ventilation in Clause 5;
• modified the requirements for humidity preconditioning in Clause 6;

– 4 – IEC 61010-2-010:2014 © IEC 2014

• added requirements for equipment containing or using flammable liquids to Clause 9;

• added requirements for over-temperature protection devices to Clause 10.

The text of this standard is based on the follow
...