iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60904-1:2006

(Main)

Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics

Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics

Describes procedures for the measurement of current-voltage characteristics of photovoltaic devices in natural or simulated sunlight. Lays down basic requirements for the measurement, defines procedures for different measuring techniques in use and shows practices for minimising measurement uncertainty.

Dispositifs photovoltaïques - Partie 1: Mesure des caractéristiques courant-tension des dispositifs photovoltaïques

Décrit les procédures pour la mesure des caractéristiques courant-tension des dispositifs photovoltaïques sous éclairement solaire naturel ou simulé. Présente des exigences fondamentales pour la mesure, définit des procédures pour les différentes techniques de mesure utilisées et présente des pratiques visant à réduire l'incertitude de mesure.

General Information

Status
Published
Publication Date
12-Sep-2006
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
27.160 - Solar energy engineering
Technical Committee
TC 82 - Solar photovoltaic energy systems
Drafting Committee
WG 2 - TC 82/WG 2
Current Stage
DELPUB - Deleted Publication
Completion Date
25-Sep-2020
Ref Project

Relations

Revised
IEC 60904-1:2020 - Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
Effective Date
05-Sep-2023

Buy Standard

IEC 60904-1:2006 - Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristicsIEC 60904-1:2006 - Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
PreviousNext
Standard
IEC 60904-1:2006 - Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
English and French language
23 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NORME CEI
INTERNATIONALE
IEC



60904-1
INTERNATIONAL


Deuxième édition
STANDARD

Second edition
2006-09

Dispositifs photovoltaïques –
Partie 1:
Mesure des caractéristiques courant-tension
des dispositifs photovoltaïques

Photovoltaic devices –
Part 1:
Measurement of photovoltaic
current-voltage characteristics
Numéro de référence
Reference number
CEI/IEC 60904-1:2006

---------------------- Page: 1 ----------------------
Numérotation des publications Publication numbering
Depuis le 1er janvier 1997, les publications de la CEI As from 1 January 1997 all IEC publications are
sont numérotées à partir de 60000. Ainsi, la CEI 34-1 issued with a designation in the 60000 series. For
devient la CEI 60034-1. example, IEC 34-1 is now referred to as IEC 60034-1.
Editions consolidées Consolidated editions
Les versions consolidées de certaines publications de la The IEC is now publishing consolidated versions of its
CEI incorporant les amendements sont disponibles. Par publications. For example, edition numbers 1.0, 1.1
exemple, les numéros d’édition 1.0, 1.1 et 1.2 indiquent and 1.2 refer, respectively, to the base publication,
respectivement la publication de base, la publication de the base publication incorporating amendment 1 and
base incorporant l’amendement 1, et la publication de the base publication incorporating amendments 1
base incorporant les amendements 1 et 2. and 2.
Informations supplémentaires Further information on IEC publications
sur les publications de la CEI
Le contenu technique des publications de la CEI est The technical content of IEC publications is kept
constamment revu par la CEI afin qu'il reflète l'état under constant review by the IEC, thus ensuring that
actuel de la technique. Des renseignements relatifs à the content reflects current technology. Information
cette publication, y compris sa validité, sont dispo- relating to this publication, including its validity, is
nibles dans le Catalogue des publications de la CEI available in the IEC Catalogue of publications
(voir ci-dessous) en plus des nouvelles éditions, (see below) in addition to new editions, amendments
amendements et corrigenda. Des informations sur les and corrigenda. Information on the subjects under
sujets à l’étude et l’avancement des travaux entrepris consideration and work in progress undertaken by the
par le comité d’études qui a élaboré cette publication, technical committee which has prepared this
ainsi que la liste des publications parues, sont publication, as well as the list of publications issued,
également disponibles par l’intermédiaire de: is also available from the following:
• Site web de la CEI (www.iec.ch) • IEC Web Site (www.iec.ch)
• Catalogue des publications de la CEI • Catalogue of IEC publications
Le catalogue en ligne sur le site web de la CEI The on-line catalogue on the IEC web site
(www.iec.ch/searchpub) vous permet de faire des (www.iec.ch/searchpub) enables you to search by a
recherches en utilisant de nombreux critères, variety of criteria including text searches,
comprenant des recherches textuelles, par comité technical committees and date of publication. On-
d’études ou date de publication. Des informations en line information is also available on recently
ligne sont également disponibles sur les nouvelles issued publications, withdrawn and replaced
publications, les publications remplacées ou retirées, publications, as well as corrigenda.
ainsi que sur les corrigenda.
• IEC Just Published • IEC Just Published
Ce résumé des dernières publications parues This summary of recently issued publications
(www.iec.ch/online_news/justpub) est aussi dispo- (www.iec.ch/online_news/justpub) is also available
nible par courrier électronique. Veuillez prendre by email. Please contact the Customer Service
contact avec le Service client (voir ci-dessous) Centre (see below) for further information.
pour plus d’informations.
• Service clients • Customer Service Centre
Si vous avez des questions au sujet de cette If you have any questions regarding this
publication ou avez besoin de renseignements publication or need further assistance, please
supplémentaires, prenez contact avec le Service contact the Customer Service Centre:
clients:
Email: custserv@iec.ch Email: custserv@iec.ch
Tél: +41 22 919 02 11 Tel: +41 22 919 02 11
Fax: +41 22 919 03 00 Fax: +41 22 919 03 00
.

---------------------- Page: 2 ----------------------
NORME CEI
INTERNATIONALE
IEC



60904-1
INTERNATIONAL


Deuxième édition
STANDARD

Second edition

2006-09


Dispositifs photovoltaïques –
Partie 1:
Mesure des caractéristiques courant-tension
des dispositifs photovoltaïques

Photovoltaic devices –
Part 1:
Measurement of photovoltaic
current-voltage characteristics
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this pub
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 63092-1:2020(Main)
Photovoltaics in buildings - Part 1: Requirements for building-integrated photovoltaic modules

IEC 63092-1:2020 specifies BIPV (building-integrated photovoltaic) module requirements and applies to photovoltaic modules used as building products. It focuses on the properties of these photovoltaic modules relevant to basic building requirements and the applicable electro-technical requirements. This document addresses requirements on the BIPV modules in the specific ways they are intended to be mounted but not the mounting structure itself, which is within the scope of IEC 63092-2. This document is based on EN 50583-1.

  • Standard
    29 pages
    English language
    sale 15% off
IEC
IEC 63092-2:2020(Main)
Photovoltaics in buildings - Part 2: Requirements for building-integrated photovoltaic systems

IEC 63092-2:2020 specifies BIPV system requirements and applies to photovoltaic systems that are integrated into buildings with the photovoltaic modules used as building products. It focuses on the properties of these photovoltaic systems relevant to basic building requirements and the applicable electrotechnical requirements.
This document addresses requirements on the BIPV systems in the specific ways they are intended to be mounted and the mounting structure, but not the BIPV module itself, which is within the scope of IEC 63092-1.

  • Standard
    22 pages
    English language
    sale 15% off
IEC
IEC 60904-1:2020(Main)
Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics

IEC 60904-1:2020 describes procedures for the measurement of current-voltage characteristics (I-V curves) of photovoltaic (PV) devices in natural or simulated sunlight. These procedures are applicable to a single PV solar cell, a sub-assembly of PV solar cells, or a PV module. This document is applicable to non-concentrating PV devices for use in terrestrial environments, with reference to (usually but not exclusively) the global reference spectral irradiance AM1.5 defined in IEC 60904-3.
This third edition cancels and replaces the second edition published in 2006. The main changes with respect to the previous edition are as follows:
- Updated scope to include all conditions.
- Added terms and definitions.
- Reorganised document to avoid unnecessary duplication.
- Added data analysis clause.
- Added informative annexes (area measurement, PV devices with capacitance, dark I-V curves and effect of spatial non-uniformity of irradiance).

  • Standard
    67 pages
    English and French language
    sale 15% off
IEC
IEC 60904-9:2020(Main)
Photovoltaic devices - Part 9: Classification of solar simulator characteristics

IEC 60904-9:2020 is applicable for solar simulators used in PV test and calibration laboratories and in manufacturing lines of solar cells and PV modules. This document define classifications of solar simulators for use in indoor measurements of terrestrial photovoltaic devices. Solar simulators are classified as A+, A, B or C based on criteria of spectral distribution match, irradiance non-uniformity in the test plane and temporal instability of irradiance. This document provides the required methodologies for determining the classification of solar simulators in each of the categories. A solar simulator which does not meet the minimum requirements of class C cannot be classified according to this document. This document is used in combination with IEC TR 60904-14, which deals with best practice recommendations for production line measurements of single-junction PV module maximum power output and reporting at standard test conditions.
This third edition cancels and replaces the second edition issued in 2007. This edition includes the following significant technical changes with respect to the previous edition:
- Changed title;
- Added spectral match classification in an extended wavelength range;
- Introduction of new A+ class;
- Definition of additional parameters for spectral irradiance evaluation;
- Added apparatus sections for spectral irradiance measurement and spatial uniformity measurement;
- Revised procedure for spectral match classification (minimum 4 measurement locations);
- Revised measurement procedure for spatial uniformity of irradiance;
- Added informative Annex for sensitivity analysis of spectral mismatch error related to solar simulator spectral irradiance.

  • Standard
    59 pages
    English and French language
    sale 15% off
IEC
IEC 60904-10:2020(Main)
Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements

IEC 60904-10:2020 describes the procedures used to measure the dependence of any electrical parameter (Y) of a photovoltaic (PV) device with respect to a test parameter (X) and to determine the degree at which this dependence is close to an ideal linear (straight-line) function. It also gives guidance on how to consider deviations from the ideal linear dependence and in general on how to deal with non-linearities of PV device electrical parameters.
This third edition cancels and replaces the second edition published in 2009. This edition includes the following significant technical changes with respect to the previous edition:
a. Modification of title.
b. Inclusion of an Introduction explanatory of the changes and the reasoning behind them.
c. Inclusion of a new Clause Terms and Definitions (Clause 3), with distinction between generic linear dependence and linear dependence of short-circuit current versus irradiance (linearity).
d. Explicit definition of equivalent sample (Clause 4).
e. Technical revision of the apparatus (Clause 5), of the measurement procedures (Clause 6 to Clause 8) and of the data analysis (Clause 9), with separation of the data analysis for a generic linear dependence from the data analysis specific to linearity (i.e. short-circuit current dependence on irradiance) assessment. Additionally, inclusion of impact of spectral effects on both linearity and linear dependence assessment.
f. Introduction of specific data analysis for two-lamp method, making it fully quantitative. Addition of extended version called N-lamp method.
g. Modification of the linearity assessment criterion with inclusion of a formula that can be used to correct the irradiance reading of a PV reference device for non-linearity of its short-circuit current versus irradiance. A linearity factor is specifically newly defined for this purpose.
h. Revision of the requirements for the report (Clause 10) in order to improve clearness about what information is always necessary and what is dependent on the procedure actually followed to measure the linear dependence, including the type of dependence measured (generic or linearity).

  • Standard
    56 pages
    English and French language
    sale 15% off
IEC
IEC TR 63279:2020(Main)
Derisking photovoltaic modules - Sequential and combined accelerated stress testing

IEC TR 63279:2020 reviews research into sequential and combined accelerated stress tests that have been devised to determine the potential for degradation modes in PV modules that occur in the field that single-factor and steady-state tests do not show. This document is intended to provide data and theory-based motivation and help visualize the next steps for improved accelerated stress tests that will derisk PV module materials and designs. Any incremental savings as a result of increased reliability and reduced risk translates into lower levelized cost of electricity for PV. Lower costs will result in faster adoption of PV and the associated benefits of renewable energy.

  • Technical report
    53 pages
    English language
    sale 15% off
IEC
IEC TS 62910:2020(Main)
Utility-interconnected photovoltaic inverters - Test procedure for under voltage ride-through measurements

IEC TS 62910:2020 is available as IEC TS 62910:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TS 62910:2020 provides a test procedure for evaluating the performance of Under Voltage Ride-Through (UVRT) functions in inverters used in utility-interconnected Photovoltaic (PV) systems. This document is most applicable to large systems where PV inverters are connected to utility high voltage (HV) distribution systems. However, the applicable procedures may also be used for low voltage (LV) installations in locations where evolving UVRT requirements include such installations, e.g. single-phase or 3-phase systems. The assessed UVRT performance is valid only for the specific configuration and operational mode of the inverter under test. Separate assessment is required for the inverter in other factory or user-settable configurations, as these may cause the inverter UVRT response to behave differently. This second edition cancels and replaces the first edition issued in 2015 and constitutes a technical revision.

  • Technical specification
    29 pages
    English language
    sale 15% off
IEC
IEC 62790:2020(Main)
Junction boxes for photovoltaic modules - Safety requirements and tests

IEC 62790:2020 is available as IEC 62790:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62790:2020 describes safety requirements, constructional requirements and tests for junction boxes up to 1 500 V DC for use on photovoltaic modules in accordance with class II of IEC 61140:2016.
This document applies also to enclosures mounted on PV-modules containing electronic circuits for converting, controlling, monitoring or similar operations. Additional requirements concerning the relevant operations are applied under consideration of the environmental conditions of the PV-modules. This document does not apply to the electronic circuits of these devices, for which other IEC standards apply. This second edition cancels and replaces the first edition published in 2014. This edition includes the following significant technical changes with respect to the previous edition:
- Modifications in normative references and terms and definitions;
- Improvement of declaration of categories for junction boxes in 4.1;
- Clarification for ambient temperature in 4.1;
- Addition of requirement to provide information concerning RTE/RTI or TI in 4.2;
- Reference to IEC 62930 instead of EN 50618 in 4.6;
- Addition of "Functional insulation" in Table 1;
- Addition of "Distance through cemented joints" in Table 3;
- Correction of procedure of process to categorize material groups (deletion of PTI) in 4.15.2.3;
- Requirement for approval of RTE/RTI or TI for insulation parts in 4.16.1 and 4.16.2;
- Change of requirements concerning electrochemical potential in 4.17.2;
- Clarification for IP-test in 5.3.4.2;
- Addition of test voltage for cemented joints in 5.3.6 and 5.3.16;
- Addition of detailled description on how to prepare the test sample for the thermal cycle test in 5.3.9.1;
- New test procedure for bypass diode thermal test (5.3.18) in accordance with MQT 18.1 of IEC 61215-2:2016;
- New test procedure for reverse overload current test in 5.3.23;
- New Figure 1 for thermal cycle test.

  • Standard
    109 pages
    English and French language
    sale 15% off
IEC
IEC 62891:2020(Main)
Maximum power point tracking efficiency of grid connected photovoltaic inverters

IEC 62891:2020 provides a procedure for the measurement of the efficiency of the maximum power point tracking (MPPT) of inverters used in grid-connected photovoltaic (PV) systems. Both the static and dynamic MPPT efficiency are considered. Based on the static MPPT efficiency calculated in this document and steady state conversion efficiency determined in IEC 61683 the overall efficiency can be calculated. The dynamic MPPT efficiency is indicated separately.

  • Standard
    34 pages
    English language
    sale 15% off
IEC
IEC 62109-3:2020(Main)
Safety of power converters for use in photovoltaic power systems - Part 3: Particular requirements for electronic devices in combination with photovoltaic elements

IEC 62109-3:2020 covers the particular safety requirements for electronic elements that are mechanically and/or electrically incorporated with photovoltaic (PV) modules or systems.
Mechanically and/or electrically incorporated means that the whole combination of electronic device with the photovoltaic element is sold as one product. Nevertheless, tests provided in this document may also be used to evaluate compatibility of PV modules and electronic devices that are sold separately and are intended to be installed close to each other.
The purpose of the requirements of this document is to provide additional safety-related testing requirements for the following types of integrated electronics, collectively referred to as module integrated equipment (MIE):
a) Type A MIE where the PV element can be evaluated as a PV module according to IEC 61730-1 and IEC 61730‑2 independently from the electronic element;
b) Type B MIE where the PV element cannot be evaluated as a PV module according to IEC 61730-1 and IEC 61730-2 independently from the electronic element.
The contents of the corrigendum of November 2020 have been included in this copy.

  • Standard
    60 pages
    English and French language
    sale 15% off