IEC TR 62839-1:2014
(Main)Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules
Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules
IEC TR 62839-1:2014(E) specifies the PSR (product specific rules) for wires and cables used for communication, data, control and command. This PSR covers the use, installation and end-of-life stages and provides methodological precisions to PEP/PCR writing for "wires and cables and accessories products used for communication, data, control and command. PSR and general rules all together form the product category rules. Three categories of wires and cables are covered:
- communication and data wires and cables, which may have metal or optical fiber conductors;
- control and command wires and cables, which can have metal or fiber optical conductors;
- accessories.
This document only deals with the "wires and cables" products. "Accessories products are for further study. This document is primarily intended for:
- environment and/or product managers;
- LCA (life cycle assessment) experts in companies, in charge of PEP/PCR development;
- verifiers in charge of PEP/PCR conformity assessment in accordance with the defined rules.
General Information
Standards Content (Sample)
IEC TR 62839-1 ®
Edition 1.0 2014-11
TECHNICAL
REPORT
colour
inside
Environmental declaration –
Part 1: Wires, cables and accessory products – Specific rules
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC TR 62839-1 ®
Edition 1.0 2014-11
TECHNICAL
REPORT
colour
inside
Environmental declaration –
Part 1: Wires, cables and accessory products – Specific rules
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
P
ICS 13.020.01; 33.120.10; 33.120.20 ISBN 978-2-8322-1921-8
– 2 – IEC TR 62839-1:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Communication and data wires and cables . 7
4.1 Functional unit and reference flow description. 7
4.2 System boundaries . 8
4.2.1 Overview . 8
4.2.2 Installation phase . 8
4.2.3 Use phase . 8
4.2.4 Lifetime and use rates . 12
4.2.5 End of life phase . 12
5 Control and command wires and cables . 13
5.1 Functional unit and reference flow description. 13
5.2 System boundaries . 13
5.2.1 Overview . 13
5.2.2 Installation phase . 13
5.2.3 Use phase . 14
5.2.4 End of life phase . 14
6 Accessories FFS . 14
Annex A (informative) Applications . 15
Table 1 – Twisted pair cables . 10
Table 2 – Optical cables . 12
Table A.1 – Table of applications . 15
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENVIRONMENTAL DECLARATION –
Part 1: Wires, cables and accessory products –
Specific rules
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 62839-1, which is a technical report, has been prepared by IEC technical committee
46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components
and accessories.
– 4 – IEC TR 62839-1:2014 © IEC 2014
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
46/496/DTR 46/528/RVC
Full information on the voting for the approval of this technical report can be found in the
report on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62839 series, published under the general title Environmental
declaration, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
s document using a
understanding of its contents. Users should therefore print thi
colour printer.
ENVIRONMENTAL DECLARATION –
Part 1: Wires, cables and accessory products –
Specific rules
1 Scope
This part of IEC 62839 specifies the PSR (product specific rules) for wires and cables used
for communication, data, control and command. This PSR covers the use, installation and
end-of-life stages and provides methodological precisions to PEP/PCR writing for “wires and
cables and accessories” products used for communication, data, control and command. PSR
and general rules all together form the product category rules.
ISO 14025:2006 establishes the principles and specifies the procedures for developing Type
III environmental declaration programmes and Type III environmental declarations. It
specifically establishes the use of the ISO 14040 series of standards in the development of
Type III environmental declaration programmes and Type III environmental declarations. It
establishes principles for the use of environmental information, in addition to those given in
ISO 14020:2000.
Type III environmental declarations as described in ISO 14025:2006 are primarily intended for
use in business-to-business communication, but their use in business-to-consumer
communication under certain conditions is not precluded. These environmental declarations,
referred here after as PEP, follow a specific set of rules and requirements specified in product
category rules declaration that are referred here after as “PEP/PCR”.
Three categories of wires and cables are covered:
– communication and data wires and cables, which may have metal or optical fiber
conductors;
– control and command wires and cables , which can have metal or fiber optical conductors;
– accessories.
This document only deals with the “wires and cables“ products. “Accessories products” are for
further study.
This document is primarily intended for:
– environment and/or product managers;
– LCA (life cycle assessment) experts in companies, in charge of PEP/PCR development;
– verifiers in charge of PEP/PCR conformity assessment in accordance with the defined
rules.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60793 (all parts), Optical fibres
– 6 – IEC TR 62839-1:2014 © IEC 2014
IEC 60793-2-10, Optical fibres – Part 2-10: Product specifications – Sectional specification for
category A1 multimode fibres
IEC 60794 (all parts), Optical fibre cables
IEC 61156 (all parts), Multicore and symmetrical pair/quad cables for digital communications
IEC 61156-5, Multicore and symmetrical pair/quad cables for digital communications – Part 5:
Symmetrical pair/quad cable
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.