IEC 62368-1:2018/COR1:2020
(Corrigendum)Corrigendum 1 - Audio/video, information and communication technology equipment - Part 1: Safety requirements
Corrigendum 1 - Audio/video, information and communication technology equipment - Part 1: Safety requirements
Corrigendum 1 - Équipements des technologies de l'audio/vidéo, de l'information et de la communication - Partie 1: Exigences de sécurité
General Information
Relations
Standards Content (Sample)
IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 62368-1 IEC 62368-1
Edition 3.0 2018-10 Édition 3.0 2018-10
Audio/video, information and communication Équipements des technologies de l'audio/vidéo,
technology equipment – de l'information et de la
communication –
Part 1: Safety requirements
Partie 1: Exigences de sécurité
...
This May Also Interest You
IEC 62368-1:2023 is available as IEC 62368-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62368-1:2023 is a product safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards. The prescribed safeguards are intended to reduce the likelihood of pain, injury and, in the case of fire, property damage. The objective of the introduction is to help designers to understand the underlying principles of safety in order to design safe equipment. These principles are informative and not an alternative to the detailed requirements of this document.
- Standard1224 pagesEnglish languagesale 15% off
- Standard823 pagesEnglish and French languagesale 15% off
IEC TR 62368-2:2019 is available as IEC TR 62368-2:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 62368-2:2019 provides explanatory information related to IEC 62368-1. Only those subclauses considered to need further background reference information or explanation of their content to benefit the reader are included. Therefore, not all numbered subclauses are cited. Unless otherwise noted, all references are to clauses, subclauses, annexes, figures or tables located in IEC 62368-1:2018. This third edition updates the second edition of IEC 62368-2 published in 2014 to take into account changes made to IEC 62368-1:2014 as identified in the Foreword of IEC 62368-1:2018. This Technical Report is informative only. In case of a conflict between IEC 62368-1 and IEC TR 62368-2, the requirements in IEC 62368-1 prevail over this Technical Report.
Key words: Audio/Video, Safeguards, Information, Communication
- Technical report603 pagesEnglish languagesale 15% off
- Technical report405 pagesEnglish and French languagesale 15% off
IEC 62368-1:2018 is applicable to the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V. This document does not include requirements for performance or functional characteristics of equipment.
This is a product safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards.
The prescribed safeguards are intended to reduce the likelihood of pain, injury and, in the case of fire, property damage.
This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– addition of requirements for outdoor equipment;
– new requirements for optical radiation;
– addition of requirements for insulating liquids;
– addition of requirements for work cells;
– addition of requirements for wireless power transmitters;
– addition of requirements for fully insulated winding wire (FIW);
– alternative method for determination of top, bottom and side openings for fire enclosures;
– alternative requirements for sound pressure.
This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
The contents of the corrigendum of April 2020 have been included in this copy.
Key words: Audio, Video, Communication, Safety
- Standard1175 pagesEnglish languagesale 15% off
- Standard775 pagesEnglish and French languagesale 15% off
IEC 62368-3:2017 applies to equipment intended to supply and receive operating power through communication cables or ports. It covers particular requirements for circuits that are designed to transfer DC power from a power sourcing equipment (PSE) to a powered device (PD).
The power transfer uses voltages at ES1 or ES2 or in very specific cases voltage levels at ES3.
Any cable provided with a connector defined by an industry standard that permits DC power transfer between equipment is considered a communication cable even if communication does not take place. For example, a USB cable can be used just to recharge a portable device battery.
This International Standard is to be used in conjunction with IEC 62368-1:2014.
It has the status of a group safety publication in accordance with IEC Guide 104.
The subclauses of IEC 62368-1 apply as far as reasonable. Where safety aspects are similar to those of IEC 62368-1, the relevant clause or subclause of IEC 62368-1 is given for reference in a note in the relevant subclause. Where a requirement in IEC 62368-3 refers to a requirement or criterion of IEC 62368-1, a specific reference to IEC 62368-1 is made.
This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
- Standard51 pagesEnglish and French languagesale 15% off
IEC 62911:2016 defines routine electrical safety test procedures for use during or after manufacturing of complete equipment, sub-assemblies or components, complying with IEC 60065, IEC 60950-1 or IEC 62368-1 and powered by an a.c. mains supply or d.c. mains supply, to detect manufacturing failures and unacceptable tolerances in manufacturing and materials. All the tests defined in this standard do not necessarily have to be performed at the end product manufacturing location. The optimal location for the routine electrical safety tests can be defined by the equipment manufacturer and reviewed under the conformity assessment scheme. Key words: Audio, Video Electrical Safety Test
- Standard20 pagesEnglish and French languagesale 15% off
- Standard10 pagesEnglish and French languagesale 15% off
Specifies the minimum operational and performance requirements and methods of testing for transmitters and receivers capable of voice communication, digital selective calling and narrow band direct printing telegraphy for the GMDSS operating in either the medium frequency band only or in medium and high frequency bands.
- Standard10 pagesEnglish and French languagesale 15% off
IEC/TR 62368-2:2015(E) provides explanatory information related to IEC 62368-1. Only those subclauses considered to need further background reference information or explanation of their content to benefit the reader are included. Therefore, not all numbered subclauses are cited. Unless otherwise noted, all references are to clauses, subclauses, annexes, figures or tables located in IEC 62368-1:2014. This second edition cancels and replaces the first edition published in 2011. It constitutes a technical revision. This second edition updates the first edition of IEC 62368-2 published in 2011 to take into account changes made to IEC 62368-1:2010 as identified in the Forword of IEC 62368-1:2014. This Technical Report is informative only. In case of a conflict between IEC 62368-1 and IEC TR 62368-2, the requirements in IEC 62368-1 prevail over this Technical Report. Key words: Audio/Video, Safeguards, Information, Communication
- Technical report149 pagesEnglish languagesale 15% off
IEC 62368-1:2014 deals with the safety of electrical and electronic equipment within the field of audio, video, information and communication technology, and business and office machines with a rated voltage not exceeding 600 V. This standard does not include requirements for performance or functional characteristics of equipment. Examples of equipment within the scope of this standard are given in Annex A. A rated voltage of 600 V is considered to include equipment rated at 400/690 V. This part of IEC 62368 is also applicable to: components and subassemblies intended for incorporation in this equipment. Such components and subassemblies need not comply with every requirement of the standard, provided that the complete equipment, incorporating such components and subassemblies, does comply; external power supply units intended to supply other equipment within the scope of this part of IEC 62368 and accessories intended to be used with equipment within the scope of this part of IEC 62368. This part of IEC 62368 does not apply to power supply systems which are not an integral part of the equipment, such as motor-generator sets, battery backup systems and distribution transformers. This part of IEC 62328 specifies safeguards for ordinary persons, instructed persons, and skilled persons. Additional requirements may apply for equipment that is clearly designed or intended for use by children or specifically attractive to children. This second edition cancels and replaces the first edition published in 2010. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of requirements for LEDs;
- new requirements for wall and ceiling mounting means;
- addition of acoustic shock requirements for personal music players;
- revision of the battery requirements, including new requirements for coin/button cell batteries and revision of the burn requirements. Key words: Audio/Video, Safeguards, Information, Communication The contents of the corrigenda of February 2015 and November 2015 have been included in this copy.
- Standard676 pagesEnglish and French languagesale 15% off
IEC/TR 62368-2:2011(E) provides explanatory information related to IEC 62368-1. Only those subclauses considered to need further background reference information or explanation of their content to benefit the reader are included. Therefore, not all numbered subclauses are cited. Unless otherwise noted, all references are to clauses, subclauses, annexes, figures or tables located in IEC 62368-1:2010.
- Technical report105 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.