ISO/IEC 10859:1997
(Main)Information technology- 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers-First edition 1997-06
Information technology- 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers-First edition 1997-06
General Information
Standards Content (Sample)
INTERNATIONAL
ISO/IEC
STANDARD
10859
First edition
1997-06
Information technology –
8-bit backplane interface: STEbus and mechanical
core specifications for microcomputers
Technologies de l'information –
Interface de fond de panier 8 bits – Bus STE
Reference number
ISO/IEC 10859: 1997(E)
---------------------- Page: 1 ----------------------
INTERNATIONAL
ISO/IEC
STANDARD
10859
First edition
1997-06
Information technology –
8-bit backplane interface: STEbus and mechanical
core specifications for microcomputers
Technologies de l'information –
Interface de fond de panier 8 bits – Bus STE
ISO/IEC 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
ISO/IEC Copyright Office • Case postale 56 • CH-1211 Genève 20 • Switzerland
---------------------- Page: 2 ----------------------
– 2 – 10859 © ISO/IEC:1997
CONTENTS
Page
FOREWORD . 3
IEEE STANDARD FOR A 8-BIT BACKPLANE INTERFACE: STEBUS
INTRODUCTION . 4
Clause
1 General . 5
2 Functional description. 9
3 Signal lines. 10
4 Arbitration. 16
5 Data transfer protocol . 18
6 Inter-board signalling . 32
7 Electrical specifications . 36
Appendices
A Applicable IEC specifications . 42
B Recommended bus termination arrangement . 43
MECHANICAL CORE SPECIFICATIONS FOR MICROCOMPUTERS
Page
INTRODUCTION . 45
Clause
1 Scope. 46
2 Object . 46
3 References. 46
4 General arrangement. 47
5 Euroboard matrix . 49
6 Euroboard sizes. 50
7 Position of plug-in unit mounted connectors (Board types and box type) . 55
8 Plug-in unit description . 58
9 Plug-in unit dimensions. 58
10 Backplane design and mounting positions . 59
11 Subracks . 83
12 Environmental specifications. 93
---------------------- Page: 3 ----------------------
10859 © ISO/IEC:1997 – 3 –
Information technology –
8-bit backplane interface:
STEbus and mechanical core specifications
for microprocessors
FOREWORD
ISO (the International Organization for Standardization) and IEC (the International
Electrotechnical Commission) form the specialized system for worldwide standardization.
National bodies that are members of ISO or IEC participate in the development of International
Standards through technical committee established by the respective organization to deal with
particular fields of technical activity. ISO and IEC technical committees collaborate in fields of
mutual interest. Other international organizations, governmental and non-governmental, in
liaison with ISO a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.