ISO/IEC 29182-6:2014
(Main)Information technology -- Sensor networks: Sensor Network Reference Architecture (SNRA) -- Part 6: Applications
Information technology -- Sensor networks: Sensor Network Reference Architecture (SNRA) -- Part 6: Applications
ISO/IEC 29182-6:2014, describes and provides - a compilation of sensor network applications for which International Standardized Profiles (ISPs) are needed, - guidelines for the structured description of sensor network applications, and - examples for structured sensor network applications. It does not cover ISPs for which drafting rules are described in ISO/IEC TR 10000. Due to the generic character of ISO/IEC 29182, fully developed ISPs will not be included in this International Standard.
General Information
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 29182-6
First edition
2014-08-01
Information technology — Sensor
networks: Sensor Network Reference
Architecture (SNRA) —
Part 6:
Applications
Technologies de l’information — Réseaux de capteurs: Architecture de
référence pour réseaux de capteurs —
Partie 6: Applications
Reference number
©
ISO/IEC 2014
© ISO/IEC 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2014 – All rights reserved
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 2
5 An overview of sensor network applications . 2
6 Guidelines for the description of sensor network applications . 4
6.1 Introduction . 4
6.2 General information . 4
6.3 Architecture . 4
7 Example: Management of mobile assets in hospitals . 5
7.1 Introduction . 5
7.2 General information . 5
7.3 Architecture . 7
8 Example: Container monitoring in the global supply chain .10
8.1 Introduction .10
8.2 General information .11
8.3 Architecture .13
Bibliography .17
© ISO/IEC 2014 – All rights reserved iii
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Details of any patent rights identified during the development of the document will be in the Introduction
and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/IEC JTC 1, Information technology.
ISO/IEC 29182 consists of the following parts, under the general title Information technology — Sensor
networks: Sensor Network Reference Architecture (SNRA):
— Part 1: General overview and requirements
— Part 2: Vocabulary and terminology
— Part 3: Reference architecture views
— Part 4: Entity models
— Part 5: Interface definitions
— Part 6: Applications
— Part 7: Interoperability guidelines
iv © ISO/IEC 2014 – All rights reserved
Introduction
A wide range of applications has been proposed for sensor networks. In practice however, sensor networks
have been built and deployed for a relatively small number of applications. This is partly due to the lack
of a business case for certain applications and partly due to technical challenges in building a non-trivial
sensor network of reasonable complexity. The main reason for this impediment is that multidisciplinary
expertise, such as sensors, communications and networking, signal processing, electronics, computing,
and cyber security is required to design a sensor network. Presently, the design process is so complex
that one can leverage little from one sensor network design to another. It appears as if one has to start
from almost scratch every time one wishes to design and deploy a sensor network. Yet, upon closer
inspection, there are many commonalities in instantiations of sensor networks that realize various
applications. These commonalities include similarities in the choice of network architecture, and the
entities/functional blocks that are used in the architecture.
The purpose of the ISO/IEC 29182 series is to
— provide guidance to facilitate the design and development of sensor networks,
— improve interoperability of sensor networks, and
— make sensor networks plug-and-play, so that it becomes fairly easy to add/remove sensor nodes
to/from an existing sensor network.
The ISO/IEC 29182 series can be used by sensor network designers, software developers, and service
providers to meet customer requirements, including any applicable interoperability requirements.
The ISO/IEC 29182 series comprises seven parts. Brief descriptions of these parts are given next.
ISO/IEC 29182-1 provides a general overview and the requirements for the sensor network reference
architecture.
ISO/IEC 29182-2 provides definitions for the terminology and vocabulary used in the reference
architecture.
ISO/IEC 29182-3 presents the reference architecture from various viewpoints, such as business,
operational, system, technical, functional, and logical views.
ISO/IEC 29182-4 categorizes the entities comprising the reference architecture into two classes of
physical and functional entities and presents models for the entities. ISO/IEC 29182-5 provides detailed
information on the interfaces among various entities in the reference architecture.
This part of ISO/IEC 29182 provides detailed information on the development of International
Standardized Profiles.
ISO/IEC 29182-7 provides design principles for the reference architecture that take the interoperability
requirements into account.
There are no requirements for compliance in ISO/IEC 29182-1 to ISO/IEC 29182-7. Users should ensure
that the sensor nodes and the related sensor network are compliant with the application or deployment
governing body.
© ISO/IEC 2014 – All rights reserved v
INTERNATIONAL STANDARD ISO/IEC 29182-6:2014(E)
Information technology — Sensor networks: Sensor
Network Reference Architecture (SNRA) —
Part 6:
Applications
1 Scope
This part of the ISO/IEC 29182 series, describes and provides
— a compilation of sensor network applications for which International Standardized Profiles (ISPs)
are needed,
— guidelines for the structured description of sensor network applications, and
— examples for structured sensor network applications.
This part of ISO/IEC 29182 does not cover ISPs for which drafting rules are described in ISO/IEC TR 10000.
Due to the generic character of ISO/IEC 29182 fully developed ISPs will not be included in this
International Standard.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 29182-1, Information technology — Sensor networks: Sensor Network Reference Architecture
(SNRA) — Part 1: General overview and requirements
ISO/IEC 29182-2, Information technology — Sensor networks: Sensor Network Reference Architecture
(SNRA) — Part 2: Vocabulary and terminology
ISO/IEC 29182-3, Information technology — Sensor networks: Sensor Network Reference Architecture
(SNRA) — Part 3: Reference architecture views
ISO/IEC 29182-4, Information technology — Sensor networks: Sensor Network Reference Architecture
(SNRA) — Part 4: Entity models
ISO/IEC 29182-5, Information technology — Sensor networks: Sensor Network Reference Architecture
(SNRA) — Part 5: Interface definitions
ISO/IEC 29182-7, Information technology — Sensor networks: Sensor Network Reference Architecture
(SNRA) — Part 7: Interoperability guidelines
ISO/IEC TR 10000-1, Information technology — Framework and taxonomy of International Standardized
Profiles — Part 1: General principles and documentation framework
ISO/IEC TR 10000-2, Information technology — Framework and taxonomy of International Standardized
Profiles — Part 2: Principles and Taxonomy for OSI Profiles
ISO/IEC TR 10000-3, Information technology — Framework and taxonomy of International Standardized
Profiles — Part 3: Principles and Taxonomy for Open System Environment Profiles
© ISO/IEC 2014 – All rights reserved 1
3 Terms and definitions
For the purpose of this document, the terms and definitions given in ISO/IEC 29182-2 apply.
4 Symbols and abbreviated terms
ISP International Standardized Profile
5 An overview of sensor network applications
Sensor network market segments and applications are vast and diverse covering both horizontal
and vertical markets. The sensor network potential market segments and their current and future
applications that employ wired/wireless sensor networks are listed in the following table.
Table 1 — Examples of sensor network market segments and applications
Market segments Sensor network applications
Logistics and supply — Cold chain monitoring
chain management
— Monitoring of hazardous goods and chemicals
— Theft prevention in distribution systems for high value goods
— Container monitoring in global supply chains
— Monitoring of electronically sealed freight containers
— Decentralized control of material flow systems
Energy & utility distri- — Smart grid systems
bution industry
— Automated meter reading
Automation, monitor- — Automation of manufacturing processes
ing, and control of
— Quality control of production processes
industrial production
processes — Machine condition monitoring
— Inventory tracking and surveillance
— Personnel tracking at production sites
— Control of manufacturing robots
Health care and — Monitoring of vital physiological parameters
medical applications at
— Position and posture monitoring
home and in hospitals
— Hospital personnel and patient tracking
Care for elderly and/or — Monitoring of activity patterns for early detection and prevention of hazardous
disabled people conditions
— F
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.