iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60519-4:2006/COR1:2008

(Corrigendum)

Corrigendum 1 - Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations

Corrigendum 1 - Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations

Corrigendum 1 - Sécurité dans les installations électrothermiques - Partie 4: Exigences particulières pour les installations de fours à arc

General Information

Status
Published
Publication Date
11-Dec-2008
ICS
25.180.10 - Electric furnaces
Technical Committee
TC 27 - Industrial electroheating and electromagnetic processing
Drafting Committee
MT 21 - TC 27/MT 21
Current Stage
DELPUB - Deleted Publication
Completion Date
19-Jun-2013
Ref Project

Relations

Corrects
IEC 60519-4:2006 - Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations
Effective Date
05-Sep-2023
Revised
IEC 60519-4:2013 - Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations
Effective Date
05-Sep-2023

Buy Standard

IEC 60519-4:2006/COR1:2008 - Corrigendum 1 - Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations Released:12/12/2008IEC 60519-4:2006/COR1:2008 - Corrigendum 1 - Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations Released:12/12/2008
PreviousNext
Standard
IEC 60519-4:2006/COR1:2008 - Corrigendum 1 - Safety in electroheat installations - Part 4: Particular requirements for arc furnace installations Released:12/12/2008
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


CEI 60519-4 IEC 60519-4
(Troisième édition – 2006) (Third edition – 2006)
Sécurité dans les installations Safety in electroheat installations –
électrothermiques – Part 4: Particular requirements for arc
Partie 4: Exigences particulières pour les furnace installations
installations de fours à arc
CORRIGENDUM 1
Supprimer Delete
4.2.2 Addition: 4.2.2 Addition:
Les fours à arc direct doivent être classés Direct arc furnaces shall be classified under
sous le domaine de tension 2, même si leur voltage band 2, even if their rated voltage
tension assignée dépasse 1 000 V en courant exceeds 1 000 V a.c. (1 500 V d.c.) but does
alternatif (1 500 V en courant continu) mais not exceed 1 500 V a.c. (2 100 V d.c.).
ne dépasse pas 1 500 V en courant alternatif
(2 100 V en courant continu).
Cela est soumis aux conditions préalables
This is under the precondition that
suivantes:
a) the electrical power installations with a
a) les installations d’alimentation en énergie
rated voltag
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC/IEEE 62395-2:2024(Main)
Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance

IEC/IEEE 62395-2:2024 provides detailed recommendations for the system design, installation, maintenance and repair of electrical resistance trace heating systems in industrial and commercial applications. This document does not include or provide for any applications in potentially explosive atmospheres.
This standard cancels and replaces IEC 62395-2:2013. This edition constitutes a technical revision.
This standard includes the following significant technical changes with respect to IEC 62395-2:2013:
a) Design considerations for trace heating on sprinkler systems have been expanded and a figure has been added to illustrate how to avoid undue shadowing of spray patterns from insulated sprigs close to sprinkler heads;
b) Specific details of design considerations for trace heating for emergency eyewash units and safety showers have been added.
This document is published as an IEC/IEEE Dual Logo standard.

  • Standard
    88 pages
    English language
    sale 15% off
IEC
IEC/IEEE 62395-1:2024(Main)
Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements

IEC/IEEE 62395-1:2024 specifies requirements for electrical resistance trace heating systems and includes general test requirements.
This first edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes, apart from general revisions of IEC 62395-1 and harmonization with IEEE 515 [1] and IEEE 515.1 [2], with respect to the previous edition:
a) Added control and monitoring requirements for fire sprinkler systems and safety showers.
b) Provided a supplemental ice bath method for verification of rated output.
c) Provided constructional and type test requirements for glands used to terminate heating devices to an exposed enclosure.

  • Standard
    64 pages
    English language
    sale 15% off
IEC
IEC 60676:2024(Main)
Industrial electroheating equipment - Test methods for direct arc furnaces

IEC 60676:2024 This document specifies the basic test procedures, conditions and methods for establishing the main performance parameters and the main operational characteristics of furnaces for direct arc heating, forming arcs between the electrode and metal, such as electric arc furnaces using alternating current (EAF AC) or direct current (EAF DC), and ladle furnaces (LF), with rated power level above 500 kVA .
This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The structure has been redrafted according to IEC 60398:2015.
b) The scope has been redrafted.
c) The terms/definitions, normative references and bibliography have been updated and completed.
d) The test methods and content from IEC 60398:2015 have been confirmed, replaced, or complemented with regards to direct arc furnaces (EAF, LF).
e) The annexes from IEC 60398:2015 have been confirmed, replaced, or complemented with regards to direct arc furnaces (EAF, LF).

  • Standard
    77 pages
    English and French language
    sale 15% off
IEC
IEC 60519-6:2022(Main)
Safety in installations for electroheating and electromagnetic processing - Part 6: Particular requirements for high frequency dielectric and microwave heating and processing equipment

IEC 60519-6:2022 is applicable to equipment using high frequency or microwave energy alone or in combination with other kinds of energy for industrial heating and processing of materials. It is also applicable to HF and MW generators made available to users as separate units.
This fourth edition cancels and replaces the third edition published in 2011.
This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:  
the structure has been redrafted according to the IEC 60519-1:2020;
the scope and object have been redrafted;
the terms/definitions, normative references and bibliography have been updated and completed;
all requirements and content from IEC 60519-6:2011 which are included in IEC 60519-1:2020 were removed to avoid any duplication;
inclusion of high frequency equipment which was previously covered by IEC 60519-9:2005 (withdrawn). This edition constitutes an extension to high frequency equipment.

  • Standard
    138 pages
    English and French language
    sale 15% off
IEC
IEC 60519-4:2021(Main)
Safety in installations for electroheating and electromagnetic processing - Part 4: Particular requirements for arc furnace installations

IEC 60519-4:2021 provides particular safety requirements for arc furnace installations. This document deals with the significant hazards, hazardous situations or hazardous events relevant to industrial arc furnace installations, as listed in Annex A, for normal operation and for single fault condition as well as under conditions of reasonably foreseeable misuse.
This fifth edition cancels and replaces the fourth edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:  
the structure has been redrafted according to IEC 60519-1:2020;
the scope and object have been redrafted;
the terms and definitions, normative references and bibliography have been updated and completed;
the requirements have been redrafted according to IEC 60519-1:2020;
all provisions have been redrafted and the text is more concise with respect to submerged arc furnace installations;
the annexes have been restructured, with respect to details concerning high voltage designs and non-electrical issues, however to be aware of in those installations;
the aspect of noise has been removed from the scope;
the EMC requirements have been clarified;
risk classification of hazards have been based on emission;
the boundaries to ISO 13577 (all parts) and ISO 13578 have been clarified.

  • Standard
    110 pages
    English and French language
    sale 15% off
IEC
IEC 60779:2020(Main)
Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces

IEC 60779:2020 specifies the test procedures, conditions and methods for determining the main performance parameters and operational characteristics of electroslag remelting furnaces.
Measurements and tests that are solely used for the verification of safety requirements of the installations are outside the scope of this document and are covered by IEC 60519-1 and IEC 60519-8.
This third edition cancels and replaces the second edition published in 2005. It constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
- the structure has been redrafted according to IEC 60398:2015;
- the scope and object have been redrafted;
- the terms/definitions, normative references and bibliography have been updated and completed;
- all test methods and content from IEC 60779:2005 that have been included in IEC 60398:2015 have been removed to avoid any duplication.

  • Standard
    46 pages
    English and French language
    sale 15% off
IEC
IEC 60519-8:2020(Main)
Safety in installations for electroheating and electromagnetic processing - Part 8: Particular requirements for electroslag remelting furnaces

IEC 60519-8:2020 specifies particular safety requirements for electroslag remelting equipment and installations.
This document specifies safety requirements applicable to mainly electroheating installations for remelting and, in some cases, for refining processes of metals through direct resistance heating of a conductive slag.
The object of this document is to specify the particular requirements for the safety of persons in or around an electroslag remelting furnace. The general requirements are included in IEC 60519-1.
This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the structure has been redrafted according to IEC 60519-1:2020;
b) the Scope has been redrafted;
c) the terms and definitions, normative references and bibliography have been updated and completed;
d) all requirements and content from IEC 60519-8:2005 that have been included in IEC 60519‑1:2020 have been removed to avoid any duplication.

  • Standard
    50 pages
    English and French language
    sale 15% off
IEC
IEC 60519-1:2020(Main)
Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements

IEC 60519-1:2020 is available as IEC 60519-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60519-1:2020 specifies the general safety requirements for industrial installations or equipment intended for electroheating (EH) and electroheating based treatment technologies as well as for electromagnetic processing of materials (EPM). This document deals with the significant hazards, hazardous situations or hazardous events relevant to industrial EH and EPM equipment, as listed in Annex A, for normal operation and for single fault condition as well as under conditions of reasonably foreseeable misuse. This sixth edition cancels and replaces the fifth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- removal of noise from the scope;
- clarification of EMC requirements;
- risk classification of hazards based on emission for all processing frequencies;
- clarification of boundaries between IEC 60519 (all parts) and ISO 13577 (all parts).

  • Standard
    343 pages
    English language
    sale 15% off
  • Standard
    208 pages
    English and French language
    sale 15% off
IEC
IEC 63078:2019(Main)
Installations for electroheating and electromagnetic processing - Test methods for induction through-heating installations

IEC 63078:2019 specifies the test procedures, conditions and methods for determining the main performance parameters and operational characteristics of induction through-heating installations.
Measurements and tests that are solely used for the verification of safety requirements of the installations are outside the scope of this document and are covered by IEC 60519-1 and IEC 60519-3.

  • Standard
    71 pages
    English and French language
    sale 15% off
IEC
IEC TS 62996:2017(Main)
Industrial electroheating and electromagnetic processing equipment - Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz

IEC TS 62996:2017(E) addresses the safety assessments in the frequency range between 1 kHz and 6 MHz and provides limits for touch and touch currents for industrial installations or equipment for electroheating (EH) and electromagnetic processing of materials (EPM). Indirect contact by capacitive currents to parts of an earthed human body in an open space are also included, since the current is then distributed analogously in the part of the body and differs from cases of induced electric shock.

  • Technical specification
    42 pages
    English language
    sale 15% off