IEC 60300-3-15:2009

Dependability management - Part 3-15: Application guide - Engineering of system dependability

IEC 60300-3-15:2009 provides guidance for an engineering system's dependability and describes a process for realization of system dependability through the system life cycle. This standard is applicable to new system development and for enhancement of existing systems involving interactions of system functions consisting of hardware, software and human elements.

Gestion de la sûreté de fonctionnement - Partie 3-15: Guide d'application - Ingénierie de la sûreté de fonctionnement des systèmes

La CEI 60300-3-15:2009 donnent des lignes directrices pour l'ingénierie de la sûreté de fonctionnement des systèmes et elle décrit un processus de réalisation de la sûreté de fonctionnement tout au long du cycle de vie des systèmes. Cette norme s'applique au développement de nouveaux systèmes et à l'amélioration de systèmes existants impliquant des interactions de fonctions système et consistant en des éléments matériels, logiciels et humains.

General Information

• Status: Published
• Publication Date: 29-Jun-2009
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 03.120.01 - Quality in general
• Technical Committee: TC 56 - Dependability
• Current Stage: PPUB - Publication issued
• Start Date: 15-Jul-2009
• Completion Date: 30-Jun-2009

Relations

• Replaces: IEC 61713:2000 - Software dependability through the software life-cycle processes- Application guide
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60300-3-15 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dependability management –
Part 3-15: Application guide – Engineering of system dependability

Gestion de la sûreté de fonctionnement –
Partie 3-15: Guide d’application – Ingénierie de la sûreté de fonctionnement des
systèmes
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 60300-3-15 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Dependability management –
Part 3-15: Application guide – Engineering of system dependability

Gestion de la sûreté de fonctionnement –
Partie 3-15: Guide d’application – Ingénierie de la sûreté de fonctionnement des
systèmes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XA
CODE PRIX
ICS 03.120.01 ISBN 978-2-88910-099-6
– 2 – 60300-3-15 © IEC:2009
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Terms and definitions .7
4 System dependability engineering and applications .8
4.1 Overview of system dependability engineering .8
4.2 System dependability attributes and performance characteristics .9
5 Managing system dependability.10
5.1 Dependability management .10
5.2 System dependability projects .10
5.3 Tailoring to meet project needs .11
5.4 Dependability assurance .11
6 Realization of system dependability.11
6.1 Process for engineering dependability into systems.11
6.1.1 Purpose of dependability process .11
6.1.2 System life cycle and processes .11
6.1.3 Process applications through the system life cycle .12
6.2 Achievement of system dependability.14
6.2.1 Purpose of system dependability achievements .14
6.2.2 Criteria for system dependability achievements .14
6.2.3 Methodology for system dependability achievements.15
6.2.4 Realization of system functions .16
6.2.5 Approaches to determine achievement of system dependability.17
6.2.6 Objective evidence of achievements.18
6.3 Assessment of system dependability .18
6.3.1 Purpose of system dependability assessments .18
6.3.2 Types of assessments .18
6.3.3 Methodology for system dependability assessments .20
6.3.4 Assessment value and implications .21
6.4 Measurement of system dependability.21
6.4.1 Purpose of system dependability measurements .21
6.4.2 Classification of system dependability measurements.22
6.4.3 Sources of measurements .23
6.4.4 Enabling systems for dependability measurements .23
6.4.5 Interpretation of dependability measurements.24
Annex A (informative) System life cycle processes and applications .25
Annex B (informative) Methods and tools for system dependability development and
assurance.35
Annex C (informative) Guidance on system application environment.42
Annex D (informative) Checklists for System Dependability Engineering .47
Bibliography.54

Figure 1 – An overview of a system life cycle.12
Figure 2 – An example of a process model .13

60300-3-15 © IEC:2009 – 3 –
Figure A.1 – An overview of system life cycle processes.25
Figure C.1 – Environmental requirements definition process .43
Figure C.2 – Mapping system application environments to exposures .44

– 4 – 60300-3-15 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DEPENDABILITY MANAGEMENT –
Part 3-15: Application guide –
Engineering of system dependability

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication should be clearly indicated
in the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability should attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC should not be held responsible for identifying any or all such patent rights.
International Standard IEC 60300-3-15 has been prepared by IEC technical committee 56:
Dependability.
The text of this standard is based on the following documents:
FDIS Report on voting
56/1315/FDIS 56/1321/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

60300-3-15 © IEC:2009 – 5 –
A list of all parts of the IEC 60300 series, under the general title Dependability management,
can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result
...