IEC PAS 62344:2007
(Main)General guidelines for the design of ground electrodes for high-voltage direct current (HVDC) links
General guidelines for the design of ground electrodes for high-voltage direct current (HVDC) links
Provides a guide for the design of electrode stations for HVDC links intended for ground return. This design guide was prepared by the CIGRÉ Working Group 14.21: HVDC Ground Electrode Design during the period 1995-1998.
General Information
Relations
Standards Content (Sample)
PUBLICLY
IEC
AVAILABLE
PAS 62344
SPECIFICATION
First edition
Pre-Standard
2007-05
General guidelines for the design
of ground electrodes for high-voltage
direct current (HVDC) links
Reference number
IEC/PAS 62344:2007(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
PUBLICLY
IEC
AVAILABLE
PAS 62344
SPECIFICATION
First edition
Pre-Standard
2007-05
General guidelines for the design
of ground electrodes for high-voltage
direct current (HVDC) links
PRICE CODE
Commission Electrotechnique Internationale X
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
– 2 – PAS 62344 © IEC:2007(E)
CONTENTS
FOREWORD .4
INTRODUCTION .5
1 Scope. 6
2 Basic concepts .6
2.1 Monopolar system .6
2.2 Bipolar system .7
2.3 Mixed or combined systems .8
3 Electric field as the decisive factor for selection of site.9
3.1 Why is the electric field the decisive factor? .9
3.2 Data necessary to determine the field.9
3.2.1 Reference currents (or electrode rating).9
3.2.2 Resistivity data .9
3.3 Considerations on site selection .9
3.4 Calculation of field.10
3.5 Apparent resistivity.11
4 Impact of the field on buried metallic objects .11
4.1 Impact on non-insulated buried metallic objects .11
4.2 Impact on insulated metallic objects .12
4.3 Impact on an a.c. grid .12
4.4 Reduction of impact due to polarization .14
4.4.1 Polarization on non-insulated metallic objects .14
4.4.2 Polarization on insulated metallic objects .16
4.4.3 Reduction of star-point currents due to polarization .16
5 Compass errors.17
6 Types of electrode stations .17
7 Design aspects for land electrodes .18
7.1 General .18
7.2 Heating of soil .19
7.3 Moisture content of soil/electric osmosis .20
7.4 Material for land electrodes.20
7.4.1 Inner conductor .20
7.4.2 Coke or graphite powder filling .21
7.5 Geometric layout of the electrode .22
7.5.1 Horizontal arrangements.22
7.5.2 Vertical arrangements.24
7.6 Step voltage.24
7.7 Touch voltage .25
8 Design aspects for sea electrodes .25
8.1 General .25
8.2 Sea electrodes using titanium as active part (anodic operation).26
8.2.1 Material.26
8.2.2 Current density and gradients.26
8.2.3 Geometric layout .26
8.3 Sea electrodes using coke or SiFeCr-rods as active parts (reversible operation) .27
8.3.1 Overheating risk .27
8.3.2 Material for sea electrodes .27
PAS 62344 © IEC:2007(E) – 3 –
8.3.3 Geometric layout of reversible sea electrodes .28
8.4 Sea electrodes using bare copper conductors as active parts (cathodic
operation only) .28
9 Design aspects for shore electrodes .30
9.1 General .30
9.2 Beach electrode stations.30
9.3 Pond electrode stations .32
10 Chemical aspects .34
11 Connection converter station – Electrode station .35
11.1 Separation of a.c. grid from electrode station .35
11.2 Constructional principles of electrode connection .36
11.3 Detection of faults on electrode connections .36
11.4 Electrode connection terminations.37
12 Operating experience – Reliability, availability, maintainability.37
13 Commissioning.38
14 List of references.39
Appendix 1 .41
Appendix 2 .42
Appendix 3 .43
Appendix 4 .44
Appendix 5 .47
– 4 – PAS 62344 © IEC:2007(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
GENERAL GUIDELINES FOR THE DESIGN OF GROUND ELECTRODES
FOR HIGH-VOLTAGE DIRECT CURRENT (HVDC) LINKS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
A PAS is a technical specification not fulfilling the requirements for a standard but made available
to the public.
IEC-PAS 62344 was submitted by the CIGRÉ (International Council on Large Electric
Systems) and has been processed by subcommittee 22F: Power electronics for electrical
transmission and distribution systems, of IEC technical committee 22: Power electronic
systems and equipment.
The text of this PAS is based on the This PAS was approved for publication by
following document: the P-members of the committee
concerned as indicated in the following
document:
Draft PAS Report on voting
22F/116/NP 22F/128/RVN
Following publication of this PAS, which is a pre-standard publication, the technical co
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.