IEC 62262:2002/AMD1:2021
(Amendment)Amendment 1 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
Amendment 1 - Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
Amendement 1 - Degrés de protection procurés par les enveloppes de matériels électriques contre les impacts mécaniques externes (Code IK)
General Information
Relations
Standards Content (Sample)
IEC 62262 ®
Edition 1.0 2021-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Degrees of protection provided by enclosures for electrical equipment against
external mechanical impacts (IK code)
Degrés de protection procurés par les enveloppes de matériels électriques
contre les impacts mécaniques externes (Code IK)
IEC 62262:2002-02/AMD1:2021-09(en-fr)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 62262 ®
Edition 1.0 2021-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Degrees of protection provided by enclosures for electrical equipment against
external mechanical impacts (IK code)
Degrés de protection procurés par les enveloppes de matériels électriques
contre les impacts mécaniques externes (Code IK)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.020 ISBN 978-2-8322-1023-5
– 2 – IEC 62262:2002/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES
FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL
MECHANICAL IMPACTS (IK CODE)
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 62262:2002 has been prepared by IEC technical committee 70: Degrees
of protection provided by enclosures.
The text of this Amendment is based on the following documents:
Draft Report on voting
70/157/FDIS 70/158/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.
© IEC 2021
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
1 Scope
Replace the existing text with the following new text:
This document refers to the classification of the degrees of protection provided by enclosures
against external mechanical impacts when the rated voltage of the protected equipment is not
greater than 72,5 kV.
The object of this document is to give
a) the definitions for the degrees of protection provided by enclosures of electrical equipment
as regards protection of the equipment inside the enclosure against harmful effects of
mechanical impacts;
b) the designations for the degrees of protection;
c) the requirements for each designation;
d) the tests to be performed to verify that the enclosure meets the requirements of this
document.
It will remain the responsibility of individual technical committees to decide on the extent and
manner in which the classification is used in their standards and to define the "enclosure" as it
applies to their equipment and to ensure that for a given classification, the tests do not differ
from those specified in this document. If necessary, complementary requirements can be
included in the relevant product standard.
For a particular type of equipment, a product committee can specify different requirements
provided that at least the same level of safety is ensured.
This document deals only with enclosures that are in all other respects suitable for their
intended use as specified in the relevant product standard and which, from the point of view of
materials and workmanship, ensure that the claimed degrees of protection are maintained under
the normal conditions of use.
– 4 – IEC 62262:2002/AMD1:2021
© IEC 2021
2 Normative references
Replace the existing introductory paragraph with the following:
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
Delete the reference to IEC 60050(826):1982.
Replace the references to IEC 60068-1:1988 and IEC 60068-2-75:1997 with the following new
references:
IEC 60068-1, Environmental testing – Part 1: General and guidance
IEC 60068-2-75, Environmental testing – Part 2-75: Tests – Test Eh: Hammer tests
3 Definitions
Replace the existing title and introductory paragraph of Clause 3 with the following:
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
Replace the existing entry 3.1, including its footnote, with the following new entry:
3.1
enclosure
part providing protection of equipment against certain external influences and, in any direction,
protection against direct contact
Note 1 to entry: This definition needs the following explanations under the scope of this document:
a) Enclosures provide protection of equipment against harmful effects of mechanical impacts;
b) Barriers, shapes of openings or any other means – whether attached to the enclosure or formed by the enclosed
equipment – suitable to prevent or limit the penetration of the specified test probes are considered as a part of
the enclosure, except when they can be removed without the use of a key or tool.
[SOURCE: IEC 60529:1989, 3.1, modified – Reference to IEV 826-03-12 has been deleted and
the note has been replaced with a new Note 1 to entry.]
© IEC 2021
4 Designations
Delete the existing paragraph.
4.1 Arrangement of the IK code
Add, before the existing text "IK 05", the following new text:
The degree of protection provided by an enclosure against mechanical impacts is indicated by
the IK code in the following way:
Replace, in the last paragraph, "(00
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.