IEC TR 60919-2:2008/AMD1:2015
(Amendment)Amendment 1 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching
Amendment 1 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching
Amendement 1 - Fonctionnement des systèmes à courant continu haute tension (CCHT) munis de convertisseurs commutés par le réseau - Partie 2: Défauts et manoeuvres
General Information
Relations
Standards Content (Sample)
IEC TR 60919-2 ®
Edition 2.0 2015-06
TECHNICAL
REPORT
RAPPORT
TECHNIQUE
AMENDMENT 1
AMENDEMENT 1
Performance of high-voltage direct current (HVDC) systems with line-
commutated converters –
Part 2: Faults and switching
Fonctionnement des systèmes à courant continu haute tension (CCHT) munis
de convertisseurs commutés par le réseau –
Partie 2: Défauts et manoeuvres
IEC TR 60919-2:2008-11/AMD1:2015-06(en-fr)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,
77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC Plus de 60 000 entrées terminologiques électrotechniques, en
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des
CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC TR 60919-2 ®
Edition 2.0 2015-06
TECHNICAL
REPORT
RAPPORT
TECHNIQUE
AMENDMENT 1
AMENDEMENT 1
Performance of high-voltage direct current (HVDC) systems with line-
commutated converters –
Part 2: Faults and switching
Fonctionnement des systèmes à courant continu haute tension (CCHT) munis
de convertisseurs commutés par le réseau –
Partie 2: Défauts et manoeuvres
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.200; 29.240.99 ISBN 978-2-8322-2719-0
– 2 – IEC TR 60919-2:2008/AMD1:2015
© IEC 2015
FOREWORD
This amendment has been prepared by subcommittee 22F: Power electronics for electrical
transmission and distribution systems, of IEC technical committee 22: Power electronic
systems and equipment.
The text of this amendment is based on the following documents:
DTR Report on voting
22F/344/DTR 22F/345A/RVC
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The French version of this amendment has not been voted upon.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
© IEC 2015
2 Normative references
Replace the existing reference to “IEC TR 60919-1:2005”by the following new reference:
IEC TR 60919-1:2010, Performance of high-voltage direct current (HVDC) systems with line-
commutated converters – Part 1: Steady-state conditions
Amendment 1:2013
Replace the existing words “IEC 60919-3”by “IEC TR 60919-3:2009”.
4.2 Energization and de-energization of a.c. side equipment
Replace the second existing sentence of the eighth paragraph by the following new sentence:
When disconnecting a converter transformer from the a.c. network, the transformer should be
disconnected maintaining the a.c. filters connected in parallel if possible, instead of
disconnecting the transformer alone or by using synchronizing devices.
Delete, in the ninth paragraph of this subclause, the sentence starting with "Some
breakers …".
5.3.2 Power transfer during faults
Replace, in the fourth paragraph of this subclause, the existing words “reactive control”by
“reactive power control”.
5.3.6 Switching of reactive power equipment
Delete the fourth existing paragraph of this subclause.
5.3.7 Effects of harmonic voltages and current during faults
Add, at the end of the fourth paragraph of this subclause, the following new sentences:
In this case that digital type relays were used, misoperation could be prevented for some
degree of harmonic component. However, it should be taken into account that existing relays
of old type do not have immunity to harmonics.
– 4 – IEC TR 60919-2:2008/AMD1:2015
© IEC 2015
Figure 2 – Example of voltage dependent control characteristics
Replace the existing figure and key by the following new figure and new key:
1,0
For decreasing I :
o
Ramp or exponential
( = 20 ms, = 10 ms)
R I
0,8
For increasing I :
o
Ramp or exponential
0,6
( = 20 ms, = 10 ms)
R I
0,4
Rectifier
Inverter
0,2
0,2 0,4 0,6 0,8 1,0 U p.u.
d
IEC
Key
U d.c. voltage
d
I current order
o
τ and τ rectifier and inverter time constants, respectively
R I
Figure 2 – Example of voltage dependent control characteristics
6.1 General
Delete, in the existing second paragraph of this s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.