IEC SRD 62913-2-4:2019
(Main)Generic smart grid requirements - Part 2-4: Electric transportation related domain
Generic smart grid requirements - Part 2-4: Electric transportation related domain
IEC SRD 62913-2-4:2019(E) initiates and illustrates the IEC's systems approach based on Use Cases and involving the identification of generic smart grid requirements for further standardization work for the electric transportation domain, based on the methods and tools developed in IEC SRD 62913-1.
This document captures possible "common and repeated usage" of a smart grid system, under the format of "Use Cases" with a view to feeding further standardization activities. Use Cases can be described in different ways and can represent competing alternatives. From there, this document derives the common requirements to be considered by these further standardization activities in terms of interfaces between actors interacting with the given system.
To this end, Use Case implementations are given for information purposes only. The interface requirements to be considered for later standardization activities are summarized (typically information pieces, communication services and specific non-functional requirements: performance level, security specification, etc.).
This analysis is based on the business input from domain experts as well as existing material on electric transportation in a smart grid environment when relevant.
General Information
Standards Content (Sample)
IEC SRD 62913-2-4 ®
Edition 1.0 2019-05
SYSTEMS
REFERENCE DELIVERABLE
colour
inside
Generic smart grid requirements –
Part 2-4: Electric transportation related domain
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC SRD 62913-2-4 ®
Edition 1.0 2019-05
SYSTEMS
REFERENCE DELIVERABLE
colour
inside
Generic smart grid requirements –
Part 2-4: Electric transportation related domain
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.020; 29.240; 33.200 ISBN 978-2-8322-6883-4
– 2 – IEC SRD 62913-2-4:2019 © IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 10
4 Electric transportation . 10
4.1 Purpose and scope . 10
4.1.1 Clause objective . 10
4.1.2 General context . 10
4.2 Business analysis . 11
4.2.1 General overview . 11
4.2.2 List of business Use Cases and business roles of the domain . 12
4.2.3 List of system Use Cases and system roles . 16
4.3 Generic smart grid requirements . 19
4.3.1 List of requirements . 19
4.3.2 Other requirements . 21
Annex A (informative) Links with other TCs and gathered materials . 23
A.1 General . 23
A.2 Electric transportation . 23
A.2.1 Identified TCs . 23
Annex B (informative) Electric transportation Use Cases . 25
B.1 Business Use Cases . 25
B.2 System Use Cases . 75
Bibliography . 99
Figure 1 – Use Case domain overview of the electric transportation domain . 14
Figure 2 – Role model illustration mapped on SGAM . 19
Table 1 – Content of IEC SRD 62913-2-4:201 n . 7
Table 2 – Identified Business Use Cases of the domain . 12
Table 3 – Business roles of the domain . 15
Table 4 – Identified System Use Cases of the domain . 16
Table 5 – System Roles of the domain . 17
Table 6 – Requirements identified . 20
Table 7 - Function allocation between EV and EVSE . 21
Table B.1 – UC62913-2-4-B001 Charge an EV . 25
Table B.2 – UC62913-2-4-B002 Control the charge of an EV . 35
Table B.3 – UC62913-2-4-B003 Charge an EV with demand-response . 45
Table B.4 – UC62913-2-4-B004 Charge an EV with smart-charging . 48
Table B.5 – UC62913-2-4-B005 Provide smart bidirectional energy transfer . 52
Table B.6 – UC62913-2-4-B007 Provide frequency containment reserve services
through EV. 62
Table B.7 – UC62913-2-4-S001 Negotiate a charge plan for smart charging an EV . 75
– 4 – IEC SRD 62913-2-4:2019 © IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
GENERIC SMART GRID REQUIREMENTS –
Part 2-4: Electric transportation related domain
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC SRD 62913-2-4, which is a Systems Reference Deliverable, has been prepared by
IEC systems committee Smart Energy.
The text of this Systems Reference Deliverable is based on the following documents:
Draft SRD Report on voting
SyCSmartEnergy/85/DTS SyCSmartEnergy/101/RVDTS
Full information on the voting for the approval of this Systems Reference Deliverable can be
found in the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC SRD 62913 series, published under the general title Generic smart
grid requirements, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
– 6 – IEC SRD 62913-2-4:2019 © IEC 2019
INTRODUCTION
Under the general title Generic smart grid requirements, the IEC SRD 62913 series consists
of the following parts:
– Part 1: Specific application of the Use Case methodology for defining Generic smart grid
requirements according to the IEC System approach;
– Part 2 is composed of 5 subparts which refer to the clusters that group several domains:
• Part 2-1: Grid related domains – these include transmission grid management,
distribution grid management, microgrids and smart substation automation;
• Part 2-2: Market related domain;
• Part 2-3: Resources connected to the grid related domains – these include bulk
generation, distributed energy resources, smart home/commercial/industrial/DR-
customer energy management, and energy storage;
• Part 2-4: Electric transportation related domain;
• Part 2-5: Support functions related domains – these include metering management and
asset management.
IEC SRD 62913 refers to 'clusters' of domains for its different parts so as to provide a neutral
term for document management purposes simply because it is necessary to split in several
documents the broad scope of smart grid.
The purpose of this document is to define the generic smart grid requirements of electric
transportation domain, i.e. electric transportation domain, based on the methods and tools
developed in IEC SRD 62913-1.
T
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.