ISO 14648-1:2001

Micrographics — Quality control of COM recorders that generate images using a single internal display system — Part 1: Characteristics of the software test target

This part of ISO 14648 specifies the characteristics of a software test target that is electronically generated, to be used in COM recorder systems that can accept electronic forms. The components have been designed to check or test certain capabilities of the COM recorder system in order to enable image quality to be assessed and maintained. The recording method (i.e. laser scanner, cathode ray tube, light emitting diode, etc.) is not relevant in establishing the software test target components.

Micrographie — Contrôle de la qualité des microformes produites sur un système électronique (COM) de génération d'image adressage de points — Partie 1: Caractéristiques de la cible contrôle de la qualité

General Information

• Status: Published
• Publication Date: 12-Dec-2001
• ICS: 37.080 - Document imaging applications
• Technical Committee: ISO/TC 171 - Document management applications
• Drafting Committee: ISO/TC 171 - Document management applications
• Current Stage: 9060 - Close of review
• Start Date: 04-Jun-2029

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 14648-1
First edition
2001-12-01


Micrographics — Quality control of COM
recorders that generate images using
a single internal display system —
Part 1:
Characteristics of the software test target
Micrographie — Contrôle de la qualité des microformes produites sur
un système électronique (COM) de génération d’image adressage
de points —
Partie 1: Caractéristiques de la cible contrôle de la qualité




Reference number
ISO 14648-1:2001(E)
©
 ISO 2001

---------------------- Page: 1 ----------------------
ISO 14648-1:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland

ii © ISO 2001 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 14648-1:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 14648 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14648-1 was prepared by Technical Committee ISO/TC 171, Document imaging applications, Subcommittee
SC 1, Quality.
ISO 14648 consists of the following parts, under the general title Micrographics — Quality control of COM recorders
that generate images using a single internal display system:
— Part 1: Characteristics of the software test target
— Part 2: Method of use
© ISO 2001 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 14648-1:2001(E)
Introduction
This part of ISO 14648 provides a specification for characteristics of a software test target used for the image
quality evaluation of Computer Output Microfilm (COM) recorder systems that generate images using a single
internal display system.

iv © ISO 2001 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 14648-1:2001(E)

Micrographics — Quality control of COM recorders that generate
images using a single internal display system —
Part 1:
Characteristics of the software test target
1 Scope
This part of ISO 14648 specifies the characteristics of a software test target that is electronically generated, to be
used in COM recorder systems that can accept electronic forms. The components have been designed to check or
test certain capabilities of the COM recorder system in order to enable image quality to be assessed and
maintained. The recording method (i.e. laser scanner, cathode ray tube, light emitting diode, etc.) is not relevant in
establishing the software test target components.
2 Normative references
The foll
...