ISO 6747:2013

Earth-moving machinery — Dozers — Terminology and commercial specifications

ISO 6747:2013 establishes terminology and the content of commercial literature specifications for self-propelled crawler and wheeled dozers and their equipment.

Engins de terrassement — Bouteurs — Terminologie et spécifications commerciales

L'ISO 6747:2013 établit la terminologie et fixe le contenu des spécifications des documents commerciaux pour les bouteurs automoteurs à chenilles et à roues et pour leurs équipements.

General Information

• Status: Published
• Publication Date: 15-Jan-2013
• ICS: 01.040.53 - Materials handling equipment (Vocabularies)
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: ISO/TC 127/SC 4 - Terminology, commercial nomenclature, classification and ratings
• Drafting Committee: ISO/TC 127/SC 4 - Terminology, commercial nomenclature, classification and ratings
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 14-Mar-2024

Relations

• Revises: ISO 6747:1998 - Earth-moving machinery — Tractor-dozers — Terminology and commercial specifications
• Effective Date: 20-Jun-2008
• Revises: ISO 6747:1998/Amd 1:2003 - Earth-moving machinery — Tractor-dozers — Terminology and commercial specifications — Amendment 1
• Effective Date: 20-Jun-2008

Standards Content (Sample)

DRAFT INTERNATIONAL STANDARD ISO/DIS 6747
ISO/TC 127/SC 4 Secretariat: UNI
Voting begins on Voting terminates on

2012-02-01 2012-07-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION    МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ    ORGANISATION INTERNATIONALE DE NORMALISATION


Earth-moving machinery — Tractor-dozers — Terminology and
commercial specifications
Engins de terrassement — Bouteurs — Terminologie et spécifications commerciales
[Revision of third edition (ISO 6747:1998) and of ISO 6747:1998/Amd.1:2003]
ICS 01.040.53; 53.100







In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.

To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.



THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME
STANDARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©  International Organization for Standardization, 2012

---------------------- Page: 1 ----------------------
ISO/DIS 6747

Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user’s country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic,
photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.

ii © ISO 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/DIS 6747

Contents Page
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General . 1
3.2 Masses . 7
3.2.2 Axle distribution of masses of wheeled machines . 7
3.3 Performance . 7
3.3.5 Winch performance . 8
4 Base machine . 9
4.1 Type of dozer . 9
4.1.1 Undercarriage .
...

INTERNATIONAL ISO
STANDARD 6747
Fourth edition
2013-02-01
Earth-moving machinery — Dozers —
Terminology and commercial
specifications
Engins de terrassement — Bouteurs — Terminologie et
spécifications commerciales
Reference number
ISO 6747:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 6747:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 6747:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General . 1
3.2 Masses . 7
3.3 Performance . 8
4 Base machine . 9
4.1 Type of dozer . 9
4.2 Dimensions .11
4.3 Nomenclature (see diagram numbers) .18
5 Commercial literature specifications.23
5.1 Engine .23
5.2 Transmission .23
5.3 Hydraulic system .24
5.4 System fluid capacities .24
5.5 Blade specification .24
5.6 Masses .24
5.7 Overall dimensions .25
5.8 Crawler machines .
...

NORME ISO
INTERNATIONALE 6747
Quatrième édition
2013-02-01
Engins de terrassement — Bouteurs
— Terminologie et spécifications
commerciales
Earth-moving machinery — Dozers — Terminology and commercial
specifications
Numéro de référence
ISO 6747:2013(F)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 6747:2013(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2013
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Publié en Suisse
ii © ISO 2013 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 6747:2013(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
3.1 Généralités . 1
3.2 Masses . 7
3.3 Performances . 8
4 Engin de base . 9
4.1 Type de bouteur . 9
4.2 Dimensions .11
4.3 Nomenclature (se reporter aux numéros des schémas) .18
5 Spécifications commerciales .23
5.1 Moteur .23
5.2 Transmission .23
5.3 Système hydraulique .24
5.4 Capacités du système de fluide .24
5.5 Spécifications de la lame .24
5.6 Masses .24
5.7 Dimensions hors tout .25
5.8 Bo
...