ISO 834-1:1999/Amd 2:2021

Fire-resistance tests — Elements of building construction — Part 1: General requirements — Amendment 2

Essai de résistance au feu — Éléments de construction — Partie 1: Exigences générales — Amendement 2

General Information

• Status: Published
• Publication Date: 07-Dec-2021
• ICS: 13.220.50 - Fire-resistance of building materials and elements
• Technical Committee: ISO/TC 92/SC 2 - Fire containment
• Drafting Committee: ISO/TC 92/SC 2/WG 1 - General requirements
• Current Stage: 6060 - International Standard published
• Start Date: 08-Dec-2021
• Due Date: 26-Aug-2023
• Completion Date: 08-Dec-2021

Relations

• Amends: ISO 834-1:1999 - Fire-resistance tests — Elements of building construction — Part 1: General requirements
• Effective Date: 12-Jun-2021

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 834-1
First edition
1999-09-15
AMENDMENT 2
2021-12
Fire-resistance tests — Elements of
building construction —
Part 1:
General requirements
AMENDMENT 2
Essai de résistance au feu — Éléments de construction —
Partie 1: Exigences générales
AMENDEMENT 2
Reference number
ISO 834-1:1999/Amd.2:2021(E)
© ISO 2021

---------------------- Page: 1 ----------------------
ISO 834-1:1999/Amd.2:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 834-1:1999/Amd.2:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 92, Fire safety, Subcommittee SC 2, Fire
containment.
A list of all parts in the ISO 834 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iii
© ISO 2021 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 834-1:1999/Amd.2:2021(E)
Fire-resistance tests — Elements of building
construction —
Part 1:
General requirements
AMENDMENT 2

Normative references
Add the following reference:
ISO 834-2, Fire-resistance tests — Elements of building construction — Part 2: Requirements and
recommendations for measuring furnace exposure on test samples
Update references
ISO 13943, Fire safety — Vocabulary
IEC 60584-1, Thermocouples — Part 1: EMF specifications and tolerances

6.7
Replace the existing subclause with the following:
6.7  Calibration
6.7.1  Calibration of
...