ISO 3166-3:2020
(Main)Codes for the representation of names of countries and their subdivisions — Part 3: Code for formerly used names of countries
Codes for the representation of names of countries and their subdivisions — Part 3: Code for formerly used names of countries
This document specifies basic guidelines for the implementation and maintenance of codes for formerly used names of countries. This code is intended to represent non-current country names, i.e. the country names deleted from ISO 3166 since its first publication in 1974.
Codes pour la représentation des noms de pays et de leurs subdivisions — Partie 3: Code pour les noms de pays antérieurement utilisés
Le présent document spécifie les principes directeurs pour la mise en application et la mise à jour des codes pour les noms de pays antérieurement utilisés. Ce code est établi pour représenter les noms de pays atsoumis à essais dans le passé, c'est-à-dire des pays dont les noms ont été supprimés de l'ISO 3166 depuis sa première publication en 1974.
Kode za predstavljanje imen držav in njihovih podrejenih enot - 3. del: Kode za nekdanja imena držav
General Information
Relations
Related Packages
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2020
Nadomešča:
SIST ISO 3166-3:2015
Kode za predstavljanje imen držav in njihovih podrejenih enot - 3. del: Kode za
nekdanja imena držav
Codes for the representation of names of countries and their subdivisions -- Part 3: Code
for formerly used names of countries
Codes pour la représentation des noms de pays et de leurs subdivisions -- Partie 3:
Code pour les noms de pays antérieurement utilisés
Ta slovenski standard je istoveten z: ISO 3166-3:2020
ICS:
01.140.20 Informacijske vede Information sciences
01.140.30 Dokumenti v upravi, trgovini Documents in administration,
in industriji. commerce and industry
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL ISO
STANDARD 3166-3
Third edition
2020-08
Codes for the representation of names
of countries and their subdivisions —
Part 3:
Code for formerly used names of
countries
Codes pour la représentation des noms de pays et de leurs
subdivisions —
Partie 3: Code pour les noms de pays antérieurement utilisés
Reference number
©
ISO 2020
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principles for inclusion in the list of formerly used names of countries .3
4.1 General . 3
4.2 Change of country name . 3
4.3 Division of country . 4
4.4 Merger of countries . 4
4.5 Obsolescence of country name . 4
4.6 Change of status of an alpha-2 country code element . 4
5 Principles for assigning code elements for formerly used country names .4
5.1 Structure of code elements for formerly used country names . 4
5.2 Change of country name (see 4.2) . 4
5.3 Division of country (see 4.3) . 5
5.4 Merger of countries (see 4.4) . 5
5.5 Deletion of country name (see 4.5) . 5
5.6 Change of country name (only alpha-3 code element affected) . 5
5.7 Change of status of an alpha-2 country code element (see 4.6) . 5
6 List of formerly used names of countries and their code elements .6
6.1 General . 6
6.2 Source of the list . 6
6.3 Content of the list . 6
7 Maintenance . 7
7.1 Maintenance Agency (ISO 3166/MA) . 7
7.2 Standard as a database — Change of paradigm . 7
7.3 Decoding table . 7
Bibliography . 8
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 46, Information and documentation.
This third edition cancels and replaces the second edition (ISO 3166-3:2013), which has been technically
revised.
The main changes compared to the previous edition are as follows.
— The codes have been moved to the database format.
— The components of the codes have been defined by descriptors, not by column or line numbers.
— The status of each alpha-2 country code element has been made explicit, as it is the main resource
managed by ISO 3166/MA, necessary for traceability over time.
— All characters in the database, specifically those with diacritical marks, have been checked with
Universal Coded Character Set, ISO/IEC 10646, and are used consistently.
— The database encoding is UTF-8 (Universal Character Set Transformation Format - 8 bits) from
ISO/IEC 10646, and the same has been used in many applications.
— The three parts — three codes — belong to the same database, updates are done only once for
all parts.
A list of all parts in the ISO 3166 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user's national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
Introduction
The initial edition of the International Standard ISO 3166 was prepared by Technical Committee
ISO/TC 46 in collaboration with the following International Organizations: Customs Cooperation
Council (CCC), [since 1995: World Customs Organization (WCO)], United Nations Economic Commission
for Europe (ECE), Food and Agriculture Organization of the United Nations (FAO), International
Atomic Energy Agency (IAEA), International Air Transport Association (IATA), International Chamber
of Commerce (ICC), International Chamber of Shipping (ICS), International Federation of Library
Associations (IFLA), International Labour Office (ILO), International Telecommunication Union (ITU),
International Union of Railways (UIC), United Nations Organization (UN), United Nations Conference
on Trade and Development (UNCTAD), Universal Postal Union (UPU), World Intellectual Property
Organization (WIPO), and World Health Organization (WHO).
ISO 3166 was first published in 1974, subsequent editions in 1981, 1988 and 1993. In 1997, it was
divided into three parts.
— Editions of ISO 3166-1: ISO 3166-1:1997, ISO 3166-1:2006, ISO 3166-1:2013.
— Editions of ISO 3166-2: ISO 3166-2:1998, ISO 3166-2:2007, ISO 3166-2:2013.
— Editions of ISO 3166-3: ISO 3166-3:1999, ISO 3166-3:2013.
The ISO 3166 series provides universally applicable coded representations of names of countries
(current and non-current), dependencies, and other areas of particular geopolitical interest and their
subdivisions.
ISO 3166-1 establishes codes that represent the current names of countries, dependencies, and other
areas of particular geopolitical interest, on the basis of country names obtained from the United
Nations.
ISO 3166-2 establishes a code that represents the names of the principal administrative divisions, or
similar areas, of the countries and entities included in ISO 3166-1.
ISO 3166-3 establishes a code that represents non-current country names, i.e. the country names
deleted from ISO 3166 since its first publication in 1974.
The ISO 3166 series do not express any opinion whatsoever concerning the legal status of any country,
dependency, or other area named herein, or concerning its frontiers or boundaries.
The 2013 edition of the ISO 3166 series has been the last one published as paper standard, with the
descriptive text, and the codes together.
At the end of 2013, the split had happened: the ISO 3166 codes have been moved to the database format
(de facto merging three contents together), with access from ISO Online Browsing Platform, while the
descriptive text have been awaiting updates.
This 2020 edition of the ISO 3166 series of standards include an update of the descriptive text
(description of the codes) from 2013, for each of three parts. It takes into account the stricter database
rules imposed on the code itself, as opposed to paper documents.
The International Standard ISO 3166 has been the very first ISO achievement of the concept of
"standard as a database", implemented in the end of 2013. The ISO OBP (Online Browsing Platform)
is an application to visualise ISO3166 codes on the web interface, the data being stored in the unseen
database.
The International Standard ISO 3166, for each of its three parts - three codes - is formed of two
components: documented description of its content, and its related content inside a database.
Both terms "this document" and "the code corresponding to this document" are used throughout this
2020 edition of the ISO 3166 series.
INTERNATIONAL STANDARD ISO 3166-3:2020(E)
Codes for the representation of names of countries and
their subdivisions —
Part 3:
Code for formerly used names of countries
1 Scope
This docum
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.