IEC/IEEE 80005-1:2019/FDAmd 2
(Amendment)Utility connections in port — Part 1: High voltage shore connection (HVSC) systems — General requirements — Amendment 2
Utility connections in port — Part 1: High voltage shore connection (HVSC) systems — General requirements — Amendment 2
Alimentation des navires à quai — Partie 1: Systèmes de connexion à quai à haute tension — Exigences générales — Amendement 2
General Information
Relations
Standards Content (Sample)
AMENDMENT IEC/IEEE
80005-
1:2019
FDAM 2
Second edition
2019-03
AMENDMENT 2
ISO/TC 8/SC 3
Utility connections in port —
Secretariat: ANSI
Voting begins on:
Part 1:
2023-01-16
High voltage shore connection (HVSC)
Voting terminates on:
systems — General requirements
2023-03-13
AMENDMENT 2
Alimentation des navires à quai —
Partie 1: Systèmes de connexion à quai à haute tension — Exigences
générales
AMENDEMENT 2
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
IEC/IEEE 80005-1:2019/FDAM 2:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 1 ----------------------
IEC/IEEE 80005-1:2019/FDAM 2:2023(E)
AMENDMENT IEC/IEEE
80005-
1:2019
FDAM 2
Second edition
2019-03
AMENDMENT 2
ISO/TC 8/SC 3
Utility connections in port —
Secretariat: ANSI
Voting begins on:
Part 1:
2023-01-16
High voltage shore connection (HVSC)
Voting terminates on:
systems — General requirements
2023-03-13
AMENDMENT 2
Alimentation des navires à quai —
Partie 1: Systèmes de connexion à quai à haute tension — Exigences
générales
AMENDEMENT 2
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
IEC/IEEE 80005-1:2019/FDAM 2:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 2 ----------------------
IEC/IEEE CDV 80005-1:2019/AMD2 – 3 –
© IEC/IEEE 2022
rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be
obtained from ISO or the IEEE Standards Association.
This amendment has been prepared by IEC technical committee 18: Electrical installations of
ships and of mobile and fixed offshore units, in cooperation with
• IEC subcommittee 23H: Plugs, socket-outlets and couplers for industrial and similar
applications, and for electric vehicles, of IEC technical committee 23: Electrical accessories,
• ISO subcommittee 3: Piping and machinery, of ISO technical committee 8: Ships and marine
technology, and
• IEEE IAS Petroleum and chemical industry committee.
This document is published as a triple logo (IEC, ISO and IEEE) standard.
The text of this amendment is based on the following documents:
Draft Report on voting
18/XX/FDIS 18/XX/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table. In ISO, the amendment has been approved by XXX
P members out of YYY having cast a vote.
The language used for the development of this Amendment is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
4 General requirements
Add, after the existing 4.9, the following new subclause:
4.10 Ship specifc annexes
Annex B to Annex G are ship specific annexes that include additional requirements to safety
and compatibility for compliant ships at different compliant berths.
---------------------- Page: 3 ----------------------
– 4 – IEC/IEEE CDV 80005-1:2019/AMD2
© IEC/IEEE 2022
Additional annex:
Annex G
(normative)
Additional requirements for vehicle carriers
G.1 General
Annex G describes the additional requirements to HVSC systems of vehicle carriers, meaning
multi-deck roll-on, roll-off cargo ships designed to carry empty cars and trucks, other than those
vessel types in Annex B.
The clause numbering of Anne
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.