ISO/CIE FDIS 26182

Lighting of outdoor work places — Lighting requirements for safety and security

ISO 26182:2006 specifies the lighting requirements which will contribute to the visual needs for safety and security within outdoor work places

Éclairage des lieux de travail extérieurs — Exigences requises de l'éclairage en matière de sûreté et de sécurité

General Information

• Status: Withdrawn
• ICS: 91.160.10 - Interior lighting
• Technical Committee: CIE - International Commission on Illumination
• Drafting Committee: CIE - International Commission on Illumination
• Current Stage: 5098 - Project deleted
• Completion Date: 23-Jun-2006

Relations

• Revised: ISO 8995-3:2006 - Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places
• Effective Date: 15-Apr-2008

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 26182
CIE S 016/E
CIE
Lighting of outdoor work places —
Voting begins on:
2006-01-20
Lighting requirements for safety and
security
Voting terminates on:
2006-06-20
Éclairage des lieux de travail extérieurs — Exigences requises de

l'éclairage en matière de sûreté et de sécurité


Please see the administrative notes on page ii-1

RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORT-
ING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 26182:2006(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON CIE S 016/E:2005
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2006

---------------------- Page: 1 ----------------------
ISO/FDIS 26182:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic,
photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
© CIE 2005 — All rights reserved
ii © ISO 2006 – All rights reserved
FINAL DRAFT / PROJET FINAL

---------------------- Page: 2 ----------------------
ISO/FDIS 26182:2006(E)
This document is submitted to all ISO member bodies for voting within 5 months, as a standard prepared by
an international standardizing body. The proposer, the International Commission on Illumination (CIE), has
been recognized by the ISO Council as an international standardizing body for the purposes of Council
Resolution 42/1999.

Votes are required to be explicit: positive, negative or abstention. Any request or proposal to change the
text will be regarded as a negative vote.

In accordance with the provisions of Council Resolution 15/1993, this document is circulated in the
English language only.


© CIE 2005 — All rights reserved
© ISO 2006 – All rights reserved ii-1
FINAL DRAFT / PROJET FINAL

---------------------- Page: 3 ----------------------
ISO/FDIS 26182:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
ISO 26182 was prepared as Standard CIE S 016 by the International Commission on Illumination, which has
been recognized by the ISO Council as an international standardizing body. It was adopted by ISO under a
special procedure which requires approval by at least 75 % of the member bodes casting a vote, and is
published as a joint ISO/CIE edition.
The International Commission on Illumination (abbreviated as CIE from its French title) is an organization
devoted to international cooperation and exchange of information among its member countries on all matters
relating to the science and art of lighting.
ISO 26182 was prepared by Division 5 of the CIE.

© CIE 2005 — All rights reserved
© ISO 2006 – All rights reserved iii
FINAL DRAFT / PROJET FINAL

---------------------- Page: 4 ----------------------
ISO/FDIS 26182:2006(E)
CIE S 016/E:2005

© CIE 2005 — All rights reserved
iv © ISO 2006 – All rights reserved
FINAL DRAFT / PROJET FINAL

---------------------- Page: 5 ----------------------
ISO/FDIS 26182:2006(E)
CIE S 016/E:2005
CIE S 016/E:2005




Standard












Lighting of Outdoor Work Places -
Lighting Requirements for Safety and
Security


Beleuchtung von Arbeitsplätzen im Freien — Anforderungen hinsichtlich Arbeitssicherheit und
Anlagenschutz
Éclairage des lieux de travail extérieurs — Exigences requises de l'éclairage en matière de sûreté et
de sécurité










CIE Standards are copyrighted and shall not be reproduced in any form, entirely or partly, without the
explicit agreement of the CIE.








CIE Central Bureau, Vienna CIE S 016/E:2005
Kegelgasse 27, A-1030 Vienna, Austria

UDC: 628.971.9  Descriptor: Lighting for outdoor work
© CIE 2005 — All rights reserved
© ISO 2006 – All rights reserved v
FINAL DRAFT / PROJET FINAL

---------------------- Page: 6 ----------------------
ISO/FDIS 26182:2006(E)
CIE S 016/E:2005






























© CIE 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from CIE Central Bureau at the address below.
CIE Central Bureau
Kegelgasse 27
A-1030 Vienna
Austria
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]
Web: www.cie.co.at/

© CIE 2005 — All rights reserved
vi © ISO 2006 – All rights reserved
FINAL DRAFT / PROJET FINAL

---------------------- Page: 7 ----------------------
ISO/FDIS 26182:2006(E)
CIE S 016/E:2005
FOREWORD
Standards produced by the Commission Internationale de l’Eclairage (CIE) are a concise
documentation of data defining aspects of light and lighting, for which international harmony
requires such unique definition. CIE Standards are therefore a primary source of
internationally accepted and agreed data, which can be taken, essentially unaltered, into
universal standard systems.
This document CIE S 016/E:2005 has been prepared by CIE Division 5 and should be
read in conjunction with CIE S 015/E:2005.

TABLE OF CONTENTS
FOREWORD . III
INTRODUCTION . 1
1. SCOPE . 1
2. NORMATIVE REFERENCES. 1
3. TERMS AND DEFINITIONS. 1
4. LIGHTING REQUIREMENTS FOR SAFETY AND SECURITY . 2
5. VERIFICATION PROCEDURES. 3
  5.1 Illuminance. 3
  5.2 Glare rating. 3
  5.3 Colour rendering index . 3
ANNEX A (NORMATIVE): LIGHTING DESIGN CRITERIA . 4
  A.1 Glare Rating .4
  A.2 Colour rendering . 4

BIBLIOGRAPHY. 5














© CIE 2005 — All rights reserved
© ISO 2006 – All rights reserved vii
FINAL DRAFT / PROJET FINAL

---------------------- Page: 8 ----------------------
ISO/FDIS 26182:2006(E)
CIE S 016/E:2005





























© CIE 2005 — All rights reserved
viii © ISO 2006 – All rights reserved
FINAL DRAFT / PROJET FINAL

-------------------
...