ISO 8995-3:2006

Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places

ISO 8995-3:2006 specifies the lighting requirements which will contribute to the visual needs for safety and security within outdoor work places

Éclairage des lieux de travail — Partie 3: Exigences requises de l'éclairage des lieux de travail extérieurs en matière de sûreté et de sécurité

General Information

• Status: Withdrawn
• Publication Date: 19-Oct-2006
• Withdrawal Date: 19-Oct-2006
• ICS: 13.180 - Ergonomics
• ICS: 91.160.10 - Interior lighting
• Technical Committee: ISO/TC 274 - Light and lighting
• Drafting Committee: ISO/TC 274 - Light and lighting
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 09-Mar-2018

Relations

• Revised: ISO/CIE 8995-3:2018 - Lighting of work places — Part 3: Lighting requirements for safety and security of outdoor work places
• Effective Date: 16-Jan-2016
• Revises: ISO/CIE FDIS 26182 - Lighting of outdoor work places — Lighting requirements for safety and security
• Effective Date: 15-Apr-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 8995-3
CIE S 016/E
First edition
2006-10-15


Lighting of work places —
Part 3:
Lighting requirements for safety and
security of outdoor work places
Éclairage des lieux de travail —
Partie 3: Exigences requises de l'éclairage des lieux de travail
extérieurs en matière de sûreté et de sécurité




Reference number
ISO 8995-3:2006(E)
CIE S 016/E:2005
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 8995-3:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2006 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 8995-3:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
ISO 26182 was prepared as Standard CIE S 016 by the International Commission on Illumination, which has
been recognized by the ISO Council as an international standardizing body. It was adopted by ISO under a
special procedure which requires approval by at least 75 % of the member bodes casting a vote, and is
published as a joint ISO/CIE edition.
The International Commission on Illumination (abbreviated as CIE from its French title) is an organization
devoted to international cooperation and exchange of information among its member countries on all matters
relating to the science and art of lighting.
ISO 8995-3 was prepared by Division 5 of the CIE.
ISO 8995 consists of the following parts, under the general title Lighting of work places:
⎯ Part 1: Indoor
⎯ Part 2: Outdoor
⎯ Part 3: Lighting requirements for safety and security of outdoor work places
© ISO 2006 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 8995-3:2006(E)
CIE S 016/E:2005
CIE S 016/E:2005




Standard












Lighting of Outdoor Work Places -
Lighting Requirements for Safety and
Security


Beleuchtung von Arbeitsplätzen im Freien — Anforderungen hinsichtlich Arbeitssicherheit und
Anlagenschutz
Éclairage des lieux de travail extérieurs — Exigences requises de l'éclairage en matière de sûreté et
de sécurité










CIE Standards are copyrighted and shall not be reproduced in any form, entirely or partly, without the
explicit agreement of the CIE.








CIE Central Bureau, Vienna CIE S 016/E:2005
Kegelgasse 27, A-1030 Vienna, Austria

UDC: 628.971.9  Descriptor: Lighting for outdoor work
© CIE 2005 — All rights reserved
© ISO 2006 – All rights reserved v

---------------------- Page: 4 ----------------------
ISO 8995-3:2006(E)
CIE S 016/E:2005






























© CIE 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from CIE Central Bureau at the address below.
CIE Central Bureau
Kegelgasse 27
A-1030 Vienna
Austria
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]
Web: www.cie.co.at/

© CIE 2005 — All rights reserved
vi © ISO 2006 – All rights reserved

---------------------- Page: 5 ----------------------
ISO 8995-3:2006(E)
CIE S 016/E:2005
FOREWORD
Standards produced by the Commission Internationale de l’Eclairage (CIE) are a concise
documentation of data defining aspects of light and lighting, for which international harmony
requires such unique definition. CIE Standards are therefore a primary source of
internationally accepted and agreed data, which can be taken, essentially unaltered, into
universal standard systems.
This document CIE S 016/E:2005 has been prepared by CIE Division 5 and should be
read in conjunction with CIE S 015/E:2005.

TABLE OF CONTENTS
FOREWORD . III
INTRODUCTION . 1
1. SCOPE . 1
2. NORMATIVE REFERENCES. 1
3. TERMS AND DEFINITIONS. 1
4. LIGHTING REQUIREMENTS FOR SAFETY AND SECURITY . 2
5. VERIFICATION PROCEDURES. 3
  5.1 Illuminance. 3
  5.2 Glare rating. 3
  5.3 Colour rendering index . 3
ANNEX A (NORMATIVE): LIGHTING DESIGN CRITERIA . 4
  A.1 Glare Rating .4
  A.2 Colour rendering . 4

BIBLIOGRAPHY. 5














© CIE 2005 — All rights reserved
© ISO 2006 – All rights reserved vii

---------------------- Page: 6 ----------------------
ISO 8995-3:2006(E)
CIE S 016/E:2005
LIGHTING OF OUTDOOR WORK PLACES - LIGHTING REQUIREMENTS
FOR SAFETY AND SECURITY
INTRODUCTION
To enable people to perform visual tasks efficiently and accurately, especially during the
night, adequate and appropriate lighting has to be provided.
The degree of visibility and comfort required in a wide range of outdoor work places is
governed by the type and duration of activity.

1. SCOPE
This standard specifies the lighting requirements which will contribute to the visual needs for
safety and security within outdoor work places.

2. NORMATIVE REFERENCES
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
CIE S 015/E:2005. Lighting of outdoor work places.
CIE
...