ISO 8216-1:2024
(Main)Products from petroleum, synthetic and renewable sources — Fuels (class F) classification — Part 1: Categories of marine fuels
Products from petroleum, synthetic and renewable sources — Fuels (class F) classification — Part 1: Categories of marine fuels
This document defines the detailed classification of marine fuels within class F (fuels). It is intended to be read in conjunction with ISO 8216-99. NOTE Class F for fuels was originally defined as part of the method of classification for petroleum products given in ISO 8681.
Produits d’origine pétrolière, synthétique ou renouvelable — Classification des combustibles (classe F) — Partie 1: Catégories des combustibles pour la marine
Le présent document définit la classification détaillée des combustibles pour la marine appartenant à la classe F (combustibles). Il convient de lire le présent document en association avec l'ISO 8216-99. NOTE La classe F pour les combustibles a été définie à l'origine dans le cadre de la méthode de classification des produits pétroliers décrite dans l'ISO 8681.
General Information
Relations
Buy Standard
Standards Content (Sample)
International
Standard
ISO 8216-1
Sixth edition
Products from petroleum, synthetic
2024-04
and renewable sources — Fuels
(class F) classification —
Part 1:
Categories of marine fuels
Produits d’origine pétrolière, synthétique ou renouvelable —
Classification des combustibles (classe F) —
Partie 1: Catégories des combustibles pour la marine
Reference number
ISO 8216-1:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 8216-1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO 8216-1:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Explanation of symbols used . 1
5 Detailed classification . 2
Bibliography . 4
© ISO 2024 – All rights reserved
iii
---------------------- Page: 3 ----------------------
ISO 8216-1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of us
...
Norme
internationale
ISO 8216-1
Sixième édition
Produits d’origine pétrolière,
2024-04
synthétique ou renouvelable —
Classification des combustibles
(classe F) —
Partie 1:
Catégories des combustibles pour
la marine
Products from petroleum, synthetic and renewable sources —
Fuels (class F) classification —
Part 1: Categories of marine fuels
Numéro de référence
ISO 8216-1:2024(fr) © ISO 2024
---------------------- Page: 1 ----------------------
ISO 8216-1:2024(fr)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2024
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
© ISO 2024 – Tous droits réservés
ii
---------------------- Page: 2 ----------------------
ISO 8216-1:2024(fr)
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d'application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Explication des symboles utilisés . 1
5 Classification détaillée . 2
Bibliographie . 4
© ISO 2024 – Tous droits réservés
iii
---------------------- Page: 3 ----------------------
ISO 8216-1:2024(fr)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux
de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général
confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner l’utilisation
d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité et à l’applicabilité de
tout droit de brevet revendiqué à cet égard. À la date de publication du présent document, l’ISO n'avait pas
reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois,
il y a lieu d’avertir les responsables de la mise en application du présent document que des informations
plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible à l'adresse
w
...
FINAL DRAFT
International
Standard
ISO/FDIS 8216-1
ISO/TC 28/SC 4
Products from petroleum, synthetic
Secretariat: AFNOR
and renewable sources — Fuels
Voting begins on:
(class F) classification —
2024-02-06
Part 1:
Voting terminates on:
2024-04-02
Categories of marine fuels
Produits d’origine pétrolière, synthétique ou renouvelable —
Classification des combustibles (classe F) —
Partie 1: Catégories des combustibles pour la marine
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 8216-1:2024(en) © ISO 2024
---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 8216-1:2024(en)
International
Standard
ISO/FDIS 8216-1
ISO/TC 28/SC 4
Products from petroleum, synthetic
Secretariat: AFNOR
and renewable sources — Fuels
Voting begins on:
(class F) classification —
Part 1:
Voting terminates on:
Categories of marine fuels
Produits d’origine pétrolière, synthétique ou renouvelable —
Classification des combustibles (classe F) —
Partie 1: Catégories des combustibles pour la marine
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 8216-1:2024(en) © ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/FDIS 8216-1:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Explanation of symbols used . 1
5 Detailed classification . 2
Bibliography . 4
© ISO 2024 – All rights reserved
iii
---------------------- Page: 3 ----------------------
ISO/FDIS 8216-1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally ca
...
ISO/FDIS 8216--1:20232024(E) Style Definition: Heading 1: Indent: Left: 0 pt, First
line: 0 pt, Tab stops: Not at 21.6 pt
ISO TC 28/SC 4/WG 6
Style Definition: Heading 2: Font: Bold, Tab stops: Not
at 18 pt
Secretariat: AFNOR
Style Definition: Heading 3: Font: Bold
Date: 2023-11-152024-01-22
Style Definition: Heading 4: Font: Bold
Style Definition: Heading 5: Font: Bold
Products from petroleum, synthetic and renewable sources — Fuels (class F)
Style Definition: Heading 6: Font: Bold
classification — Part 1: Categories of marine fuels
Style Definition: ANNEX
Produits d’origine pétrolière, synthétique ou renouvelable — Classification des
Style Definition: Footer
combustibles (classe F) — Partie 1: Catégories des combustibles pour la marine
Style Definition: Header
Style Definition: Hashtag1
Style Definition: Mention1
Style Definition: Smart Hyperlink1
Style Definition: Unresolved Mention2
Style Definition: AMEND Terms Heading: Font: Bold
Style Definition: AMEND Heading 1 Unnumbered:
Font: Bold
Style Definition: IneraTableMultiPar: Font: (Default)
Arial, Not Bold, Font color: Black, Justified, Adjust space
between Latin and Asian text, Adjust space between
Asian text and numbers
Formatted: Different first page header
Formatted: Don't adjust space between Latin and
Asian text, Don't adjust space between Asian text and
numbers
Formatted: Font: Bold
---------------------- Page: 1 ----------------------
ISO/FDIS 8216-1:20232024(E)
© ISO 20232024 Formatted
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no
part of this publication may be reproduced or utilized otherwise in any form or by any means,
electronic or mechanical, including photocopying, or posting on the internet or an intranet, without
prior written permission. Permission can be requested from either ISO at the address below or
ISO's member body in the country of the requester.
ISO Copyright Office
CP 401 • CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: copyright@iso.orgcopyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland.
2 © ISO 2023 – All rights reserved
ii © ISO 2024 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/FDIS 8216-1:20232024(E)
Formatted: Right
Contents Page
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Explanation of symbols used . 1
5 Detailed classification . 2
Bibliography . 4
Foreword . iv
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Explanation of symbols used . 1
5 Detailed classification . 2
Table 1 — Classification of marine fuels . 2
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.