iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 11193-1:2008/Amd 1:2012

(Amendment)

Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1

Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution — Amendment 1

Gants en caoutchouc pour examen, non réutilisables — Partie 1: Spécifications pour gants fabriqués à partir de latex de caoutchouc ou d'une solution de caoutchouc — Amendement 1

General Information

Status
Withdrawn
Publication Date
17-Jun-2012
Withdrawal Date
17-Jun-2012
ICS
11.140 - Hospital equipment
83.140.99 - Other rubber and plastics products
Technical Committee
ISO/TC 45/SC 4 - Products (other than hoses)
Drafting Committee
ISO/TC 45/SC 4/WG 5 - Gloves and other latex products
Current Stage
9599 - Withdrawal of International Standard
Completion Date
06-Aug-2020
Ref Project

Relations

Revised
ISO 11193-1:2020 - Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
Effective Date
23-Apr-2020
Amends
ISO 11193-1:2008 - Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
Effective Date
04-Dec-2021

Buy Standard

ISO 11193-1:2008/Amd 1:2012ISO 11193-1:2008/Amd 1:2012
PreviousNext
Standard
ISO 11193-1:2008/Amd 1:2012
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 11193-1:2008/Amd 1:2012ISO 11193-1:2008/Amd 1:2012
PreviousNext
Standard
ISO 11193-1:2008/Amd 1:2012
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

МЕЖДУНАРОДНЫЙ ISO
СТАНДАРТ 11193-1
Второе издание
2008-09-01
ИЗМЕНЕНИЕ 1
2012-06-15

Перчатки медицинские одноразового
применения.
Часть 1.
Требования к перчаткам из
каучукового латекса или смесей на
основе каучука
ИЗМЕНЕНИЕ 1
Single-use medical examination gloves —
Part 1: Specification for gloves made from rubber latex or rubber
solution
AMENDMENT 1



Ответственность за подготовку русской версии несёт GOST R
(Российская Федерация) в соответствии со статьёй 18.1 Устава ISO
Ссылочный номерr
ISO 11193-1:2008/Amd.1:2012(R)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 11193-1:2008/Amd.1:2012(R)

ДОКУМЕНТ ЗАЩИЩЕН АВТОРСКИМ ПРАВОМ


© ISO 2012
Все права сохраняются. Если не указано иное, никакую часть настоящей публикации нельзя копировать или использовать в
какой-либо форме или каким-либо электронным или механическим способом, включая фотокопии и микрофильмы, без
предварительного письменного согласия ISO по адресу ниже или комитета-члена ISO в стране запрашивающей стороны.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Опубликовано в Швейцарии

ii © ISO 2012 – Все права сохраняются

---------------------- Page: 2 ----------------------
ISO 11193-1:2008/Amd.1:2012(R)
Предисловие
Международная организация по стандартизации (ISO) является всемирной федерацией национальных
организаций по стандартизации (комитетов-членов ISO). Разработка международных стандартов
обычно осуществляется техническими комитетами ISO. Каждый комитет-член, заинтересованный в
деятельности, для которой был создан технический комитет, имеет право быть представленным в этом
комитете. Международные правительственные и неправительственные организации, имеющие связи с
ISO, также принимают участие в работах. Что касается стандартизации в области электротехники, то
ISO работает в тесном сотрудничестве с Международной электротехни
...

INTERNATIONAL ISO
STANDARD 11193-1
Second edition
2008-09-01
AMENDMENT 1
2012-06-15
Single-use medical examination gloves —
Part 1:
Specification for gloves made from
rubber latex or rubber solution
AMENDMENT 1
Gants en caoutchouc pour examen, non réutilisables —
Partie 1: Spécifications pour gants fabriqués à partir de latex de
caoutchouc ou d’une solution de caoutchouc
AMENDEMENT 1
Reference number
ISO 11193-1:2008/Amd.1:2012(E)
©
ISO 2012

---------------------- Page: 1 ----------------------
ISO 11193-1:2008/Amd.1:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 11193-1:2008/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standard
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 10282:2023(Main)
Single-use sterile rubber surgical gloves — Specification

This document specifies requirements for packaged sterile rubber gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. This document is applicable to single-use gloves that are worn once and then discarded. It does not apply to examination or procedure gloves. This document covers gloves with smooth surfaces and gloves with textured surfaces over part or the whole glove. This document is intended to be a reference for the performance and safety of rubber surgical gloves. The safe and proper usage of surgical gloves and sterilization procedures with subsequent handling, packaging and storage procedures are outside the scope of this document.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 11193-1:2020(Main)
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution

This document specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from cross-contamination. It also covers rubber gloves intended for use in handling contaminated medical materials and gloves with smooth surfaces or with textured surfaces over all or part of the glove. This document is intended as a reference for the performance and safety of rubber examination gloves. It does not cover the safe and proper usage of examination gloves and sterilization procedures with subsequent handling, packaging and storage procedures.

  • Standard
    10 pages
    English language
    sale 15% off
  • Draft
    9 pages
    English language
    sale 15% off
ISO
ISO 11193-2:2006(Main)
Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)

ISO 11193-2:2006 specifies requirements for packaged sterile, or bulked non-sterile, poly(vinyl chloride) gloves intended for use in medical examinations, and diagnostic or therapeutic procedures, to protect the patient and the user from cross-contamination. It also covers poly(vinyl chloride) gloves intended for use in handling contaminated medical materials. ISO 11193-2:2006 is intended as a reference for the performance and safety of poly(vinyl chloride) examination gloves. The safe and proper usage of examination gloves and sterilization procedures with subsequent handling, packaging and storage procedures are outside the scope of ISO 11193-2:2006.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 10282:2023(Main)
Single-use sterile rubber surgical gloves — Specification

This document specifies requirements for packaged sterile rubber gloves intended for use in surgical procedures to protect the patient and the user from cross-contamination. This document is applicable to single-use gloves that are worn once and then discarded. It does not apply to examination or procedure gloves. This document covers gloves with smooth surfaces and gloves with textured surfaces over part or the whole glove. This document is intended to be a reference for the performance and safety of rubber surgical gloves. The safe and proper usage of surgical gloves and sterilization procedures with subsequent handling, packaging and storage procedures are outside the scope of this document.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO 11193-1:2020(Main)
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution

This document specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from cross-contamination. It also covers rubber gloves intended for use in handling contaminated medical materials and gloves with smooth surfaces or with textured surfaces over all or part of the glove. This document is intended as a reference for the performance and safety of rubber examination gloves. It does not cover the safe and proper usage of examination gloves and sterilization procedures with subsequent handling, packaging and storage procedures.

  • Standard
    10 pages
    English language
    sale 15% off
  • Draft
    9 pages
    English language
    sale 15% off
ISO
ISO 11193-2:2006(Main)
Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)

ISO 11193-2:2006 specifies requirements for packaged sterile, or bulked non-sterile, poly(vinyl chloride) gloves intended for use in medical examinations, and diagnostic or therapeutic procedures, to protect the patient and the user from cross-contamination. It also covers poly(vinyl chloride) gloves intended for use in handling contaminated medical materials. ISO 11193-2:2006 is intended as a reference for the performance and safety of poly(vinyl chloride) examination gloves. The safe and proper usage of examination gloves and sterilization procedures with subsequent handling, packaging and storage procedures are outside the scope of ISO 11193-2:2006.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 20200:2023(Main)
Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test

This document specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
ISO
ISO 9241-221:2023(Main)
Ergonomics of human-system interaction — Part 221: Human-centred design process assessment model

This document specifies the process references model (PRM) for human-centred design (HCD) according to ISO 9241-220, as well as the process assessment model (PAM) for assessing these processes, based on ISO/IEC 33020 and in accordance with the requirements of ISO/IEC 33004. This HCD PAM contains a set of indicators to be considered while interpreting the intent of the HCD PRM defined in ISO 9241-220. These indicators can also be applied when implementing a process improvement programme post an assessment. NOTE 1 The PRM in this document focuses on assessing HCD processes rather than system life cycle, for example as in ISO/IEC/IEEE 15288, or software life cycle, as in ISO/IEC/IEEE 12207. NOTE 2 If processes beyond the scope of ISO 9241-220 are required, appropriate processes from other PRMs, such as ISO/IEC/IEEE 12207, ISO/IEC/IEEE 15288 or ISO/TS 18152, can be added based on the business needs of the organization. The intended application of this document is computer-based interactive systems. While the processes apply to interactive systems that deliver services, they do not cover the design of those services. The relevant aspects of the processes can also be applied to simple or non-computer-based interactive systems. NOTE 3 HCD concentrates on the human-centred aspects of design and not on other aspects of design, such as mechanical construction, programming or the basic design of services. The process descriptions in this document provide the basis for a rigorous assessment of an enterprise’s capability to carry out human-centred processes in conformity with the ISO/IEC 33004 and ISO/IEC 33020. This document is intended for use by organizations that want to address and improve their treatment of human-centred design of either their internal systems or the products and services they provide, and the procurement of systems and parts of systems. The processes can be applied by small- and medium-sized enterprises as well as by large organizations. NOTE 4 The scope of application of the PAM is the same as that of the PRM, which is described in ISO 9241-220:2019, Clause 1.

  • Standard
    102 pages
    English language
    sale 15% off
ISO
ISO/TS 24665:2023(Main)
Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians

This document gives guidance and requirements for the education, examination and evaluation of the inspectors’ and maintenance technicians’ competence concerning public playground and recreational areas. This document describes the knowledge and competence required for each specific task an inspector or technician performs. This document is intended primarily for public playgrounds, but the principles are applicable to other recreational areas. This document does not include benefit/risk assessment methods. This document does not cover the competence of staff conducting product certification. NOTE 1 The different types of inspections covered are: routine visual inspection; operational inspection; annual main inspection; post-installation inspection; post-accident inspection; pre-installation consultation; mid-installation surveillance. NOTE 2 This document can be applicable to: roller-sport infrastructure; multi-sport arenas; outdoor exercise equipment; bouldering walls; portable and permanent socketed goals; parkour facilities; adventure playgrounds; ropes courses; inflatable play equipment.

  • Technical specification
    23 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
  • Draft
    22 pages
    English language
    sale 15% off
ISO
ISO 19642-1:2023(Main)
Road vehicles — Automotive cables — Part 1: Vocabulary and design guidelines

This document defines terms in the field of cables applied in road vehicle general purpose applications, for use in the other parts of the ISO 19642 series.

  • Standard
    27 pages
    English language
    sale 15% off