Bamboo-wood composite for container flooring

This document specifies the classification, technical requirements, inspection methods, inspection rules, marking, packaging, transportation and storage of bamboo-wood composite for container flooring. This document is applicable to the types of freight containers specified in ISO 1496-1:2013, ISO 1496-1:2013/Amd 1:2016 and ISO 1496-1:2013/Amd 2:2024.

Titre manque

General Information

Status
Published
Publication Date
05-Aug-2024
Current Stage
6060 - International Standard published
Start Date
06-Aug-2024
Due Date
08-Mar-2024
Completion Date
06-Aug-2024
Ref Project

Buy Standard

Standard
ISO 5942:2024 - Bamboo-wood composite for container flooring Released:6. 08. 2024
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


International
Standard
ISO 5942
First edition
Bamboo-wood composite for
2024-08
container flooring
Reference number
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Technical requirements . 2
5.1 Specifications .2
5.1.1 Size and tolerance .2
5.1.2 Diagonal difference .2
5.1.3 Edge straightness .2
5.1.4 Degree of warping .3
5.2 Appearance quality .3
5.3 Physical and mechanical properties .6
5.4 Floor strength .7
5.5 Anti-insect and antiseptic treatments . .7
6 Inspection methods . 7
6.1 Size specification .7
6.2 Diagonal difference.7
6.3 Edge straightness .7
6.4 Degree of warping .7
6.5 Appearance quality .7
6.6 Physical and mechanical properties .8
6.6.1 Specimen preparation .8
6.6.2 Standard conditioning .8
6.6.3 Density .8
6.6.4 Moisture content .9
6.6.5 Bond durability .9
6.6.6 Short span bending force .9
6.6.7 Concentrated load .9
6.6.8 Floor strength .11
7 Inspection rules .11
7.1 Inspection category.11
7.1.1 General .11
7.1.2 Delivery inspection .11
7.1.3 Type inspection .11
7.1.4 Floor strength inspection . 12
7.2 Group principle . . 12
7.3 Sampling methods . 12
7.3.1 General . 12
7.3.2 Appearance quality inspection . 12
7.3.3 Specifications inspection . 12
7.3.4 Physical and mechanical properties inspection . 13
7.4 Comprehensive judgement . 13
7.4.1 Determination of test results . 13
7.4.2 Comprehensive judgement . 13
8 Marking, packaging, transportation and storage . 14
8.1 Marking .14
8.1.1 Product marking.14
8.1.2 Packaging label .14
8.2 Packaging .14
8.3 Transportation and storage .14
Annex A (informative) Details for reference of the simulated freight container base underframe .15

iii
Bibliography .18

iv
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 296, Bamboo and rattan.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

v
International Standard ISO 5942:2024(en)
Bamboo-wood composite for container flooring
1 Scope
This document specifies the classification, technical requirements, inspection methods, inspection rules,
marking, packaging, transportation and storage of bamboo-wood composite for container flooring.
This document is applicable to the types of freight containers specified in ISO 1496-1:2013, ISO 1496-1:2013/
Amd 1:2016 and ISO 1496-1:2013/Amd 2:2024.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their conten
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.