Space systems — Fluid characteristics, sampling and test methods — Part 11: Ammonia

ISO 15859-11:2004 specifies limits for the composition of ammonia (NH3) and establishes the sampling and test requirements applicable for the verification of the ammonia composition. ISO 15859-11:2004 is applicable to sampling and test methods for ammonia used in both flight hardware and ground support facilities, systems, and equipment. ISO 15859-11:2004 is applicable to ammonia influents only within the specified limits herein. ISO 15859-11:2004 is applicable to any sampling operation required to ensure that, when the fluid enters the launch vehicle or spacecraft, the fluid composition complies with the limits provided hereafter or with any technical specification agreed to for a particular use.

Systèmes spatiaux — Caractéristiques, échantillonnage et méthodes d'essai des fluides — Partie 11: Ammoniac

L'ISO 15859-11:2004 donne les valeurs limites de la composition de l'ammoniac et établit les exigences relatives à son échantillonnage et aux méthodes d'essai applicables pour vérifier sa composition. Elle est applicable à l'ammoniac utilisé dans les systèmes spatiaux, aussi bien dans le matériel embarqué que dans les installations, systèmes et équipements au sol. Elle n'est applicable à l'ammoniac entrant dans le système spatial que dans les limites spécifiées. L'ISO 15859-11:2004 est applicable à toute opération d'échantillonnage nécessaire pour garantir que, lorsque le fluide pénètre dans le lanceur ou dans le véhicule spatial, sa composition est conforme aux valeurs limites définies ci-après ou aux spécifications techniques approuvées en vue d'une utilisation particulière.

General Information

Status
Published
Publication Date
08-Jun-2004
Current Stage
9093 - International Standard confirmed
Completion Date
18-Jan-2020
Ref Project

Buy Standard

Standard
ISO 15859-11:2004 - Space systems -- Fluid characteristics, sampling and test methods
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 15859-11:2004 - Systemes spatiaux -- Caractéristiques, échantillonnage et méthodes d'essai des fluides
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 15859-11
First edition
2004-06-01


Space systems — Fluid characteristics,
sampling and test methods —
Part 11:
Ammonia
Systèmes spatiaux — Caractéristiques, échantillonnage et méthodes
d'essai des fluides —
Partie 11: Ammoniac





Reference number
ISO 15859-11:2004(E)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 15859-11:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 15859-11:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 15859-11 was prepared by Technical Committee ISO/TC 20, Aircraft and space vehicles, Subcommittee
SC 14, Space systems and operations.
ISO 15859 consists of the following parts, under the general title Space systems — Fluid characteristics,
sampling and test methods:
— Part 1: Oxygen
— Part 2: Hydrogen
— Part 3: Nitrogen
— Part 4: Helium
— Part 5: Nitrogen tetroxide propellants
— Part 6: Monomethylhydrazine propellant
— Part 7: Hydrazine propellant
— Part 8: Kerosine propellant
— Part 9: Argon
— Part 10: Water
— Part 11: Ammonia
— Part 12: Carbon dioxide
— Part 13: Breathing air
© ISO 2004 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 15859-11:2004(E)
Introduction
Fluid operations at a spaceport or launch site may involve a number of operators and supplier/customer
interfaces, from the fluid production plant to the delivery to the launch vehicle or spacecraft. The purpose of
ISO 15859 is to establish uniform requirements for the components, sampling and test methods of fluids used
in the servicing of launch vehicles, spacecraft and ground support equipment. The fluid composition limits
specified are intended to define the purity and impurity limits of the fluid for loading into the launch vehicle or
spacecraft. The fluid sampling and test methods are intended to be applied by any operator. The fluid
sampling and test methods are acceptable methods for verification of the fluid composition limits.

iv © ISO 2004 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 15859-11:2004(E)

Space systems — Fluid characteristics, sampling and test
methods —
Part 11:
Ammonia
1 Scope
This part of ISO 15859 specifies limits for the composition of ammonia (NH ) and establishes the sampling
3
and test requirements applicable for the verification of the ammonia composition.
This part of ISO 15859 is applicable to sampling and test methods for ammonia used in both flight hardware
and ground support facilities, systems, and equipment. This part of ISO 15859 is applicable to ammonia
influents only within the specified limits herein.
This part of ISO 15859 is applicable to any sampling operation required to ensure that, when the fluid enters
the launch vehicle or spacecraft, the fluid composition complies with the limits provided hereafter or with any
technical specification agreed to for a particular use.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 7103, Liquefied anhydrous ammonia for industrial use — Sampling — Taking a laboratory sample
ISO 7104, Liquefied anhydrous ammonia for industrial use — Determination of water content — Gas
chromatographic method
ISO 7105, Liquefied anhydrous ammonia for industrial use — Determination of water content — Karl Fischer
method
ISO 7106, Liquefied anhydrous ammonia for industrial use — Determination of oil content — Gravimetric and
infra-red spectrometric methods
ISO 9000, Quality management systems — Fundamentals and vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 9000 and the following apply.
3.1
indirect method
method of measuring fluid purity by indirect means, which consists in measuring the total volume fraction or
mass fraction (in %) of aggregate impurities and subtracting this total from 100
© ISO 2004 – All rights reserved 1

---------------------- Page: 5 ----------------------
ISO 15859-11:2004(E)
3.2
verification test
analysis performed on the fluid in the container, or a sample thereof, which is representative of the supply,
permitting the verification of fluid composition limits
4 Chemical composition
Unless otherwise provided in the applicable technical specification, the composition of ammonia delivered to
the flight vehicle interface shall be in accordance with the limits given in Table 1 when tested in accordance
with the applicable test methods.
Table 1 — Composition li
...

NORME ISO
INTERNATIONALE 15859-11
Première édition
2004-06-01


Systèmes spatiaux — Caractéristiques,
échantillonnage et méthodes d'essai des
fluides —
Partie 11:
Ammoniac
Space systems — Fluid characteristics, sampling and test methods —
Part 11: Ammonia





Numéro de référence
ISO 15859-11:2004(F)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 15859-11:2004(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2004
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2004 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 15859-11:2004(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 15859-11 a été élaborée par le comité technique ISO/TC 20, Aéronautique et espace, sous-comité
SC 14, Systèmes spatiaux, développement et mise en œuvre.
L'ISO 15859 comprend les parties suivantes, présentées sous le titre général Systèmes spatiaux —
Caractéristiques, échantillonnage et méthodes d'essai des fluides:
— Partie 1: Oxygène
— Partie 2: Hydrogène
— Partie 3: Azote
— Partie 4: Hélium
— Partie 5: Ergols à base de tétraoxyde d'azote
— Partie 6: Monométhylhydrazine (ergol)
— Partie 7: Hydrazine (ergol)
— Partie 8: Kérosène (carburant)
— Partie 9: Argon
— Partie 10: Eau
— Partie 11: Ammoniac
— Partie 12: Dioxyde de carbone
— Partie 13: Air respirable
© ISO 2004 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 15859-11:2004(F)
Introduction
Sur une base ou sur un site de lancement spatial, les opérations sur les fluides peuvent impliquer un certain
nombre d'opérateurs et d'interfaces fournisseur/client, depuis l'usine de production du fluide jusqu'au
chargement dans le lanceur ou dans le véhicule spatial. L'objet de l'ISO 15859 est d'harmoniser les exigences
relatives à la composition, à l'échantillonnage et aux méthodes d'essai des fluides utilisés dans le
ravitaillement des lanceurs, des véhicules spatiaux et des équipements de support au sol. Les limites
spécifiées de composition des fluides ont pour objectif de définir les valeurs limites de pureté et de teneur en
impuretés des fluides à charger dans le lanceur ou dans le véhicule spatial. L'échantillonnage et les méthodes
d'essai des fluides sont destinés à être respectés par tout opérateur. Ils sont acceptables pour la vérification
des limites de composition des fluides.

iv © ISO 2004 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 15859-11:2004(F)

Systèmes spatiaux — Caractéristiques, échantillonnage et
méthodes d'essai des fluides —
Partie 11:
Ammoniac
1 Domaine d'application
La présente partie de l'ISO 15859 donne les valeurs limites de la composition de l'ammoniac (NH ) et établit
3
les exigences relatives à son échantillonnage et aux méthodes d'essai applicables pour vérifier sa
composition.
La présente partie de l'ISO 15859 est applicable à l'ammoniac utilisé dans les systèmes spatiaux, aussi bien
dans le matériel embarqué que dans les installations, systèmes et équipements au sol. Elle n'est applicable à
l'ammoniac entrant dans le système spatial que dans les limites spécifiées ci-après.
La présente partie de l'ISO 15859 est applicable à toute opération d'échantillonnage nécessaire pour garantir
que, lorsque le fluide pénètre dans le lanceur ou dans le véhicule spatial, sa composition est conforme aux
valeurs limites définies ci-après ou aux spécifications techniques approuvées en vue d'une utilisation
particulière.
2 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO 7103, Ammoniac anhydre liquéfié à usage industriel — Échantillonnage — Prélèvement d'un échantillon
pour laboratoire
ISO 7104, Ammoniac anhydre liquéfié à usage industriel — Dosage de l'eau — Méthode par chromatographie
en phase gazeuse
ISO 7105, Ammoniac anhydre liquéfié à usage industriel — Dosage de l'eau — Méthode de Karl Fischer
ISO 7106, Ammoniac anhydre liquéfié à usage industriel — Dosage de l'huile — Méthode gravimétrique et
méthode spectrométrique dans l'infrarouge
ISO 9000, Systèmes de management de la qualité — Principes essentiels et vocabulaire
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions donnés dans l'ISO 9000 ainsi que les
suivants s'appliquent.
3.1
méthode indirecte
méthode de mesurage de la pureté d'un fluide par un moyen indirect, qui consiste à déterminer la fraction
volumique ou la fraction massique (en %) des impuretés totales et à soustraire cette quantité de 100 %
© ISO 2004 – Tous droits réservés 1

---------------------- Page: 5 ----------------------
ISO 15859-11:2004(F)
3.2
essai de vérification
analyse effectuée sur le fluide présent dans le conteneur ou sur un échantillon prélevé, représentatif du fluide
fourni, permettant de vérifier les limites de composition du fluide
4 Composition chimique
Sauf indication contraire dans une spécification technique applicable, la composition chimique de l'ammoniac
fourni à l'interface du véhicule spatial doit être conforme aux valeurs limites indiquées au Tableau 1,
lorsqu'elle est vérifiée conformément aux méthodes d'essai applicables.
Tableau 1 — Limites de composition
Composants Valeurs limites
a
Fraction mass
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.