Information technology — Keyboard layouts for text and office systems — Part 2: Alphanumeric section

ISO/IEC 9995 defines a framework for the layout of all alphanumeric and numeric keyboards across the widest spectrum of today's and upcoming applications using keyboards. The functions to be performed by keyboards are grouped into three categories that correspond to the main physical sections of the keyboard. Application of ISO/IEC 9995 in the design of keyboards will provide the user with a unified, predictable user-machine interface by dividing the keyboard into functional areas and sections and allocating functions to keys. ISO/IEC 9995-2:2009 specifies the alphanumeric section of a keyboard and the division of that section into zones; the arrangement, the number, and the location of the keys in the alphanumeric zone ZA0 of the alphanumeric section; and the layout and allocation of several control functions to the keys in the function zones of the alphanumeric section. The primary layout within the alphanumeric zone is established in most countries by a national standard or by national usage. ISO/IEC 9995-2:2009 provides allocation guidelines.

Technologies de l'information — Disposition des claviers conçus pour la bureautique — Partie 2: Module alphanumérique

L'ISO/CEI 9995 définit une structure pour la disposition de tous les claviers alphanumériques et numériques parmi le plus vaste éventail d'applications actuelles et à venir utilisant des claviers. Les fonctions exécutées par les claviers sont groupées en trois catégories qui correspondent aux principaux modules physiques du clavier. L'application de l'ISO/CEI 9995 dans la conception des claviers va fournir une interface utilisateur-machine uniforme et prévisible en divisant le clavier en zones et modules, et en affectant des fonctions aux touches. L'ISO/CEI 9995-2:2009 décrit le module alphanumérique d'un clavier et donne des indications sur la division de ce module en zones; elle définit également l'agencement, le nombre et l'emplacement des touches de la zone alphanumérique ZA0 du module, ainsi que la disposition et l'affectation de plusieurs fonctions de commande aux touches des zones de fonction du module. La disposition primaire au sein de la zone alphanumérique est établie dans la plupart des pays par une norme nationale ou par l'usage national. L'ISO/CEI 9995-2:2009 donne des lignes directrices d'affectation.

Informacijska tehnologija - Razpored tipk na tipkovnici za potrebe pisanja besedil in pisarniških sistemov - 2. del: Alfanumerični del

V okviru splošnega področja uporabe, opisanega v ISO/IEC 9995-1, ta del ISO/IEC 9995 določa alfanumerični del tipkovnice in delitev tega dela na področja; postavitev, število in lokacija tipk na alfanumeričnem področju ZAO alfanumeričnega dela; ter postavitev in dodelitev več nadzornih funkcij za tipke v funkcijskih področjih alfanumeričnega dela.

General Information

Status
Published
Publication Date
07-Oct-2009
Current Stage
9092 - International Standard to be revised
Completion Date
05-Dec-2023

Relations

Buy Standard

Standard
ISO/IEC 9995-2:2010
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO/IEC 9995-2:2009 - Information technology -- Keyboard layouts for text and office systems
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO/IEC 9995-2:2009 - Technologies de l'information -- Disposition des claviers conçus pour la bureautique
French language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ISO/IEC 9995-2:2010
01-julij-2010
1DGRPHãþD
SIST ISO/IEC 9995-2:2008
,QIRUPDFLMVNDWHKQRORJLMD5D]SRUHGWLSNQDWLSNRYQLFL]DSRWUHEHSLVDQMDEHVHGLO
LQSLVDUQLãNLKVLVWHPRYGHO$OIDQXPHULþQLGHO
Information technology - Keyboard layouts for text and office systems - Part 2:
Alphanumeric section
Technologies de l'information - Disposition des claviers conçus pour la bureautique -
Partie 2: Module alphanumérique
Ta slovenski standard je istoveten z: ISO/IEC 9995-2:2009
ICS:
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST ISO/IEC 9995-2:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO/IEC 9995-2:2010

---------------------- Page: 2 ----------------------

SIST ISO/IEC 9995-2:2010

INTERNATIONAL ISO/IEC
STANDARD 9995-2
Third edition
2009-10-15


Information technology — Keyboard
layouts for text and office systems —
Part 2:
Alphanumeric section
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 2: Module alphanumérique




Reference number
ISO/IEC 9995-2:2009(E)
©
ISO/IEC 2009

---------------------- Page: 3 ----------------------

SIST ISO/IEC 9995-2:2010
ISO/IEC 9995-2:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2009 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO/IEC 9995-2:2010
ISO/IEC 9995-2:2009(E)
Contents Page
Foreword .iv
1 Scope.1
2 Conformance .1
3 Normative references.1
4 Terms and definitions .1
5 Arrangement and Location.1
6 Division into zones.1
7 Arrangement and location of keys in the alphanumeric zone of the alphanumeric section.2
7.1 General keyboard arrangement.2
7.2 Harmonized 48 graphic key keyboard arrangement.3
8 Functions of the alphanumeric zone of the alphanumeric section.4
8.1 Allocation of graphic characters .4
8.2 Allocation of functions to non-graphic keys .5
8.3 Minimum function key requirements.6
8.3
...

INTERNATIONAL ISO/IEC
STANDARD 9995-2
Third edition
2009-10-15


Information technology — Keyboard
layouts for text and office systems —
Part 2:
Alphanumeric section
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 2: Module alphanumérique




Reference number
ISO/IEC 9995-2:2009(E)
©
ISO/IEC 2009

---------------------- Page: 1 ----------------------
ISO/IEC 9995-2:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2009 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 9995-2:2009(E)
Contents Page
Foreword .iv
1 Scope.1
2 Conformance .1
3 Normative references.1
4 Terms and definitions .1
5 Arrangement and Location.1
6 Division into zones.1
7 Arrangement and location of keys in the alphanumeric zone of the alphanumeric section.2
7.1 General keyboard arrangement.2
7.2 Harmonized 48 graphic key keyboard arrangement.3
8 Functions of the alphanumeric zone of the alphanumeric section.4
8.1 Allocation of graphic characters .4
8.2 Allocation of functions to non-graphic keys .5
8.3 Minimum function key requirements.6
8.3.1 Level 2 select .6
8.3.2 Level 3 select .6
8.3.3 Group select.6
8.3.4 Tabulation.7
8.3.5 Capitals lock/Level 2 lock/Generalized lock .7
8.3.6 Return.7
8.3.7 Backspace/Backward
...

NORME ISO/CEI
INTERNATIONALE 9995-2
Troisième édition
2009-10-15


Technologies de l'information —
Disposition des claviers conçus pour la
bureautique —
Partie 2:
Module alphanumérique
Information technology — Keyboard layouts for text and office
systems —
Part 2: Alphanumeric section




Numéro de référence
ISO/CEI 9995-2:2009(F)
©
ISO/CEI 2009

---------------------- Page: 1 ----------------------
ISO/CEI 9995-2:2009(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO/CEI 2009
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO/CEI 2009 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/CEI 9995-2:2009(F)
Sommaire Page
Avant-propos .iv
1 Domaine d'application .1
2 Conformité.1
3 Références normatives.1
4 Termes et définitions .1
5 Agencement et emplacement.1
6 Division en zones .1
7 Agencement et emplacement des touches dans la zone alphanumérique du module
alphanumérique.2
7.1 Agencement général du clavier .2
7.2 Agencement de clavier harmonisé à 48 touches graphiques.3
8 Fonctions de la zone alphanumérique du module alphanumérique.4
8.1 Affectation des caractères graphiques.4
8.2 Affectation de fonctions aux touches non graphiques .5
8.3 Exigences minimales de touches de fonction.6
8.3.1 Sélection du niveau 2.6
8.3.2 Sélection du niveau 3.6
8.3.3 Sélection de groupe .6
8.3.4 Tabulation.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.