Textiles — Quantitative chemical analysis — Part 13: Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone)

This document specifies a method, using carbon disulfide/acetone, to determine the mass percentage of chlorofibre, after removal of non-fibrous matter, in textiles made of mixtures of — certain chlorofibres, with — wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, elastomultiester, acrylic, melamine, polypropylene, polypropylene/polyamide bicomponent, polyacrylate and glass fibres. It is also possible to analyse mixtures containing chlorofibres by using the test methods described in ISO 1833-17 or ISO 1833-21.

Textiles — Analyse chimique quantitative — Partie 13: Mélanges de certaines chlorofibres avec certaines autres fibres (méthode au sulfure de carbone/acétone)

Le présent document spécifie une méthode de détermination, au sulfure de carbone/acétone, de la masse exprimée en pourcentage de chlorofibres, après élimination des matières non fibreuses, dans les textiles composés de mélanges de: — certaines chlorofibres avec — laine, poils animaux, soie, coton, viscose, cupro, modal, lyocell, polyamide, polyester, élastomultiester, acrylique, mélamine, polypropylène, bicomposant polypropylène/polyamide, polyacrylate et fibres de verre. Il est également possible d'analyser les mélanges contenant des chlorofibres à l'aide des méthodes d'essai décrites dans l'ISO 1833‑17 ou l'ISO 1833‑21.

General Information

Status
Published
Publication Date
03-Oct-2019
Current Stage
6060 - International Standard published
Start Date
04-Oct-2019
Due Date
24-Oct-2019
Completion Date
04-Oct-2019
Ref Project

Relations

Buy Standard

Standard
ISO 1833-13:2019 - Textiles -- Quantitative chemical analysis
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 1833-13:2019 - Textiles -- Analyse chimique quantitative
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 1833-13
Second edition
2019-10
Textiles — Quantitative chemical
analysis —
Part 13:
Mixtures of certain chlorofibres with
certain other fibres (method using
carbon disulfide/acetone)
Textiles — Analyse chimique quantitative —
Partie 13: Mélanges de certaines chlorofibres avec certaines autres
fibres (méthode au sulfure de carbone/acétone)
Reference number
ISO 1833-13:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 1833-13:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 1833-13:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus . 2
7 Test procedure . 2
8 Calculation and expression of results . 3
9 Precision . 3
Bibliography . 4
© ISO 2019 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 1833-13:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 38, Textiles.
This second edition cancels and replaces the first edition (ISO 1833-13:2006), which has been
technically revised. The main changes compared to the previous edition are as follows:
— the title has been changed from “Mixtures of certain chlorofibres and certain other fibres (method
using carbon disulfide/acetone)” to “Mixtures of certain chlorofibres with certain other fibres
(method using carbon disulfide/acetone)”;
— in Clause 1:
— several remaining fibres have been added;
— references on other methods used for analysing mixtures containing chlorofibes have been added
...

NORME ISO
INTERNATIONALE 1833-13
Deuxième édition
2019-10
Textiles — Analyse chimique
quantitative —
Partie 13:
Mélanges de certaines chlorofibres
avec certaines autres fibres (méthode
au sulfure de carbone/acétone)
Textiles — Quantitative chemical analysis —
Part 13: Mixtures of certain chlorofibres with certain other fibres
(method using carbon disulfide/acetone)
Numéro de référence
ISO 1833-13:2019(F)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 1833-13:2019(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2019
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
Fax: +41 22 749 09 47
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2019 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 1833-13:2019(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe . 1
5 Réactifs . 2
6 Appareillage . 2
7 Mode opératoire d’essai. 2
8 Calcul et expression des résultats . 3
9 Fidélité . 3
Bibliographie . 4
© ISO 2019 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 1833-13:2019(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/directives).
L’attention est attirée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l’élaboration du document sont indiqués dans l’Introduction et/ou dans la liste des déclarations de
brevets reçues par l’ISO (voir www .iso .org/brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l’ISO liés à l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion
de l’ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir le lien suivant: www .iso .org/iso/fr/avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 38, Textiles.
Cette deuxième édition annule et remplace la première édition (ISO 1833-13:2006), qui a fait l’objet
d’une révision technique. Les principales modifications par rapport à l’édition précédente sont les
suivantes:
— le titre a été modifié de «Mélanges de certaines chlorofibres et de certaines autres fibres (méthode
au sulfure de carbone/acétone)» en «Mélange de certaines chlorofibres avec certaines autres fibres
(méthode au sulfure de carbone/acétone)»;
— dans l’Article 1:
— plusieurs fibres résiduelles ont été ajoutées;
— des références à d’autres méthodes utilisées pour analyser des mélanges contenant des
chlorofibres ont été ajoutées;
— en 5.2, «92 % minimum en volume» a été ajouté pour l’éthanol;
— dans l’Article 7, un facteur d spécifique po
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.