ISO 28981:2009/Amd 1:2015
(Amendment)Mopeds - Methods for setting the running resistance on a chassis dynamometer - Amendment 1
Mopeds - Methods for setting the running resistance on a chassis dynamometer - Amendment 1
Cyclomoteurs — Méthodes pour fixer la résistance à l'avancement sur un banc dynamométrique — Amendement 1
General Information
Relations
Frequently Asked Questions
ISO 28981:2009/Amd 1:2015 is a standard published by the International Organization for Standardization (ISO). Its full title is "Mopeds - Methods for setting the running resistance on a chassis dynamometer - Amendment 1". This standard covers: Mopeds - Methods for setting the running resistance on a chassis dynamometer - Amendment 1
Mopeds - Methods for setting the running resistance on a chassis dynamometer - Amendment 1
ISO 28981:2009/Amd 1:2015 is classified under the following ICS (International Classification for Standards) categories: 43.140 - Motorcycles and mopeds. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 28981:2009/Amd 1:2015 has the following relationships with other standards: It is inter standard links to ISO 28981:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 28981:2009/Amd 1:2015 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 28981
First edition
2009-11-01
AMENDMENT 1
2015-11-01
Mopeds - Methods for setting the
running resistance on a chassis
dynamometer
AMENDMENT 1
Cyclomoteurs — Méthodes pour fixer la résistance à l’avancement sur
un banc dynamométrique
AMENDEMENT 1
Reference number
ISO 28981:2009/Amd.1:2015(E)
©
ISO 2015
ISO 28981:2009/Amd.1:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
ISO 28981:2009/Amd.1:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...