Textiles — Quantitative chemical analysis — Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content)

ISO 1833-15:2006 specifies a method, by determining the nitrogen content, to calculate the proportion of each component, after the removal of non-fibrous matter, in textiles made of binary mixtures of jute and animal fibres. The animal-fibre component may consist solely of hair or wool, or of any mixtures of the two. ISO 1833-15:2006 is not applicable to products in which dyestuffs or finishes contain nitrogen.

Textiles — Analyse chimique quantitative — Partie 15: Mélanges de jute et de certaines fibres animales (méthode par dosage de l'azote)

L'ISO 1833-15:2006 spécifie une méthode de détermination, par dosage de l'azote, de la proportion de chaque constituant, après élimination des matières non fibreuses, dans les textiles composés de mélanges binaires de jute et de fibres animales. La fibre animale constituante peut être soit du poil seul, soit de la laine seule, soit un mélange quelconque des deux. L'ISO 1833-15:2006 ne s'applique pas aux matières contenant des colorants ou des apprêts azotés.

General Information

Status
Withdrawn
Publication Date
01-Jun-2006
Withdrawal Date
01-Jun-2006
Current Stage
9599 - Withdrawal of International Standard
Completion Date
06-Nov-2019
Ref Project

Relations

Buy Standard

Standard
ISO 1833-15:2006 - Textiles -- Quantitative chemical analysis
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 1833-15:2006 - Textiles -- Analyse chimique quantitative
French language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 1833-15
First edition
2006-06-01

Textiles — Quantitative chemical
analysis —
Part 15:
Mixtures of jute and certain animal fibres
(method by determining nitrogen content)
Textiles — Analyse chimique quantitative —
Partie 15: Mélanges de jute et de certaines fibres animales (méthode
par dosage de l'azote)




Reference number
ISO 1833-15:2006(E)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 1833-15:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2006 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 1833-15:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 1833-15 was prepared by Technical Committee ISO/TC 38, Textiles.
This first edition of ISO 1833-15 cancels and replaces Clause 14 of ISO 1833:1977.
ISO 1833:1977 will be cancelled and replaced by ISO 1833-1, ISO 1833-3, ISO 1833-4, ISO 1833-5,
ISO 1833-6, ISO 1833-7, ISO 1833-8, ISO 1833-9, ISO 1833-10, ISO 1833-11, ISO 1833-12, ISO 1833-13,
ISO 1833-14, ISO 1833-15, ISO 1833-16, ISO 1833-17, ISO 1833-18 and ISO 1833-19.
ISO 1833 consists of the following parts, under the general title Textiles — Quantitative chemical analysis:
⎯ Part 1: General principles of testing
⎯ Part 2: Ternary fibre mixtures
⎯ Part 3: Mixtures of acetate and certain other fibres (method using acetone)
⎯ Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite)
⎯ Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
⎯ Part 7: Mixtures of polyamide and certain other fibres (method using formic acid)
⎯ Part 8: Mixtures of acetate and triacetate fibres (method using acetone)
⎯ Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol)
⎯ Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane)
⎯ Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid)
⎯ Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other
fibres (method using dimethylformamide)
⎯ Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone)
© ISO 2006 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 1833-15:2006(E)
⎯ Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid)
⎯ Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content)
⎯ Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene)
⎯ Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using
sulfuric acid)
⎯ Part 18: Mixtures of silk and wool or hair (method using sulfuric acid)
⎯ Part 19: Mixtures of cellulose fibres and asbestos (method by heating)
⎯ Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain
other fibres (method using cyclohexanone)
The following parts are under preparation:
⎯ Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using
formic acid and zinc chloride)
⎯ Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide)
⎯ Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using
formic acid and zinc chlorate)
⎯ Part 23: Mixtures of polyethylene and polypropylene (method using cyclohexanone)
⎯ Part 24: Mixtures of polyester and some other fibres (method using phenol and tetrachloroethane)

iv © ISO 2006 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 1833-15:2006(E)

Textiles — Quantitative chemical analysis —
Part 15:
Mixtures of jute and certain animal fibres (method by
determining nitrogen content)
1 Scope
This part of ISO 1833 specifies a method, by determining the nitrogen content, to calculate the proportion of
each component, after the removal of non-fibrous matter, in textiles made of binary mixtures of
⎯ jute
and
⎯ animal fibres.
The animal-fibre component may consist solely of hair or wool, or of any mixtures of the two.
This part of ISO 1833 is not applicable to products in which dyestu
...

NORME ISO
INTERNATIONALE 1833-15
Première édition
2006-06-01


Textiles — Analyse chimique
quantitative —
Partie 15:
Mélanges de jute et de certaines fibres
animales (méthode par dosage de l'azote)
Textiles — Quantitative chemical analysis —
Part 15: Mixtures of jute and certain animal fibres (method by
determining nitrogen content)




Numéro de référence
ISO 1833-15:2006(F)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 1833-15:2006(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2006
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO 2006 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 1833-15:2006(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO 1833-15 a été élaborée par le comité technique ISO/TC 38, Textiles.
Cette première édition de l'ISO 1833-15 annule et remplace l'Article 14 de l'ISO 1833:1977.
L'ISO 1833:1997 sera annulée et remplacée par l'ISO 1833-1, l'ISO 1833-3, l'ISO 1833-4, l'ISO 1833-5,
l'ISO 1833-6, l'ISO 1833-7, l'ISO 1833-8, l'ISO 1833-9, l'ISO 1833-10, l'ISO 1833-11, l'ISO 1833-12,
l'ISO 1833-13, l'ISO 1833-14, l'ISO 1833-15, l'ISO 1833-16, l'ISO 1833-17, l'ISO 1833-18 et l'ISO 1833-19.
L'ISO 1833 comprend les parties suivantes, présentées sous le titre général Textiles — Analyse chimique
quantitative:
⎯ Partie 1: Principes généraux des essais
⎯ Partie 2: Mélanges ternaires de fibres
⎯ Partie 3: Mélanges d'acétate et de certaines autres fibres (méthode à l'acétone)
⎯ Partie 4: Mélanges de certaines fibres protéiniques et de certaines autres fibres (méthode à
l'hypochlorite)
⎯ Partie 5: Mélanges de viscose, cupro ou modal et de fibres de coton (méthode au zincate de sodium)
⎯ Partie 7: Mélanges de polyamide et de certaines autres fibres (méthode à l'acide formique)
⎯ Partie 8: Mélanges de fibres d'acétate et de triacétate (méthode à l'acétone)
⎯ Partie 9: Mélanges de fibres d'acétate et de triacétate (méthode à l'alcool benzylique)
⎯ Partie 10: Mélanges de triacétate ou de polylactide et de certaines autres fibres (méthode au
dichlorométhane)
⎯ Partie 11: Mélanges de fibres de cellulose et de polyester (méthode à l'acide sulfurique)
© ISO 2006 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 1833-15:2006(F)
⎯ Partie 12: Mélanges d'acrylique, certains modacryliques, certaines chlorofibres, certains élasthannes et
de certaines autres fibres (méthode au diméthylformamide)
⎯ Partie 13: Mélanges de certaines chlorofibres et de certaines autres fibres (méthode au sulfure de
carbone/acétone)
⎯ Partie 14: Mélanges d'acétate et de certaines chlorofibres (méthode à l'acide acétique)
⎯ Partie 15: Mélanges de jute et de certaines fibres animales (méthode par dosage de l'azote)
⎯ Partie 16: Mélanges de fibres de polypropylène et de certaines autres fibres (méthode au xylène)
⎯ Partie 17: Mélanges de chlorofibres (homopolymères de chlorure de vinyle) et de certaines autres fibres
(méthode à l'acide sulfurique)
⎯ Partie 18: Mélanges de soie et de laine ou poils (méthode à l'acide sulfurique)
⎯ Partie 19: Mélanges de fibres de cellulose et d'amiante (méthode par chauffage)
⎯ Partie 21: Mélanges de chlorofibres, certains modacryliques, certains élasthannes, acétates, triacétates
et de certaines autres fibres (méthode à la cyclohexanone)
Les parties suivantes sont en cours d'élaboration:
⎯ Partie 6: Mélanges de viscose ou de certains types de cupro, modal ou lyocell et de fibres de coton
(méthode à l'acide formique et au chlorure de zinc)
⎯ Partie 20: Mélanges d'élasthanne et de certaines autres fibres (méthode au diméthylacétamide)
⎯ Partie 22: Mélanges de viscose ou de certains types de cupro, modal ou lyocell et de fibres de lin
(méthode à l'acide formique et au chlorate de zinc)
⎯ Partie 23: Mélanges de polyéthylène et de polypropylène (méthode à la cyclohexanone)
⎯ Partie 24: Mélanges de polyester et de certaines autres fibres (méthode au phénol et au tétrachloréthane)

iv © ISO 2006 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 1833-15:2006(F)

Textiles — Analyse chimique quantitative —
Partie 15:
Mélanges de jute et de certaines fibres animales (méthode par
dosage de l'azote)
1 Domaine d'application
La présente partie de l'ISO 1833 spécifie une méthode de détermination, par dosage de l'azote, de la
proportion de chaque constituant, après élimination des matières non fibreuses, dans les textiles composés
de mélanges binaires de
⎯ jute
et de
⎯ fibres animales.
La fibre animale constituante peut être soit du poil seul, soit de la laine seule, soit un mélange quelconque des
deux.
La présente partie de l'ISO 1833 ne s'applique pas aux matières contenant des colorants ou des apprêts
azotés.
NOTE Étant donné
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.