ISO 1803-1:1985

Building construction - Tolerances - Vocabulary - Part 1: General terms

Construction immobilière — Tolérances — Vocabulaire — Partie 1: Termes généraux

General Information

• Status: Withdrawn
• Publication Date: 03-Jul-1985
• Withdrawal Date: 03-Jul-1985
• ICS: 01.040.91 - Construction materials and building (Vocabularies)
• ICS: 91.010.30 - Technical aspects
• Technical Committee: ISO/TC 59 - Buildings and civil engineering works
• Drafting Committee: ISO/TC 59 - Buildings and civil engineering works
• Current Stage: 9599 - Withdrawal of International Standard
• Start Date: 01-Oct-1997
• Completion Date: 13-Dec-2025

Relations

• Revised: ISO 1803:1997 - Building construction - Tolerances - Expression of dimensional accuracy - Principles and terminology
• Effective Date: 15-Apr-2008
• Revises: ISO 1803:1973 - Tolerances for building - Vocabulary
• Effective Date: 15-Apr-2008

Standards Content (Sample)

1803/l
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDlZATlON.ME)I(,QYHAPO~HAR OPTAHM3AlJMR f-l0 CTAH~APTM3ALWlt ’l.ORGANISATlON INTERNATIONALE DE NORMALISATION
Building construction - Tolerances - Vocabulary -
Part 1 : General terms
Construction immobili&re - Toldrances - Vocabulaire -. Partie 7 : Termes g&&aux
Second edition - 1985-07-01
iz
-
Ref. No. IS0 1803/1-1985(E)
UDC 72.011 : 004.1
0)
F
I
Descriptors : buildings, dimensional tolerances, vocabulary.
c
m
Price based on 4 pages
i
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 1803/l was prepared by Technical Committee ISO/TC 59,
Building construction.
IS0 1803 was first published in 1973. This second edition consists of IS0 1803/l and
IS0 1803/Z, which together cancel and replace the first edition, of which they are a
technical revision.
@ International Organization for Staridardization, 1985 0
Printed in Switzerland
INTERNATIONAL STANDARD IS0 1803/l-1985 (E)
Building construction - Tolerances - Vocabulary -
Part 1 : General terms
0 Introduction 3 Terms and definitions (see also the annex)
The terms and definitions given in this International Standard
3.1 Terms concerning dimensions
reflect continuing developments in the understanding of the
problems posed by the presence of unavoidable variations in
3.1.1 dimension (physical quantity)l) : Extent of a body or of
the dimensional characteristics of components and structures.
a space in a given direction (for example, length, width, height,
depth, diameter) or along a given line (for example, cir-
The terms and definitions given in this part of IS0 1803 con-
cumference).
stitute a basic vocabulary relating to the calculation of sizes, to
specification and to control to achieve conformity with
specifications.
3.1.2 size (numerical value) : Magnitude of a dimension in
terms of a defined unit.
Definitions of derived terms are given in IS0 1803/2.
3.1.3 reference size2) : Size specified in the design to which
deviations are related.
1 Scope and field of application
3.1.4 target size : Reference size from which deviations
would ideally be zero.
This part of IS0 1803 defines general terms needed for the
study, specification and use of dimensional tolerances for
building.
3.1.5 actual size : Size obtained by measurement (after cor-
rection of known measurement errors).
NOTE - Terms printed in italics in the definitions are themselves de-
fined in this part of IS0 1803.
3.1.6 limits of size, upper and lower : Maximum and
minimum sizes at or between which the actual size shall lie.
2 Reference physical conditions
3.1.7 tolerance (physical quantityI3) : Permitted variation of
size.
In principle, a statement of reference physical c
...